Wraps by car

Triumph Stag wrap

The Triumph Stag wrap guide covers the first generation produced from 1970 to 1977. This sports car came as a two-door convertible with a length of 173.0 in (4,394 mm). A full vinyl wrap of the newest body takes about 39 ft (12 m) of 60-inch (1.52 m) cast film.

1generations12 mof film for a full wrap

Triumph Stag, first generation, factory photo
Triumph Stag, first generation. Factory color shown.

Triumph Stag wrap colors and ideas

  • Stag black wrap
  • Stag white wrap
  • Stag gray wrap
  • Stag silver wrap
  • Stag red wrap
  • Stag blue wrap
  • Stag green wrap
  • Stag yellow wrap
  • Stag orange wrap
  • Stag purple wrap
  • Stag pink wrap
  • Stag teal wrap
  • Stag brown wrap
  • Stag gold wrap
  • Stag chrome wrap
  • Stag color shift wrap
  • Stag carbon fiber wrap
  • Stag camo and patterned wrap

How much vinyl to wrap a Triumph Stag

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1970–1977convertible (2 doors)173.0 in (4,394 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)

Stag wrap cost factors

Stag wrap cost depends on the size of the body at 173.0 in (4,394 mm) long and the film used. A full wrap takes about 39 ft (12 m) of 60-inch (1.52 m) cast film, and chrome or patterned film needs about 51 ft (15.5 m). The convertible body adds labor because the fabric top must be worked around and a folding hard top is wrapped as its own panels.

  • Film for a full wrap: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Stag wraps by generation

Swipe sideways. Tap a card for the full description.

Triumph Stag, first generation, factory photo
Factory color shown

1970–1977 Stag convertible (first generation)

1970–1977convertible (2 doors)173.0 in (4,394 mm)

The first generation Triumph Stag has a convertible body with an open top that is not wrapped. The film ends where the fabric top begins, so the transition must be cut and finished carefully. A folding hard top, when present, is wrapped as panels of its own rather than as one continuous surface.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Stag

A partial wrap on a Triumph Stag can cover the hood, mirror caps, or rear deck. Stag chrome delete applies black film to window trim and badges. Paint protection film (PPF) is used on the front end as a clear protective layer.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Triumph Stag: body, cut-outs and film

The Triumph Stag vinyl wrap is planned around a convertible body that measures 173.0 in (4,394 mm) long. The fabric top is not wrapped, so the film ends where the top begins. A folding hard top, when fitted, is wrapped as separate panels of its own.

Stag wrap ideas benefit from knowing which parts need cut-outs or come off. The convertible body requires the film to stop cleanly at the edges of the fabric top. A folding hard top is treated as panels of its own, so each panel is trimmed and wrapped individually.

For anyone counting film, there is only one generation of the Triumph Stag in this catalog. The length of 173.0 in (4,394 mm) is the same across all production years from 1970 to 1977. How much vinyl to wrap a Stag therefore does not change between generations.

Questions about wrapping a Triumph Stag

How much vinyl does it take to wrap a Triumph Stag?

About 39 ft (12 m) of 60-inch (1.52 m) cast film is needed to wrap a Triumph Stag. This estimate is for the newest body of the only generation, which is 173.0 in (4,394 mm) long. Chrome or patterned film requires more, about 51 ft (15.5 m).

Is the top of a Stag wrapped?

No, the fabric top of a Triumph Stag is not wrapped. The film ends where the top begins, and only the body panels are covered. A folding hard top, if fitted, is wrapped as separate panels of its own.

Can I wrap only the hood or the roof of a Stag?

Yes, you can wrap only the hood or the rear deck of a Triumph Stag as part of a partial wrap. Mirror caps can also be wrapped individually. The roof is not a standard panel because the car is a convertible with a fabric top.

Is a Stag hard to wrap?

A Triumph Stag adds work because of its convertible body and folding hard top option. The fabric top is not wrapped, so the film must be cut and finished precisely where the top begins. The hard top is wrapped as its own panels, and the car is 173.0 in (4,394 mm) long.