Wraps by car

Adler Primus wrap

The Adler Primus wrap page covers all three generations of the Adler Primus, produced from 1932 to 1938. A full vinyl wrap of the newest body, the 1937–1938 sedan, takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. The page explains how the different body styles affect film use, what to expect when wrapping each generation, and the options for partial wraps and chrome delete.

3generations15.5 mof film for a full wrap

Adler Primus, third generation, factory photo
Adler Primus, third generation. Factory color shown.

Adler Primus wrap colors and ideas

  • Primus black wrap
  • Primus white wrap
  • Primus gray wrap
  • Primus silver wrap
  • Primus red wrap
  • Primus blue wrap
  • Primus green wrap
  • Primus yellow wrap
  • Primus orange wrap
  • Primus purple wrap
  • Primus pink wrap
  • Primus teal wrap
  • Primus brown wrap
  • Primus gold wrap
  • Primus chrome wrap
  • Primus color shift wrap
  • Primus carbon fiber wrap
  • Primus camo and patterned wrap

How much vinyl to wrap an Adler Primus

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1937–1938sedan (2 doors)166.3 in (4,225 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)
1933–1936sedan (4 doors)157.5 in (4,000 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)
1932–1934sedan (4 doors)157.5 in (4,000 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Primus wrap cost factors

Primus wrap cost depends on the amount of film, the body style, and the condition of the paint. A full wrap of the 1937–1938 Primus uses about 51 ft (15.5 m) of film, while the earlier generations use about 49 ft (15 m). The number of panels, especially the long doors, affects the labor time. Paint age and any needed repairs also change the preparation work.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: sedan (2 doors).
  • Two long side doors: each door is one large piece of film.

Primus wraps by generation

Swipe sideways. Tap a card for the full description.

Adler Primus, third generation, factory photo
Factory color shown

1937–1938 Primus sedan (third generation)

1937–1938sedan (2 doors)166.3 in (4,225 mm)

The third generation Adler Primus, built from 1937 to 1938, is a two-door sedan with a length of 166.3 in (4,225 mm). Paint age on a car of these years may be original or repainted, and a test spot comes before a full wrap. Each of the two long side doors is wrapped as one large piece of film. This generation needs about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for a full wrap.

Two long side doors: each door is one large piece of film.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Adler Primus, second generation, factory photo
Factory color shown

1933–1936 Primus sedan (second generation)

1933–1936sedan (4 doors)157.5 in (4,000 mm)

The second generation Adler Primus, built from 1933 to 1936, is a four-door sedan with a length of 157.5 in (4,000 mm). This body style has more panels than the later two-door version. A full wrap takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. The shorter overall length and four-door layout mean slightly less film than the third generation.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Adler Primus, first generation, factory photo
Factory color shown

1932–1934 Primus sedan (first generation)

1932–1934sedan (4 doors)157.5 in (4,000 mm)

The first generation Adler Primus, built from 1932 to 1934, is a four-door sedan with a length of 157.5 in (4,000 mm). Its years overlap with the second generation from 1933 to 1934, so the owner of a car from those years checks which body it is. The first and second generations have the same size and body style, so the film estimate is the same: about 49 ft (15 m) of 60-inch (1.52 m) cast film. The main difference is the year range, which can affect film availability for older paints.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Primus

A partial wrap on an Adler Primus can cover the roof, hood, or mirror caps. A Primus chrome delete replaces window trim and badges with black film, giving the brightwork a different finish. Paint protection film (PPF) is a clear film applied to the front end to shield the paint from stone chips. These jobs use less film than a full wrap and can be done on any generation.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Adler Primus: body, cut-outs and film

An Adler Primus vinyl wrap must be planned around the car's body style and dimensions. The third generation sedan has two long doors, each requiring one large piece of film, while the earlier generations have four doors and a shorter overall length of 157.5 in (4,000 mm). The longer third generation at 166.3 in (4,225 mm) uses slightly more film for the main body. These differences mean the installer counts panels and cuts film to match each generation's specific body.

Primus wrap ideas begin with the parts that need cut-outs or come off the car. The two long side doors on the third generation are each wrapped as one large piece of film. Door handles, trim, and badges are removed or cut around carefully. For older generations, the four doors mean more door jambs to finish. A chrome delete covers window trim and badges with black film if the owner wants a different look.

How much vinyl to wrap a Primus changes between the three generations. The 1937–1938 body needs about 51 ft (15.5 m) of film, while the 1933–1936 and 1932–1934 bodies need about 49 ft (15 m). The difference comes from the third generation's longer body and larger doors. The film width remains the same at 60 inches (1.52 m) for all generations.

Questions about wrapping an Adler Primus

How much vinyl does it take to wrap an Adler Primus?

It takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film to wrap the newest Adler Primus body, the 1937–1938 two-door sedan. This estimate is for the main body panels. The earlier four-door generations use slightly less, about 49 ft (15 m).

Can I wrap only the hood or the roof of a Primus?

Yes, you can wrap only the hood or the roof of a Primus. A partial wrap can include the roof, hood, or mirror caps. These smaller jobs are done without wrapping the entire car.

Is a Primus hard to wrap?

A Primus is not especially hard to wrap, but the long doors on the third generation add work because each door is one large piece of film. The older generations have four doors, so there are more panel edges to finish. The car's age may also require careful paint preparation before wrapping.

How many generations of the Primus does this page cover?

This page covers three generations of the Adler Primus. They are the first generation (1932–1934), the second generation (1933–1936), and the third generation (1937–1938).