Wraps by car

Triumph TR6 wrap

The Triumph TR6 wrap page covers the 1968–1976 sports car in its single generation. A full vinyl wrap of the newest TR6 body uses about 39 ft (12 m) of 60-inch (1.52 m) cast film. The convertible is listed at 155.5 in (3,950 mm) long.

1generations12 mof film for a full wrap

Triumph TR6, first generation, factory photo
Triumph TR6, first generation. Factory color shown.

Triumph TR6 wrap colors and ideas

  • Triumph TR6 black wrap
  • Triumph TR6 white wrap
  • Triumph TR6 gray wrap
  • Triumph TR6 silver wrap
  • Triumph TR6 red wrap
  • Triumph TR6 blue wrap
  • Triumph TR6 green wrap
  • Triumph TR6 yellow wrap
  • Triumph TR6 orange wrap
  • Triumph TR6 purple wrap
  • Triumph TR6 pink wrap
  • Triumph TR6 teal wrap
  • Triumph TR6 brown wrap
  • Triumph TR6 gold wrap
  • Triumph TR6 chrome wrap
  • Triumph TR6 color shift wrap
  • Triumph TR6 carbon fiber wrap
  • Triumph TR6 camo and patterned wrap

How much vinyl to wrap a Triumph TR6

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1968–1976convertible (2 doors)155.5 in (3,950 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m)

Triumph TR6 wrap cost factors

Triumph TR6 wrap cost is set by the amount of film, the prep time and the number of cut-outs on the 1968–1976 convertible. A full color change uses about 39 ft (12 m) of 60-inch (1.52 m) cast film, while chrome or patterned film takes about 46 ft (14 m). The fabric top and the trim around it add hand-cutting time.

  • Film for a full wrap: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Triumph TR6 wraps by generation

Swipe sideways. Tap a card for the full description.

Triumph TR6, first generation, factory photo
Factory color shown

1968–1976 Triumph TR6 convertible (first generation)

1968–1976convertible (2 doors)155.5 in (3,950 mm)

The open top of the Triumph TR6 is not wrapped and the film ends where the fabric begins. A folding hard top is wrapped as panels of its own, with the film cut at each edge. On the first generation convertible this leaves a clean line around the cockpit.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).

Roof, hood, chrome delete and PPF on a Triumph TR6

A partial wrap on a Triumph TR6 can cover the hood, mirror caps and rear deck. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Triumph TR6: body, cut-outs and film

A Triumph TR6 vinyl wrap must allow for the convertible body and its 155.5 in (3,950 mm) length. The two-door convertible shape keeps the main panels short and the bumper lines simple. Film joins are planned around the door cut lines and the rear deck opening.

Triumph TR6 wrap ideas begin with the places where film must stop. The fabric top is not wrapped and the film ends where it begins at the body line. A folding hard top is wrapped as panels of its own, with seams at its edges.

How much vinyl to wrap a Triumph TR6 depends on the single 1968–1976 generation in the catalog. The convertible body of this car takes about 39 ft (12 m) of 60-inch (1.52 m) cast film for a full color change. If chrome or patterned film is used, the estimate rises to about 46 ft (14 m).

Questions about wrapping a Triumph TR6

How much vinyl does it take to wrap a Triumph TR6?

It takes about 39 ft (12 m) of 60-inch (1.52 m) cast film to wrap a Triumph TR6. If you use chrome or patterned film, the estimate is about 46 ft (14 m). The convertible body is 155.5 in (3,950 mm) long.

Is the top of a Triumph TR6 wrapped?

No, the top of a Triumph TR6 is not wrapped. The fabric top is left as it is and the film ends where the top begins. A folding hard top is wrapped as panels of its own.

Can I wrap only the hood or the roof of a Triumph TR6?

Yes, you can wrap only the hood or the rear deck of a Triumph TR6. A partial wrap on this car covers the hood, mirror caps and rear deck. The roof is not a panel because the top is fabric and not wrapped.

Is a Triumph TR6 hard to wrap?

A Triumph TR6 is a small convertible, so the body panels are short but the trim work adds time. The fabric top is not wrapped and the film must end cleanly where it begins. A folding hard top is wrapped as separate panels, which calls for extra cutting.