Wraps by car

Triumph TR5 wrap

This page covers the Triumph TR5 wrap in full, including how much vinyl wrap a first-generation TR5 takes and what a color change wrap involves. The Triumph TR5 is a two-seat sports car built from 1967–1968, with only one generation in this catalog. The car is a convertible with two doors, and a full wrap of the newest body takes approximately 45 square feet (4.2 square meters) of film.

1generations

Triumph TR5, first generation, factory photo
Triumph TR5, first generation. Factory color shown.

Triumph TR5 wrap colors and ideas

  • Triumph TR5 black wrap
  • Triumph TR5 white wrap
  • Triumph TR5 gray wrap
  • Triumph TR5 silver wrap
  • Triumph TR5 red wrap
  • Triumph TR5 blue wrap
  • Triumph TR5 green wrap
  • Triumph TR5 yellow wrap
  • Triumph TR5 orange wrap
  • Triumph TR5 purple wrap
  • Triumph TR5 pink wrap
  • Triumph TR5 teal wrap
  • Triumph TR5 brown wrap
  • Triumph TR5 gold wrap
  • Triumph TR5 chrome wrap
  • Triumph TR5 color shift wrap
  • Triumph TR5 carbon fiber wrap
  • Triumph TR5 camo and patterned wrap

How much vinyl to wrap a Triumph TR5

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1967–1968convertible (2 doors)——

Triumph TR5 wrap cost factors

The Triumph TR5 wrap cost is affected by the car's small size, the film you choose, and the condition of the paint and panels. Because the body is a compact two-door convertible, it uses less material than a large sedan, but the curves and recessed areas add labor time. The number of pieces you want wrapped, such as just the hood or the whole body, also changes the cost. Any repairs needed before wrapping, like filling chips or sanding rust, will add to the total.

  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Triumph TR5 wraps by generation

Swipe sideways. Tap a card for the full description.

Triumph TR5, first generation, factory photo
Factory color shown

1967–1968 Triumph TR5 convertible (first generation)

1967–1968convertible (2 doors)

On the first generation Triumph TR5, the open top is not wrapped and the film ends where the fabric or folding hard top begins. For the standard fabric convertible top, no film is applied to the soft material, and the wrap stops cleanly at the edges of the body. If the car has a folding hard top, that top is wrapped as individual panels of its own, with separate seams. This approach keeps the wrap lines neat and avoids damage to the folding mechanism.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Roof, hood, chrome delete and PPF on a Triumph TR5

Partial wrap options on a Triumph TR5 include the hood, mirror caps, and rear deck, letting you change the look without covering the whole car. Chrome delete covers window trim and badges with black film for a darker appearance. Paint protection film (PPF) is applied as a clear film on the front end to guard against stone chips. These smaller jobs are a good way to start with a wrap on this classic sports car.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Triumph TR5: body, cut-outs and film

A Triumph TR5 vinyl wrap has to follow the compact footprint of a 1960s British sports car, which means careful planning of every panel. The car is a two-door convertible, so the body is smaller than a modern sedan but has deep curves around the fenders and doors. Because the car is a convertible, the film coverage is limited to the metal body panels and does not include the fabric top. Knowing the body style and size helps you order the right amount of film and avoid waste.

Triumph TR5 wrap ideas should account for the open-top layout and the small trim pieces that need extra attention. On this convertible, the fabric top is not wrapped and the film ends where the top begins; a folding hard top would be wrapped as separate panels of its own. The door handles, side mirrors, and chrome bumpers are the main parts that need cut-outs or are removed for a cleaner finish. Planning these details in advance makes the installation neater and reduces the chance of lifting edges later.

How much vinyl to wrap a Triumph TR5 depends on the single generation sold from 1967–1968, since there is only one body style in this catalog. The first generation was produced for just two years, and the body remained the same throughout that run. Unlike cars with multiple generations, there are no major differences in panel sizes or shapes to account for. For counting film, you only need the measurements of this one convertible body.

Questions about wrapping a Triumph TR5

How much vinyl does it take to wrap a Triumph TR5?

A full wrap of a Triumph TR5 takes about 45 square feet (4.2 square meters) of vinyl, based on the first-generation convertible body. That figure includes some extra material for trimming and mistakes. The car's small size means it uses less film than a modern coupe or sedan. Always buy a little more than the exact estimate to allow for waste on curved panels.

Is the top of a Triumph TR5 wrapped?

The top of a Triumph TR5 is not wrapped because it is a fabric convertible top that would not hold the film. The wrap ends where the top begins, leaving the soft top in its original color and material. If the car has a folding hard top, that hard top can be wrapped as separate panels, but the soft top is always left uncovered. This is standard practice for convertible wraps.

Can I wrap only the hood or the roof of a Triumph TR5?

Yes, you can wrap only the hood or the roof of a Triumph TR5 as a partial wrap. The hood is a common single panel to wrap, and the mirror caps and rear deck are also options. If you mean the roof, note that the soft top is not wrapped, but a hard top panel would be. Partial wrap jobs like these let you change the look without covering the entire body.

Is a Triumph TR5 hard to wrap?

The Triumph TR5 is not difficult to wrap for an experienced installer, but the soft top, small trim, and curved panels add extra work. The fabric top must be avoided, so the film has to be cut and tucked precisely along the edges where the top meets the body. The small size of the car means less material, but the tight curves around the fenders require more stretching and heat. Removing parts like mirrors and handles also takes time but gives a cleaner result.