Wraps by car

BYD F3 wrap

The BYD F3 wrap page covers two generations of this compact sedan and hatchback. The newest body from 2012 to 2021 is 179.8 in (4,568 mm) long and takes about 56 ft (17 m) of 60-inch (1.52 m) cast film for a full vinyl wrap.

2generations17 mof film for a full wrap

BYD F3, second generation, factory photo
BYD F3, second generation. Factory color shown.

BYD F3 wrap colors and ideas

  • BYD F3 black wrap
  • BYD F3 white wrap
  • BYD F3 gray wrap
  • BYD F3 silver wrap
  • BYD F3 red wrap
  • BYD F3 blue wrap
  • BYD F3 green wrap
  • BYD F3 yellow wrap
  • BYD F3 orange wrap
  • BYD F3 purple wrap
  • BYD F3 pink wrap
  • BYD F3 teal wrap
  • BYD F3 brown wrap
  • BYD F3 gold wrap
  • BYD F3 chrome wrap
  • BYD F3 color shift wrap
  • BYD F3 carbon fiber wrap
  • BYD F3 camo and patterned wrap

How much vinyl to wrap a BYD F3

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–2021sedan (4 doors)179.8 in (4,568 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
2005–2014hatchback, sedan (4 or 5 doors)170.3 in (4,325 mm) to 178.5 in (4,533 mm)about 54 ft (16.5 m) for the hatchback to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m)

BYD F3 wrap cost factors

The BYD F3 wrap cost depends on the size of the car, the film chosen, and the amount of trim work. A full wrap of the newer sedan needs about 56 ft (17 m) of film, so larger sheets cost more than a partial job. The first generation with a hatchback is slightly smaller and needs about 54 ft (16.5 m) of film.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: sedan (4 doors).

BYD F3 wraps by generation

Swipe sideways. Tap a card for the full description.

BYD F3, second generation, factory photo
Factory color shown

2012–2021 BYD F3 sedan (second generation)

2012–2021sedan (4 doors)179.8 in (4,568 mm)

The second generation BYD F3 was produced from 2012 to 2021 as a four-door sedan. Paint age matters on a car of these years, because panels may be original or repainted. Before a full wrap, the film is tested on a spot to see how it adheres to the paint.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

BYD F3, first generation, factory photo
Factory color shown

2005–2014 BYD F3 hatchback, sedan (first generation)

2005–2014hatchback, sedan (4 or 5 doors)170.3 in (4,325 mm) to 178.5 in (4,533 mm)

The first generation BYD F3 was produced from 2005 to 2014 as a hatchback and a sedan. Its years overlap with the newer body from 2012 to 2014. The owner of a car from those years checks which body it is before ordering film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 54 ft (16.5 m) for the hatchback to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a BYD F3

For a partial wrap on a BYD F3, the roof, hood, and mirror caps can be covered with vinyl. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied as a clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a BYD F3: body, cut-outs and film

A BYD F3 vinyl wrap on the second generation covers a four-door sedan with a length of 179.8 in (4,568 mm). The first generation adds a hatchback and ranges from 170.3 in (4,325 mm) to 178.5 in (4,533 mm). These compact dimensions keep the wrap area manageable for one installer.

BYD F3 wrap ideas for the first generation include a tailgate with the rear glass in it, where the film ends at the edge of the glass. Some trims have a sunroof, so the roof film is cut around its opening. Every trim has fog lamps in the front bumper, and the bumper film needs cut-outs for them.

To work out how much vinyl to wrap a BYD F3, check which generation the car is. The newer sedan needs about 56 ft (17 m) of film, while the older hatchback needs about 54 ft (16.5 m) and the older sedan about 56 ft (17 m). For chrome or patterned film on the older body, allow up to about 64 ft (19.5 m).

Questions about wrapping a BYD F3

How much vinyl does it take to wrap a BYD F3?

A full wrap of a BYD F3 takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. This figure applies to the newest body, the second generation sedan from 2012 to 2021. The older hatchback needs about 54 ft (16.5 m) and the older sedan about 56 ft (17 m).

Can I wrap only the hood or the roof of a BYD F3?

Yes, you can wrap only the hood or the roof of a BYD F3. These are common partial wrap areas, along with the mirror caps. A chrome delete of the window trim and badges is another smaller job.

Is a BYD F3 hard to wrap?

The BYD F3 has a few details that add work to a wrap. On the first generation, a tailgate with glass in it means the film ends at the edge of the glass, some trims have a sunroof that needs cutting around, and every trim has fog lamps that need cut-outs in the bumper film.

How many generations of the BYD F3 does this page cover?

This page covers two generations of the BYD F3. The first generation was produced from 2005 to 2014, and the second generation from 2012 to 2021. The two generations overlap from 2012 to 2014.