Wraps by car

Adler Favorit wrap

This page covers the Adler Favorit wrap, a full vinyl wrap for the car built in two generations. The first generation ran from 1929 to 1933 and the second from 1933 to 1934. A full wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film.

2generations18 mof film for a full wrap

Adler Favorit, second generation, factory photo
Adler Favorit, second generation. Factory color shown.

Adler Favorit wrap colors and ideas

  • Favorit black wrap
  • Favorit white wrap
  • Favorit gray wrap
  • Favorit silver wrap
  • Favorit red wrap
  • Favorit blue wrap
  • Favorit green wrap
  • Favorit yellow wrap
  • Favorit orange wrap
  • Favorit purple wrap
  • Favorit pink wrap
  • Favorit teal wrap
  • Favorit brown wrap
  • Favorit gold wrap
  • Favorit chrome wrap
  • Favorit color shift wrap
  • Favorit carbon fiber wrap
  • Favorit camo and patterned wrap

How much vinyl to wrap an Adler Favorit

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1933–1934sedan (4 doors)187.0 in (4,750 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)
1929–1933sedan (4 doors)187.0 in (4,750 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Favorit wrap cost factors

Favorit wrap cost depends on the film type and the generation of the car. A cast film for a color change is the base amount, while chrome or patterned film adds square footage. The size of the car, 187.0 in (4,750 mm) long and 70.9 in (1,800 mm) tall, affects labor for the roof.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: sedan (4 doors).

Favorit wraps by generation

Swipe sideways. Tap a card for the full description.

Adler Favorit, second generation, factory photo
Factory color shown

1933–1934 Favorit sedan (second generation)

1933–1934sedan (4 doors)187.0 in (4,750 mm)

For the second generation Favorit (1933–1934), paint age matters before a wrap. These cars may have original or repainted panels, and a test spot on the paint checks adhesion. A clean, stable surface helps the film bond evenly across the sedan.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Adler Favorit, first generation, factory photo
Factory color shown

1929–1933 Favorit sedan (first generation)

1929–1933sedan (4 doors)187.0 in (4,750 mm)

The first generation Favorit (1929–1933) has a tall body, so the roof is wrapped from a platform. The 70.9 in (1,800 mm) height adds time and care to the roof install. Installers need a safe setup to reach the center of the roof without stretching the film too far.

A tall body (70.9 in (1,800 mm)): the roof is wrapped from a platform.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Favorit

A partial wrap on the Favorit can cover the roof, hood, or mirror caps. Favorit chrome delete covers window trim and badges with black film. Paint protection film (PPF) in clear film protects the front end from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Adler Favorit: body, cut-outs and film

The Adler Favorit vinyl wrap covers a four-door sedan body with a length of 187.0 in (4,750 mm). The single body style means the wrap area is the same for both generations. The tall body, 70.9 in (1,800 mm) high, adds film on the roof and pillars.

Favorit wrap ideas include working around door handles, trim, and badges on the sedan body. The roof needs a platform because of the tall body, so installers cut the film around the roof edges carefully. The doors and fenders have no cut-outs beyond the standard hardware.

To find how much vinyl to wrap a Favorit, start with about 59 ft (18 m) of 60-inch (1.52 m) cast film. The first generation (1929–1933) may need about 72 ft (22 m) for chrome or patterned film, while the second (1933–1934) needs about 67 ft (20.5 m). The length of the body is the same, so the difference comes from film type.

Questions about wrapping an Adler Favorit

How much vinyl does it take to wrap an Adler Favorit?

It takes about 59 ft (18 m) of 60-inch (1.52 m) cast film to wrap an Adler Favorit. This figure is for the newest body, the second generation from 1933 to 1934. Chrome or patterned film may need more, but the base cast film amount is 59 ft (18 m).

Can I wrap only the hood or the roof of a Favorit?

Yes, you can wrap only the hood or the roof of a Favorit. A partial wrap includes the roof, hood, or mirror caps as separate jobs. The roof is wrapped from a platform because of the tall body.

Is a Favorit hard to wrap?

A Favorit is not the easiest car to wrap because of its tall body. The 70.9 in (1,800 mm) height means the roof is wrapped from a platform. The large sedan body adds area, but the simple shape keeps the film work straightforward.

How many generations of the Favorit does this page cover?

This page covers two generations of the Favorit. The first generation ran from 1929 to 1933, and the second from 1933 to 1934. Both are four-door sedans with the same body length.