Wraps by car

BYD Flyer wrap

This page covers the BYD Flyer wrap, including vinyl wrap coverage amounts and installation notes. The Flyer has one generation in this catalog, produced from 2005 to 2008. A full wrap of the newest body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film.

1generations14 mof film for a full wrap

BYD Flyer, first generation, factory photo
BYD Flyer, first generation. Factory color shown.

BYD Flyer wrap colors and ideas

  • Flyer black wrap
  • Flyer white wrap
  • Flyer gray wrap
  • Flyer silver wrap
  • Flyer red wrap
  • Flyer blue wrap
  • Flyer green wrap
  • Flyer yellow wrap
  • Flyer orange wrap
  • Flyer purple wrap
  • Flyer pink wrap
  • Flyer teal wrap
  • Flyer brown wrap
  • Flyer gold wrap
  • Flyer chrome wrap
  • Flyer color shift wrap
  • Flyer carbon fiber wrap
  • Flyer camo and patterned wrap

How much vinyl to wrap a BYD Flyer

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2005–2008hatchback (5 doors)141.9 in (3,605 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Flyer wrap cost factors

The Flyer wrap cost depends on the amount of film and the labor hours. A full wrap uses about 46 ft (14 m) of 60-inch (1.52 m) film, and chrome or patterned film needs about 54 ft (16.5 m). The size and the need for bumper cut-outs also add labor time.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Flyer wraps by generation

Swipe sideways. Tap a card for the full description.

BYD Flyer, first generation, factory photo
Factory color shown

2005–2008 Flyer hatchback (first generation)

2005–2008hatchback (5 doors)141.9 in (3,605 mm)

The first generation BYD Flyer was produced from 2005 to 2008. Paint age on a car of these years means panels may be original or repainted, so a test spot comes before a full wrap. That check shows whether the film will bond properly to the old paint.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Flyer

For a partial wrap on a BYD Flyer, you can cover the roof, hood, or mirror caps. Flyer chrome delete covers window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a BYD Flyer: body, cut-outs and film

The BYD Flyer vinyl wrap is a straightforward job because the car is a mini hatchback with five doors. Its compact dimensions mean fewer panels and a smaller surface area than wrapping a larger car. The only body style is a practical five-door hatchback.

Flyer wrap ideas should account for the tailgate, which includes the rear glass, so the film ends at the edge of the glass. Every trim has fog lamps in the front bumper, so the installer must cut out those openings in the bumper film. Those cut-outs require care to keep the film smooth around the lights.

When figuring out how much vinyl to wrap a Flyer, the amount stays the same for this single generation. The car was sold from 2005 to 2008 without major body changes that affect film coverage. You can plan on the same material estimate for any Flyer from these years.

Questions about wrapping a BYD Flyer

How much vinyl does it take to wrap a BYD Flyer?

It takes about 46 ft (14 m) of 60-inch (1.52 m) cast film to wrap a BYD Flyer. Chrome or patterned film would be about 54 ft (16.5 m).

Can I wrap only the hood or the roof of a Flyer?

Yes, you can wrap only the hood or the roof of a Flyer. A partial wrap can be limited to the roof, hood, and mirror caps.

Is a Flyer hard to wrap?

A Flyer is not especially hard to wrap, but its size adds some work. The rear tailgate includes the glass, so the film must be trimmed at the glass edge. Fog lamps in the front bumper require cut-outs in the film.

How many generations of the Flyer does this page cover?

This page covers one generation of the Flyer, from 2005 to 2008.