Wraps by car

Triumph TR8 wrap

The Triumph TR8 wrap page covers this short-lived open sports car from 1980 to 1981. The catalog lists one generation, the first and only one. A full vinyl wrap of the convertible body takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film.

1generations11.5 mof film for a full wrap

Triumph TR8, first generation, factory photo
Triumph TR8, first generation. Factory color shown.

Triumph TR8 wrap colors and ideas

  • Triumph TR8 black wrap
  • Triumph TR8 white wrap
  • Triumph TR8 gray wrap
  • Triumph TR8 silver wrap
  • Triumph TR8 red wrap
  • Triumph TR8 blue wrap
  • Triumph TR8 green wrap
  • Triumph TR8 yellow wrap
  • Triumph TR8 orange wrap
  • Triumph TR8 purple wrap
  • Triumph TR8 pink wrap
  • Triumph TR8 teal wrap
  • Triumph TR8 brown wrap
  • Triumph TR8 gold wrap
  • Triumph TR8 chrome wrap
  • Triumph TR8 color shift wrap
  • Triumph TR8 carbon fiber wrap
  • Triumph TR8 camo and patterned wrap

How much vinyl to wrap a Triumph TR8

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1980–1981convertible (2 doors)160.1 in (4,067 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m)

Triumph TR8 wrap cost factors

Triumph TR8 wrap cost depends on the condition of the body and how much of the 38 ft (11.5 m) of film is used. A color change wrap covers the whole car, while chrome delete or partial jobs use less material. Removing trim and badges adds labor, as does wrapping a folding hard top if present.

  • Film for a full wrap: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Triumph TR8 wraps by generation

Swipe sideways. Tap a card for the full description.

Triumph TR8, first generation, factory photo
Factory color shown

1980–1981 Triumph TR8 convertible (first generation)

1980–1981convertible (2 doors)160.1 in (4,067 mm)

The first generation Triumph TR8 has a convertible body whose fabric top is not wrapped, and the film ends where the top begins. If a folding hard top is fitted, it is wrapped as panels of its own. The rear deck and doors are the largest wrapped areas on this generation.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).

Roof, hood, chrome delete and PPF on a Triumph TR8

Partial wrap on a Triumph TR8 covers the hood, mirror caps, or rear deck. Chrome delete replaces bright window trim and badges with black film. Paint protection film (PPF) can be applied as clear film on the front end.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Triumph TR8: body, cut-outs and film

The Triumph TR8 vinyl wrap follows a two-door convertible body that is 160.1 in (4,067 mm) long. A fabric top is not wrapped, and the film ends where the top begins. The compact size keeps panel lengths short and makes a single-width roll of film enough for the sides.

Triumph TR8 wrap ideas start with the simple, flat body panels of a late 1970s design. The door handles and badges come off for a clean install, and the front bumper can be wrapped in place. The fabric top stays unwrapped, so the color break at the beltline becomes part of the design.

How much vinyl to wrap a Triumph TR8 is fixed by the single 1980–1981 body style. There are no earlier generations to compare for panel changes. The only variable is the top: a folding hard top, if fitted, is wrapped as panels of its own.

Questions about wrapping a Triumph TR8

How much vinyl does it take to wrap a Triumph TR8?

A Triumph TR8 takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film for a full wrap. Chrome or patterned film needs about 49 ft (15 m) because the pattern repeat wastes material. The estimate is for the convertible body without a hard top.

Is the top of a Triumph TR8 wrapped?

No, the top of a Triumph TR8 is not wrapped if it is the standard fabric top. The film ends where the fabric begins. A folding hard top, if fitted, is wrapped as panels of its own.

Can I wrap only the hood or the roof of a Triumph TR8?

Yes, you can wrap only the hood, mirror caps, or rear deck of a Triumph TR8. Chrome delete on the window trim and badges is another partial option. Clear paint protection film on the front end is also a smaller job than a full wrap.

Is a Triumph TR8 hard to wrap?

A Triumph TR8 is not hard to wrap because the panels are flat and the car is small at 160.1 in (4,067 mm) long. The convertible body means the fabric top is not wrapped, which reduces the area to cover. More work comes from removing badges and trim and from wrapping a folding hard top if present.