Wraps by car

Adler Standard 6 wrap

This page covers the Adler Standard 6 wrap across the three generations catalogued from 1927 to 1934. A full vinyl wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. Chrome or patterned film on that body requires about 67 ft (20.5 m).

3generations18 mof film for a full wrap

Adler Standard 6, third generation, factory photo
Adler Standard 6, third generation. Factory color shown.

Adler Standard 6 wrap colors and ideas

  • Standard 6 black wrap
  • Standard 6 white wrap
  • Standard 6 gray wrap
  • Standard 6 silver wrap
  • Standard 6 red wrap
  • Standard 6 blue wrap
  • Standard 6 green wrap
  • Standard 6 yellow wrap
  • Standard 6 orange wrap
  • Standard 6 purple wrap
  • Standard 6 pink wrap
  • Standard 6 teal wrap
  • Standard 6 brown wrap
  • Standard 6 gold wrap
  • Standard 6 chrome wrap
  • Standard 6 color shift wrap
  • Standard 6 carbon fiber wrap
  • Standard 6 camo and patterned wrap

How much vinyl to wrap an Adler Standard 6

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1933–1934sedan (4 doors)187.0 in (4,750 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)
1928–1934sedan (4 doors)168.1 in (4,270 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
1927–1930sedan (4 doors)168.1 in (4,270 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Standard 6 wrap cost factors

Standard 6 wrap cost depends on the size of the body, the amount of disassembly and the film you choose. The third generation is longer and uses more film than the earlier cars. The tall roof on the first and second generations requires a platform and more labor. Paint condition also matters because an older repaint may need more prep.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: sedan (4 doors).

Standard 6 wraps by generation

Swipe sideways. Tap a card for the full description.

Adler Standard 6, third generation, factory photo
Factory color shown

1933–1934 Standard 6 sedan (third generation)

1933–1934sedan (4 doors)187.0 in (4,750 mm)

The third generation Adler Standard 6 from 1933 to 1934 is the longest body in the catalog at 187.0 in (4,750 mm). Paint age is a key factor on a car of these years because panels may be original or repainted. A test spot on the paint before a full wrap shows how the film will adhere. This body takes about 59 ft (18 m) of cast film.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Adler Standard 6, second generation, factory photo
Factory color shown

1928–1934 Standard 6 sedan (second generation)

1928–1934sedan (4 doors)168.1 in (4,270 mm)

The second generation Adler Standard 6 was built from 1928 to 1934 and is 168.1 in (4,270 mm) long. Its production years overlap with the newer body from 1933 to 1934, so the owner of a car from those years checks which body it is. This body is tall at 71.9 in (1,825 mm), so the roof is wrapped from a platform. A full wrap takes about 54 ft (16.5 m) of film.

A tall body (71.9 in (1,825 mm)): the roof is wrapped from a platform.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Adler Standard 6, first generation, factory photo
Factory color shown

1927–1930 Standard 6 sedan (first generation)

1927–1930sedan (4 doors)168.1 in (4,270 mm)

The first generation Adler Standard 6 from 1927 to 1930 has the same 168.1 in (4,270 mm) length as the second generation. The height of the body at 71.9 in (1,825 mm) means the roof is wrapped from a platform and takes more time. This body also needs about 54 ft (16.5 m) of cast film for a full wrap.

A tall body (71.9 in (1,825 mm)): the roof is wrapped from a platform.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Standard 6

Partial wrap jobs on the Standard 6 include the roof, hood and mirror caps. Chrome delete can cover window trim and badges with black film. Paint protection film (PPF) is often applied as clear film on the front end. These smaller jobs use less material than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Adler Standard 6: body, cut-outs and film

The Adler Standard 6 vinyl wrap is shaped by the car's full-size sedan body and its lengths. All three generations are four-door sedans between 168.1 in (4,270 mm) and 187.0 in (4,750 mm) long. Extra material goes into the roof, doors and long lower panels. A taller body means the roof is wrapped from a platform.

Standard 6 wrap ideas begin with the parts that need cut-outs or removal. The tall body on two generations means the roof is wrapped from a platform. Door handles, badges and window trim are normally removed for a clean install. The long hood and four door gaps add time to the job.

How much vinyl to wrap a Standard 6 depends on the generation of the body. The first and second generations need about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. The third generation is longer at 187.0 in (4,750 mm) and takes about 59 ft (18 m). Chrome or patterned film adds about 12 ft (3.5 m) to each estimate.

Questions about wrapping an Adler Standard 6

How much vinyl does it take to wrap an Adler Standard 6?

About 59 ft (18 m) of 60-inch (1.52 m) cast film is needed to wrap an Adler Standard 6 of the newest generation. That figure comes from the film estimate for the third generation body from 1933 to 1934. The earlier generations take about 54 ft (16.5 m) of the same film.

Can I wrap only the hood or the roof of a Standard 6?

Yes, you can wrap only the hood or the roof of a Standard 6. The partial wrap options include the roof, hood and mirror caps. A chrome delete covers window trim and badges, while paint protection film (PPF) goes on the front end.

Is a Standard 6 hard to wrap?

The Standard 6 is not a simple wrap because of its size and tall roof. On the first and second generations, the roof is wrapped from a platform because the body is 71.9 in (1,825 mm) high. The long sedan body with four doors and a long hood also adds work.

How many generations of the Standard 6 does this page cover?

This page covers three generations of the Adler Standard 6. The first generation is from 1927 to 1930, the second from 1928 to 1934, and the third from 1933 to 1934.