Wraps by car

BYD F8 (S8) wrap

The BYD F8 (S8) wrap page covers the first generation convertible produced from 2009 to 2010. This compact two-door has a length of 177.0 in (4,495 mm). A full wrap of this body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast vinyl wrap.

1generations14.5 mof film for a full wrap

BYD F8 (S8), first generation, factory photo
BYD F8 (S8), first generation. Factory color shown.

BYD F8 (S8) wrap colors and ideas

  • F8 (S8) black wrap
  • F8 (S8) white wrap
  • F8 (S8) gray wrap
  • F8 (S8) silver wrap
  • F8 (S8) red wrap
  • F8 (S8) blue wrap
  • F8 (S8) green wrap
  • F8 (S8) yellow wrap
  • F8 (S8) orange wrap
  • F8 (S8) purple wrap
  • F8 (S8) pink wrap
  • F8 (S8) teal wrap
  • F8 (S8) brown wrap
  • F8 (S8) gold wrap
  • F8 (S8) chrome wrap
  • F8 (S8) color shift wrap
  • F8 (S8) carbon fiber wrap
  • F8 (S8) camo and patterned wrap

How much vinyl to wrap a BYD F8 (S8)

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2009–2010convertible (2 doors)177.0 in (4,495 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

F8 (S8) wrap cost factors

F8 (S8) wrap cost depends on the film choice, the top type, and the labor for a compact convertible. The body uses about 48 ft (14.5 m) of 60-inch (1.52 m) cast film, or about 54 ft (16.5 m) for chrome or patterned film. The convertible top adds time for masking and precise edges. Removing parts like mirror caps before wrapping also affects the final cost.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

F8 (S8) wraps by generation

Swipe sideways. Tap a card for the full description.

BYD F8 (S8), first generation, factory photo
Factory color shown

2009–2010 F8 (S8) convertible (first generation)

2009–2010convertible (2 doors)177.0 in (4,495 mm)

The BYD F8 (S8) open top defines how the wrap is planned for this generation. A fabric top is not wrapped and the film ends where it begins. On a folding hard top, each panel is wrapped as a separate piece. This keeps the top functional and the wrap neat.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on an F8 (S8)

The F8 (S8) chrome delete covers window trim and badges with black film. A partial wrap on this car can be the hood, mirror caps, or rear deck. Paint protection film (PPF) is an option for the front end as a clear film. These smaller jobs protect or change the look without a full wrap.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a BYD F8 (S8): body, cut-outs and film

The BYD F8 (S8) vinyl wrap fits a compact convertible with two doors. Its 177.0 in (4,495 mm) length keeps material needs moderate for a full color change wrap. The convertible body means the film work focuses on the lower body and panels. Proper planning around the top is part of a clean installation.

F8 (S8) wrap ideas start with the two-door body and the top area. The fabric top is not wrapped and the film ends where it begins. A folding hard top is wrapped as panels of its own if the car has that style. These cut-outs and panel splits shape the wrap design.

How much vinyl to wrap an F8 (S8) depends on the single generation offered from 2009 to 2010. The convertible body is the only style, so the estimate is about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the figure to about 54 ft (16.5 m). This gives a clear base for planning the material purchase.

Questions about wrapping a BYD F8 (S8)

How much vinyl does it take to wrap a BYD F8 (S8)?

About 48 ft (14.5 m) of 60-inch (1.52 m) cast film is needed to wrap a BYD F8 (S8). The estimate is based on the first generation convertible body from 2009 to 2010. If you use chrome or patterned film, plan for about 54 ft (16.5 m).

Is the top of an F8 (S8) wrapped?

No, the fabric top of an F8 (S8) is not wrapped. The film ends where the fabric begins. If the car has a folding hard top, those panels are wrapped as separate pieces.

Can I wrap only the hood or the roof of an F8 (S8)?

Yes, you can wrap only the hood or the roof panel of an F8 (S8). A partial wrap often includes the hood, mirror caps, or rear deck. This is a way to change the look without a full wrap.

Is an F8 (S8) hard to wrap?

An F8 (S8) is moderately hard to wrap because of its convertible top. The fabric or folding top requires careful masking and panel separation. At 177.0 in (4,495 mm) long, the body is compact but the top adds labor.