Wraps by car

Adler 2.5-litre Sport wrap

This page covers the Adler 2.5-litre Sport wrap for the single generation produced from 1938 to 1939. The car is a two-door coupe sports car with a length of 184.3 in (4,680 mm). A full vinyl wrap of the newest body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film, or about 64 ft (19.5 m) if using chrome or patterned film.

1generations17 mof film for a full wrap

Adler 2.5-litre Sport, first generation, factory photo
Adler 2.5-litre Sport, first generation. Factory color shown.

Adler 2.5-litre Sport wrap colors and ideas

  • Adler 2.5-litre Sport black wrap
  • Adler 2.5-litre Sport white wrap
  • Adler 2.5-litre Sport gray wrap
  • Adler 2.5-litre Sport silver wrap
  • Adler 2.5-litre Sport red wrap
  • Adler 2.5-litre Sport blue wrap
  • Adler 2.5-litre Sport green wrap
  • Adler 2.5-litre Sport yellow wrap
  • Adler 2.5-litre Sport orange wrap
  • Adler 2.5-litre Sport purple wrap
  • Adler 2.5-litre Sport pink wrap
  • Adler 2.5-litre Sport teal wrap
  • Adler 2.5-litre Sport brown wrap
  • Adler 2.5-litre Sport gold wrap
  • Adler 2.5-litre Sport chrome wrap
  • Adler 2.5-litre Sport color shift wrap
  • Adler 2.5-litre Sport carbon fiber wrap
  • Adler 2.5-litre Sport camo and patterned wrap

How much vinyl to wrap an Adler 2.5-litre Sport

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1938–1939coupe (2 doors)184.3 in (4,680 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Adler 2.5-litre Sport wrap cost factors

The Adler 2.5-litre Sport wrap cost depends on the film type and the car's surface area. For this vehicle, a full wrap needs about 56 ft (17 m) of 60-inch (1.52 m) cast film, or about 64 ft (19.5 m) if using chrome or patterned film. Additional work such as wrapping the long doors as single pieces also affects the total cost.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Adler 2.5-litre Sport wraps by generation

Swipe sideways. Tap a card for the full description.

Adler 2.5-litre Sport, first generation, factory photo
Factory color shown

1938–1939 Adler 2.5-litre Sport coupe (first generation)

1938–1939coupe (2 doors)184.3 in (4,680 mm)

The Adler 2.5-litre Sport first generation from 1938–1939 can have original or repainted panels due to its age. A test spot is recommended before a full wrap to check adhesion. Paint condition varies between panels, so each area should be inspected before film is applied.

Two long side doors: each door is one large piece of film.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on an Adler 2.5-litre Sport

For smaller jobs, you can wrap the roof, hood, or mirror caps of the Adler 2.5-litre Sport. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied as clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Adler 2.5-litre Sport: body, cut-outs and film

The Adler 2.5-litre Sport vinyl wrap involves a single coupe body style with two long side doors. Each door is one large piece of film, which adds work compared to smaller doors. The car's 184.3 in (4,680 mm) length means a full wrap requires careful planning for film usage.

When planning Adler 2.5-litre Sport wrap ideas, note the two long side doors are each wrapped as one large piece of film. No other parts are specified as needing cut-outs or removal for this car. The coupe body lines are straightforward, but the door size requires extra care during installation.

To determine how much vinyl to wrap an Adler 2.5-litre Sport, consider that there is only one generation from 1938–1939. Therefore no generation differences affect film amounts for a full wrap. The standard estimate is about 56 ft (17 m) of 60-inch (1.52 m) cast film, or about 64 ft (19.5 m) for chrome or patterned film.

Questions about wrapping an Adler 2.5-litre Sport

How much vinyl does it take to wrap an Adler 2.5-litre Sport?

It takes about 56 ft (17 m) of 60-inch (1.52 m) cast film to wrap an Adler 2.5-litre Sport. If you choose chrome or patterned film, the estimate is about 64 ft (19.5 m). These figures are for the newest and only body of this car.

Can I wrap only the hood or the roof of an Adler 2.5-litre Sport?

Yes, you can wrap only the hood or the roof of an Adler 2.5-litre Sport. Partial wrap options include the roof, hood, and mirror caps. You can also do a chrome delete on window trim and badges, or apply paint protection film to the front end.

Is an Adler 2.5-litre Sport hard to wrap?

An Adler 2.5-litre Sport is not especially hard to wrap, but the two long side doors add work because each door is one large piece of film. The car's coupe body has a length of 184.3 in (4,680 mm), which requires careful film handling. These large panels need extra attention during installation.

How many generations of the Adler 2.5-litre Sport does this page cover?

This page covers one generation of the Adler 2.5-litre Sport. The car was produced from 1938 to 1939 as a two-door coupe.