Wraps by car

BYD F6 wrap

The BYD F6 wrap page covers the single generation of this mid-size sedan built from 2007 to 2012. A full vinyl wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases the needed amount to about 69 ft (21 m).

1generations18 mof film for a full wrap

BYD F6, first generation, factory photo
BYD F6, first generation. Factory color shown.

BYD F6 wrap colors and ideas

  • BYD F6 black wrap
  • BYD F6 white wrap
  • BYD F6 gray wrap
  • BYD F6 silver wrap
  • BYD F6 red wrap
  • BYD F6 blue wrap
  • BYD F6 green wrap
  • BYD F6 yellow wrap
  • BYD F6 orange wrap
  • BYD F6 purple wrap
  • BYD F6 pink wrap
  • BYD F6 teal wrap
  • BYD F6 brown wrap
  • BYD F6 gold wrap
  • BYD F6 chrome wrap
  • BYD F6 color shift wrap
  • BYD F6 carbon fiber wrap
  • BYD F6 camo and patterned wrap

How much vinyl to wrap a BYD F6

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2007–2012sedan (4 doors)190.7 in (4,845 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

BYD F6 wrap cost factors

The BYD F6 wrap cost depends on the film area, the film type and the condition of the paint. A full wrap uses about 59 ft (18 m) of 60-inch (1.52 m) cast film, and chrome or patterned film needs about 69 ft (21 m). The cost changes with the number of cut-outs, removed parts and paint repairs before the film goes on.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: sedan (4 doors).

BYD F6 wraps by generation

Swipe sideways. Tap a card for the full description.

BYD F6, first generation, factory photo
Factory color shown

2007–2012 BYD F6 sedan (first generation)

2007–2012sedan (4 doors)190.7 in (4,845 mm)

The first generation of the BYD F6 was made from 2007 to 2012. The paint on a car of these years may be original or repainted on some panels. A test spot on a small area comes before a full wrap, because old or repainted paint can react differently to film adhesive.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a BYD F6

A partial wrap on the BYD F6 includes the roof, hood or mirror caps without covering the whole car. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a BYD F6: body, cut-outs and film

The BYD F6 vinyl wrap is shaped by the one body style offered: a four-door sedan. A single sedan body means less variation in panel sizes compared with cars sold in multiple shapes. The body is 190.7 in (4,845 mm) long, and wrapping the full exterior covers the roof, hood, trunk and all four doors. A standard hood, roof and trunk are easier to wrap than a vehicle with a long roof or many separate panels.

Useful BYD F6 wrap ideas focus on the areas that need extra attention. The door handles, mirrors, antenna base and badges are removed or wrapped separately for a clean edge. The grille and bumper openings call for cut-outs, and the window trim can be wrapped as part of a chrome delete (bright trim covered with black film).

The question of how much vinyl to wrap a BYD F6 has one answer because the page covers one generation. The 2007–2012 sedan uses the same body from first year to last. The film estimate of about 59 ft (18 m) of 60-inch (1.52 m) cast film applies to a full color change wrap on any car of this generation.

Questions about wrapping a BYD F6

How much vinyl does it take to wrap a BYD F6?

A BYD F6 takes about 59 ft (18 m) of 60-inch (1.52 m) cast film for a full wrap. If the wrap uses chrome or patterned film, the amount rises to about 69 ft (21 m). These figures cover the full exterior of the sedan body.

Can I wrap only the hood or the roof of a BYD F6?

Yes, the hood or the roof of a BYD F6 can be wrapped as a partial wrap. A partial wrap also includes mirror caps, and a chrome delete covers the window trim and badges. Clear paint protection film on the front end is another partial option.

Is a BYD F6 hard to wrap?

The BYD F6 is not hard to wrap, but the door handles, mirrors, antenna base and badges add work. The grille and bumper openings need cut-outs, and the window trim takes extra time if you include a chrome delete. The body is a single sedan shape, which keeps the panel count low.

How many generations of the BYD F6 does this page cover?

The page covers one generation of the BYD F6. The single generation ran from 2007 to 2012 and was offered only as a four-door sedan.