Wraps by car

Adler 2.5-litre wrap

The Adler 2.5-litre wrap covers every body style of this single 1937–1940 generation. A full vinyl wrap of the newest body takes about 54 ft (16.5 m) for the convertible and up to 59 ft (18 m) for the sedan. The estimate uses 60-inch (1.52 m) cast film, with chrome or patterned film raising the total to about 66 ft (20 m).

1generations16.5 mof film for a full wrap

Adler 2.5-litre, first generation, factory photo
Adler 2.5-litre, first generation. Factory color shown.

Adler 2.5-litre wrap colors and ideas

  • Adler 2.5-litre black wrap
  • Adler 2.5-litre white wrap
  • Adler 2.5-litre gray wrap
  • Adler 2.5-litre silver wrap
  • Adler 2.5-litre red wrap
  • Adler 2.5-litre blue wrap
  • Adler 2.5-litre green wrap
  • Adler 2.5-litre yellow wrap
  • Adler 2.5-litre orange wrap
  • Adler 2.5-litre purple wrap
  • Adler 2.5-litre pink wrap
  • Adler 2.5-litre teal wrap
  • Adler 2.5-litre brown wrap
  • Adler 2.5-litre gold wrap
  • Adler 2.5-litre chrome wrap
  • Adler 2.5-litre color shift wrap
  • Adler 2.5-litre carbon fiber wrap
  • Adler 2.5-litre camo and patterned wrap

How much vinyl to wrap an Adler 2.5-litre

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1937–1940convertible, sedan (2 or 4 doors)182.5 in (4,635 mm)about 54 ft (16.5 m) for the convertible to 59 ft (18 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)

Adler 2.5-litre wrap cost factors

Adler 2.5-litre wrap cost depends on film choice, body style, and the amount of trim work. The sedan uses about 59 ft (18 m) of 60-inch cast film, while the convertible uses about 54 ft (16.5 m). Chrome or patterned film can push the total to about 66 ft (20 m), and removing or masking hardware adds labor. The final figure also changes with the condition of the paint and how many panels need cut-outs.

  • Film for a full wrap: about 54 ft (16.5 m) for the convertible to 59 ft (18 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).
  • Body: convertible, sedan (2 or 4 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Adler 2.5-litre wraps by generation

Swipe sideways. Tap a card for the full description.

Adler 2.5-litre, first generation, factory photo
Factory color shown

1937–1940 Adler 2.5-litre convertible, sedan (first generation)

1937–1940convertible, sedan (2 or 4 doors)182.5 in (4,635 mm)

On the first generation Adler 2.5-litre, the open top is handled differently for fabric and folding hard tops. A fabric top is not wrapped, and the film ends where the top meets the body with a clean cut line. A folding hard top, when present, is wrapped as its own panels so the folds and hinges stay clear. This keeps the top mechanism working while the rest of the car gets a color change wrap.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 54 ft (16.5 m) for the convertible to 59 ft (18 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Roof, hood, chrome delete and PPF on an Adler 2.5-litre

A partial wrap on an Adler 2.5-litre can cover the roof, hood, or mirror caps without wrapping the whole car. Chrome delete is another option for this car, with black film over the window trim and badges. Paint protection film (PPF) is a clear film for the front end that preserves the paint underneath. These smaller jobs use less film and can be matched to the body color or a contrasting finish.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Adler 2.5-litre: body, cut-outs and film

Adler 2.5-litre vinyl wrap planning starts with the body style you have. The convertible is 182.5 in (4,635 mm) long and needs about 54 ft (16.5 m) of film, while the sedan takes up to 59 ft (18 m) because of its larger roof and rear panels. Two-door and four-door sedans fall close to the same figure, so the extra doors do not change the estimate much. A wrap shop measures each panel before cutting to reduce waste.

Adler 2.5-litre wrap ideas work best when you account for the trim and hardware. The fabric top on a convertible is not wrapped, and the film must end cleanly where the top meets the body. A folding hard top is treated as separate panels, so the seams do not interfere with the mechanism. Door handles, trim strips, and badges are removed or masked to wrap around them neatly.

How much vinyl to wrap an Adler 2.5-litre depends on which body you own. The sedan needs 59 ft (18 m) of 60-inch film, but the convertible needs only 54 ft (16.5 m). Because this model stayed in one generation, the figures do not change between years. A shop will still measure each car, since repairs or old paint can change the panel shapes.

Questions about wrapping an Adler 2.5-litre

How much vinyl does it take to wrap an Adler 2.5-litre?

It takes about 54 ft (16.5 m) to 59 ft (18 m) of 60-inch (1.52 m) cast film to wrap an Adler 2.5-litre, depending on the body style. The convertible is at the lower end, while the sedan needs the higher figure. These estimates are for a full vinyl wrap without a chrome delete or patterned film overlay.

Is the top of an Adler 2.5-litre wrapped?

No, the fabric top of an Adler 2.5-litre is not wrapped. The vinyl film ends where the fabric begins, and a folding hard top is wrapped as separate panels. This keeps the top mechanism working properly.

Which Adler 2.5-litre body takes more film?

The sedan takes more film than the convertible on an Adler 2.5-litre. The sedan needs about 59 ft (18 m) of 60-inch film, while the convertible needs about 54 ft (16.5 m). The sedan's larger roof and rear panels account for the difference.

Can I wrap only the hood or the roof of an Adler 2.5-litre?

Yes, you can wrap only the hood or the roof of an Adler 2.5-litre. A partial wrap can cover the roof, hood, or mirror caps, and chrome delete is available for the window trim and badges. Paint protection film (PPF) is also offered for the front end.