Wraps by car

BYD F0 wrap

The BYD F0 wrap page covers the single generation of this mini hatchback, produced from 2008 to 2015, and the vinyl wrap a full body takes. A complete wrap of the newest F0 body uses about 46 ft (14 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the estimate rises to about 54 ft (16.5 m). The page also explains partial wraps, chrome delete, and paint protection film for this car.

1generations14 mof film for a full wrap

BYD F0, first generation, factory photo
BYD F0, first generation. Factory color shown.

BYD F0 wrap colors and ideas

  • BYD F0 black wrap
  • BYD F0 white wrap
  • BYD F0 gray wrap
  • BYD F0 silver wrap
  • BYD F0 red wrap
  • BYD F0 blue wrap
  • BYD F0 green wrap
  • BYD F0 yellow wrap
  • BYD F0 orange wrap
  • BYD F0 purple wrap
  • BYD F0 pink wrap
  • BYD F0 teal wrap
  • BYD F0 brown wrap
  • BYD F0 gold wrap
  • BYD F0 chrome wrap
  • BYD F0 color shift wrap
  • BYD F0 carbon fiber wrap
  • BYD F0 camo and patterned wrap

How much vinyl to wrap a BYD F0

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2008–2015hatchback (5 doors)136.2 in (3,460 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

BYD F0 wrap cost factors

The BYD F0 wrap cost depends on the film type, the number of panels you wrap, and the condition of the paint on this 2008–2015 car. A full wrap with cast film uses about 46 ft (14 m) of 60-inch (1.52 m) material, while chrome or patterned film takes about 54 ft (16.5 m). The labor is affected by the tailgate glass, which needs a precise cut, and by any paint repairs before the wrap. A partial job on the hood or roof lowers the cost because less film and time are involved.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

BYD F0 wraps by generation

Swipe sideways. Tap a card for the full description.

BYD F0, first generation, factory photo
Factory color shown

2008–2015 BYD F0 hatchback (first generation)

2008–2015hatchback (5 doors)136.2 in (3,460 mm)

The first generation BYD F0, built from 2008 to 2015, is a mini five-door hatchback that may have original or repainted panels by now. On a car of these years, paint age varies, so a test spot comes before a full wrap. The installer checks adhesion on each panel, especially on the tailgate where the rear glass sits close to the film edge. If the paint is weak or peeling, it is corrected first to give the vinyl a sound base.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a BYD F0

A partial wrap on a BYD F0 can cover the roof, hood, or mirror caps to change the look without a full body wrap. For a chrome delete, the window trim and badges are covered with black film, which is a small job on this mini hatchback. Paint protection film (PPF) is another option: clear film applied to the front end of the car. These jobs use less material than a full wrap and focus on the areas that get the most attention or road wear.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a BYD F0: body, cut-outs and film

The BYD F0 vinyl wrap starts with a five-door hatchback body that is 136.2 in (3,460 mm) long, a compact shape that keeps film use moderate. The upright tailgate and short bonnet mean the main film panels are relatively small and easy to handle. The roof is a single large piece that requires care when laying film over its slight curvature. Overall, this mini body allows a straightforward wrap with fewer complex contours than a larger sedan.

BYD F0 wrap ideas often focus on the tailgate, where the rear glass is set into the panel and the film must end cleanly at the edge of the glass. For a full wrap, the door handles, mirror caps, and badges come off so the film can be tucked and cut precisely. The front and rear bumpers need relief cuts around the fog light openings and the license plate area. The fuel filler flap is usually wrapped separately and then reinstalled.

When you count how much vinyl to wrap a BYD F0, the first generation is the only body, so the figures stay the same from 2008 to 2015. A standard color change wrap uses about 46 ft (14 m) of 60-inch (1.52 m) cast film, while chrome or patterned film requires about 54 ft (16.5 m). Because the car is short at 136.2 in (3,460 mm), there is less waste than on a longer body. The wrap estimate includes the roof, all pillars, and the rocker panels.

Questions about wrapping a BYD F0

How much vinyl does it take to wrap a BYD F0?

A BYD F0 takes about 46 ft (14 m) of 60-inch (1.52 m) cast film for a full wrap. If you use chrome or patterned film, the amount goes up to about 54 ft (16.5 m). These figures are for the hatchback body of this car, which is 136.2 in (3,460 mm) long.

Can I wrap only the hood or the roof of a BYD F0?

Yes, you can wrap only the hood or the roof of a BYD F0. A partial wrap on the roof, hood, or mirror caps is a smaller job that uses less film and time than a full wrap. The hood and roof are flat enough to wrap with a single piece each.

Is a BYD F0 hard to wrap?

A BYD F0 is not hard to wrap, but the tailgate with the rear glass in it adds some work. The film must end exactly at the edge of the glass, which takes careful cutting and tucking. The short 136.2 in (3,460 mm) body means panels are small and manageable, so the overall job is straightforward for an installer.

How many generations of the BYD F0 does this page cover?

This page covers one generation of the BYD F0, produced from 2008 to 2015. It is the only generation in the catalog, so there are no earlier or later body styles to compare. The wrap information applies to that single hatchback body.