Wraps by car

Adler Trumpf Junior wrap

The Adler Trumpf Junior wrap page covers the first generation convertible built from 1934 to 1941. A full vinyl wrap of this body takes about 43 ft (13 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases the estimate to about 56 ft (17 m) because of the added trim. This page guides you through film amounts, body details, and wrap options for this pre-war car.

1generations13 mof film for a full wrap

Adler Trumpf Junior, first generation, factory photo
Adler Trumpf Junior, first generation. Factory color shown.

Adler Trumpf Junior wrap colors and ideas

  • Trumpf Junior black wrap
  • Trumpf Junior white wrap
  • Trumpf Junior gray wrap
  • Trumpf Junior silver wrap
  • Trumpf Junior red wrap
  • Trumpf Junior blue wrap
  • Trumpf Junior green wrap
  • Trumpf Junior yellow wrap
  • Trumpf Junior orange wrap
  • Trumpf Junior purple wrap
  • Trumpf Junior pink wrap
  • Trumpf Junior teal wrap
  • Trumpf Junior brown wrap
  • Trumpf Junior gold wrap
  • Trumpf Junior chrome wrap
  • Trumpf Junior color shift wrap
  • Trumpf Junior carbon fiber wrap
  • Trumpf Junior camo and patterned wrap

How much vinyl to wrap an Adler Trumpf Junior

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1934–1941convertible (2 doors)167.3 in (4,250 mm)about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Trumpf Junior wrap cost factors

Trumpf Junior wrap cost depends on the film chosen and the amount of chrome or pattern work. The base estimate of about 43 ft (13 m) of cast film grows to about 56 ft (17 m) when you include chrome or patterned film. A body length of 167.3 in (4,250 mm) and the convertible top influence the labor for cutting and finishing. The single body style keeps the cost factors simple.

  • Film for a full wrap: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Trumpf Junior wraps by generation

Swipe sideways. Tap a card for the full description.

Adler Trumpf Junior, first generation, factory photo
Factory color shown

1934–1941 Trumpf Junior convertible (first generation)

1934–1941convertible (2 doors)167.3 in (4,250 mm)

The first generation Adler Trumpf Junior has a fabric top that is not wrapped. The film ends where the top starts, at the beltline and the windshield header. A folding hard top, if present, would be wrapped as its own panel. The installer masks the top edge carefully to keep the film line straight.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Trumpf Junior

Partial wrap options for the Trumpf Junior include the hood, mirror caps, and rear deck. A chrome delete covers window trim and badges with black film for a different look. Paint protection film (PPF) on the front end gives clear protection without changing the color. These smaller jobs use less film than the full 43 ft (13 m) estimate.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Adler Trumpf Junior: body, cut-outs and film

The Adler Trumpf Junior vinyl wrap must account for a single body style, a two-door convertible. The body is 167.3 in (4,250 mm) long, a modest size for a wrap job. A compact body with simple lines uses the film estimate of about 43 ft (13 m). The lack of rear doors reduces the number of cut lines and makes the panels easier to cover.

Trumpf Junior wrap ideas begin with the convertible top, which is not wrapped. The film ends where the fabric top begins, so the installer works around the windshield frame and the top edge. Door handles, mirrors, and lights require cut-outs or removal for a clean finish. The hinged doors and hood can be wrapped separately without removing them from the car.

How much vinyl to wrap a Trumpf Junior stays the same across its catalog, because only one generation exists. The 1934–1941 run used the same basic body shell, so the full wrap estimate remains about 43 ft (13 m) of 60-inch film. Chrome or patterned film adds about 13 ft (4 m) to the total. The fabric top never takes film, so the amount does not change for that area.

Questions about wrapping an Adler Trumpf Junior

How much vinyl does it take to wrap an Adler Trumpf Junior?

A full wrap of an Adler Trumpf Junior takes about 43 ft (13 m) of 60-inch (1.52 m) cast film. That figure covers the painted body panels of the convertible. For chrome or patterned film, allow about 56 ft (17 m). The fabric top does not add to the film amount.

Is the top of a Trumpf Junior wrapped?

The top of an Adler Trumpf Junior is not wrapped. The fabric roof stays uncovered because film does not stick well to cloth. The film ends at the edge where the top begins. A folding hard top would be wrapped as its own panel.

Can I wrap only the hood or the roof of a Trumpf Junior?

Yes, you can wrap only the hood or the rear deck of a Trumpf Junior. The partial wrap job includes the hood and mirror caps, and the rear deck is an option for a smaller change. These areas are wrapped separately without needing the full 43 ft (13 m) of film. A partial wrap with a chrome delete is another way to change the look.

Is a Trumpf Junior hard to wrap?

The Trumpf Junior adds some work because of the convertible top and the small size. The fabric top must be masked carefully so the film ends cleanly where it starts. The body at 167.3 in (4,250 mm) is not hard to reach, but the curved panels of a 1930s design need stretching and heat. The straight sides and simple hood make the job easier than a modern car with many creases.