Wraps by car

Adler Standard 8 wrap

This page covers the Adler Standard 8 wrap for both generations of the luxury sedan. The catalog has the first generation from 1928–1930 and the second from 1931–1933. A full wrap of the newest body takes about 62 ft (19 m) of 60-inch (1.52 m) cast vinyl wrap.

2generations19 mof film for a full wrap

Adler Standard 8, second generation, factory photo
Adler Standard 8, second generation. Factory color shown.

Adler Standard 8 wrap colors and ideas

  • Standard 8 black wrap
  • Standard 8 white wrap
  • Standard 8 gray wrap
  • Standard 8 silver wrap
  • Standard 8 red wrap
  • Standard 8 blue wrap
  • Standard 8 green wrap
  • Standard 8 yellow wrap
  • Standard 8 orange wrap
  • Standard 8 purple wrap
  • Standard 8 pink wrap
  • Standard 8 teal wrap
  • Standard 8 brown wrap
  • Standard 8 gold wrap
  • Standard 8 chrome wrap
  • Standard 8 color shift wrap
  • Standard 8 carbon fiber wrap
  • Standard 8 camo and patterned wrap

How much vinyl to wrap an Adler Standard 8

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1931–1933sedan (4 doors)192.9 in (4,900 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)
1928–1930sedan (4 doors)187.0 in (4,750 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Standard 8 wrap cost factors

Standard 8 wrap cost depends on the size of the body and the amount of film needed. The second generation is 192.9 in (4,900 mm) long and uses about 62 ft (19 m) of film. The first generation is 187.0 in (4,750 mm) long and uses about 59 ft (18 m). The tall roof height also adds labor time.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: sedan (4 doors).
  • A tall body (70.9 in (1,800 mm)): the roof is wrapped from a platform.

Standard 8 wraps by generation

Swipe sideways. Tap a card for the full description.

Adler Standard 8, second generation, factory photo
Factory color shown

1931–1933 Standard 8 sedan (second generation)

1931–1933sedan (4 doors)192.9 in (4,900 mm)

The second generation Standard 8 from 1931–1933 has a body height of 70.9 in (1,800 mm). The roof is wrapped from a platform, which takes more time and care. This generation is 192.9 in (4,900 mm) long.

A tall body (70.9 in (1,800 mm)): the roof is wrapped from a platform.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Adler Standard 8, first generation, factory photo
Factory color shown

1928–1930 Standard 8 sedan (first generation)

1928–1930sedan (4 doors)187.0 in (4,750 mm)

The first generation Standard 8 from 1928–1930 may have original or repainted panels. A test spot on the paint comes before a full wrap to check adhesion. This generation is 187.0 in (4,750 mm) long and 74.0 in (1,880 mm) tall.

A tall body (74.0 in (1,880 mm)): the roof is wrapped from a platform.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Standard 8

A partial wrap on a Standard 8 can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film that can be applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Adler Standard 8: body, cut-outs and film

The Adler Standard 8 vinyl wrap covers a four-door sedan body in both generations. The second generation is 192.9 in (4,900 mm) long and the first is 187.0 in (4,750 mm). These large luxury bodies need more film than smaller cars. The tall roof adds working time.

Standard 8 wrap ideas include removing the tall roof, which requires a platform for safe access. The door handles, trim, and badges should come off for a clean install. Cut-outs are made for the door handles and any emblems left in place.

How much vinyl to wrap a Standard 8 depends on the generation you have. The second generation uses about 62 ft (19 m) of 60-inch (1.52 m) film, while the first uses about 59 ft (18 m). If you choose chrome or patterned film, add about 14 ft (4 m) to each figure.

Questions about wrapping an Adler Standard 8

How much vinyl does it take to wrap an Adler Standard 8?

It takes about 62 ft (19 m) of 60-inch (1.52 m) vinyl wrap to cover an Adler Standard 8 from the second generation. The first generation uses slightly less at about 59 ft (18 m).

Can I wrap only the hood or the roof of a Standard 8?

Yes, you can wrap only the hood or the roof of a Standard 8. A partial wrap can include the roof, hood, or mirror caps. The roof is tall and requires a platform for safe access.

Is a Standard 8 hard to wrap?

A Standard 8 is hard to wrap because of its tall body and long panels. The roof height is 70.9 in (1,800 mm) on the second generation and 74.0 in (1,880 mm) on the first. The roof must be wrapped from a platform, adding time and effort.

How many generations of the Standard 8 does this page cover?

This page covers two generations of the Standard 8. The first generation is from 1928–1930 and the second is from 1931–1933.