Wraps by car

Triumph Spitfire wrap

The Triumph Spitfire wrap page covers the 1965–1980 two-door convertible. Three generations are listed, with the newest body using about 34 ft (10.5 m) of 60-inch (1.52 m) cast vinyl wrap for a full color change.

3generations10.5 mof film for a full wrap

Triumph Spitfire, fifth generation, factory photo
Triumph Spitfire, fifth generation. Factory color shown.

Triumph Spitfire wrap colors and ideas

  • Spitfire black wrap
  • Spitfire white wrap
  • Spitfire gray wrap
  • Spitfire silver wrap
  • Spitfire red wrap
  • Spitfire blue wrap
  • Spitfire green wrap
  • Spitfire yellow wrap
  • Spitfire orange wrap
  • Spitfire purple wrap
  • Spitfire pink wrap
  • Spitfire teal wrap
  • Spitfire brown wrap
  • Spitfire gold wrap
  • Spitfire chrome wrap
  • Spitfire color shift wrap
  • Spitfire carbon fiber wrap
  • Spitfire camo and patterned wrap

How much vinyl to wrap a Triumph Spitfire

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1974–1980convertible (2 doors)147.0 in (3,734 mm)about 34 ft (10.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m)
1967–1970convertible (2 doors)147.0 in (3,734 mm)about 34 ft (10.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m)
1965–1967convertible (2 doors)145.0 in (3,683 mm)about 34 ft (10.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m)

Spitfire wrap cost factors

Spitfire wrap cost is driven by the film type, the condition of the paint, and the number of panels removed for a clean install. A solid cast film on this car uses about 34 ft (10.5 m), while a patterned or chrome film uses about 41 ft (12.5 m). A convertible with a folding hard top adds separate panels to wrap. The age of a 1965–1980 car may mean more prep time if the paint is cracked or lifting.

  • Film for a full wrap: about 34 ft (10.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Spitfire wraps by generation

Swipe sideways. Tap a card for the full description.

Triumph Spitfire, fifth generation, factory photo
Factory color shown

1974–1980 Spitfire convertible (fifth generation)

1974–1980convertible (2 doors)147.0 in (3,734 mm)

The fifth generation Spitfire is an open-top convertible, so the fabric top is not wrapped and the film ends where the top begins. If the car has a folding hard top, that hard top is wrapped as panels of its own with the film tucked around the edges. The body panels below the beltline are wrapped as usual, and the film is cut cleanly at the top of the doors and rear deck.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 34 ft (10.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m).

Triumph Spitfire, third generation, factory photo
Factory color shown

1967–1970 Spitfire convertible (third generation)

1967–1970convertible (2 doors)147.0 in (3,734 mm)

The third generation Spitfire was built from 1967 to 1970, so paint age varies from original to several repaints. A test spot is applied to a small area before a full wrap to check how the film adheres to the old paint. Panels that have been repainted with poor quality paint may lift when the film is repositioned, so the installer will test first. The wrap can still be done, but the prep time may be longer.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 34 ft (10.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m).

Triumph Spitfire, second generation, factory photo
Factory color shown

1965–1967 Spitfire convertible (second generation)

1965–1967convertible (2 doors)145.0 in (3,683 mm)

The second generation Spitfire is the shortest of the three at 145.0 in (3,683 mm), and it has only two doors and a trunk lid. The smaller body means the same film estimate of about 34 ft (10.5 m) for solid color, but the number of panels is reduced by the absence of a roof. The convertible top is not wrapped, and the film ends at the top of the body. Fewer panels can make the install slightly faster than a closed car.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 34 ft (10.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m).

Roof, hood, chrome delete and PPF on a Spitfire

A partial wrap on a Spitfire can cover the hood, mirror caps, or the rear deck. A chrome delete on this car covers the window trim and badges with black film. Paint protection film (PPF) is often applied as a clear film on the front end to guard against stone chips.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Triumph Spitfire: body, cut-outs and film

A Triumph Spitfire vinyl wrap follows the compact contours of a classic sports car body. The convertible is 147.0 in (3,734 mm) long for the later generations and 145.0 in (3,683 mm) for the second generation. The open body means no roof film, so the main panels are the hood, doors, trunk lid, and rear quarters. The small size keeps the wrap area close to a modern compact coupe.

Spitfire wrap ideas begin with the body panels that are simple to cover on this car. The hood and trunk lid are flat enough for one-piece film, while the doors need cut-outs for handles and locks. The front and rear bumpers, the grille surround, and the side trim are often left off to wrap behind them for a cleaner edge.

How much vinyl to wrap a Spitfire depends on the generation and the film choice. All three generations list about 34 ft (10.5 m) of 60-inch (1.52 m) cast film for a solid color wrap. A chrome or patterned film needs about 41 ft (12.5 m) because the pattern must be matched across panels. The second generation is 2 inches shorter, but that does not change the film estimate.

Questions about wrapping a Triumph Spitfire

How much vinyl does it take to wrap a Triumph Spitfire?

A Triumph Spitfire takes about 34 ft (10.5 m) of 60-inch (1.52 m) cast vinyl for a full wrap. That figure is for a solid color film on the newest body listed, the fifth generation. A chrome or patterned film would use about 41 ft (12.5 m).

Is the top of a Spitfire wrapped?

No, the fabric top of a Spitfire is not wrapped, and the film ends where the top begins. A folding hard top is wrapped as panels of its own. The soft top is left in its original material.

Can I wrap only the hood or the roof of a Spitfire?

Yes, a partial wrap on a Spitfire can cover just the hood, mirror caps, or the rear deck. A chrome delete of the window trim and badges is also a smaller job. Paint protection film on the front end is another partial option.

Is a Spitfire hard to wrap?

A Spitfire is not especially hard to wrap, but the open top and old paint can add work. The convertible body means the film must be cut cleanly where the top meets the body. On a car of these years, old paint may need a test spot and extra prep.