Wraps by car

BYD G6 wrap

This page covers the BYD G6, a mid-size sedan built from 2011 to 2013. It is the only generation, so all notes apply to one body. A full vinyl wrap of this car takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 69 ft (21 m).

1generations18 mof film for a full wrap

BYD G6, first generation, factory photo
BYD G6, first generation. Factory color shown.

BYD G6 wrap colors and ideas

  • BYD G6 black wrap
  • BYD G6 white wrap
  • BYD G6 gray wrap
  • BYD G6 silver wrap
  • BYD G6 red wrap
  • BYD G6 blue wrap
  • BYD G6 green wrap
  • BYD G6 yellow wrap
  • BYD G6 orange wrap
  • BYD G6 purple wrap
  • BYD G6 pink wrap
  • BYD G6 teal wrap
  • BYD G6 brown wrap
  • BYD G6 gold wrap
  • BYD G6 chrome wrap
  • BYD G6 color shift wrap
  • BYD G6 carbon fiber wrap
  • BYD G6 camo and patterned wrap

How much vinyl to wrap a BYD G6

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2011–2013sedan (4 doors)191.3 in (4,860 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

BYD G6 wrap cost factors

The BYD G6 wrap cost depends on the size of the car and the film you choose. A full wrap uses about 59 ft (18 m) of 60-inch (1.52 m) film. Paint protection film on the front end uses less film but more labor. The condition of the paint also changes the prep work.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: sedan (4 doors).

BYD G6 wraps by generation

Swipe sideways. Tap a card for the full description.

BYD G6, first generation, factory photo
Factory color shown

2011–2013 BYD G6 sedan (first generation)

2011–2013sedan (4 doors)191.3 in (4,860 mm)

The first generation BYD G6 is the only generation in this catalog. These cars are from 2011 to 2013, so the paint may be original or repainted. A test spot on each panel shows if the film will stick well. Wrap the car only after the paint is clean and smooth.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a BYD G6

A partial wrap on the BYD G6 includes the roof, hood or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film that goes on the front end. These jobs use less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a BYD G6: body, cut-outs and film

The BYD G6 vinyl wrap covers one sedan body with four doors. Its length of 191.3 in (4,860 mm) makes it a straightforward mid-size car. The wrap has no long roof rails or hatch to add film. A single installer can handle each panel in a normal shift.

BYD G6 wrap ideas start with the door handles and badges, which need cut-outs. The mirrors come off for a cleaner edge around the caps. The front and rear bumpers take extra time because of their shape. The trim around the windows can be wrapped in black for a chrome delete.

If you want to know how much vinyl to wrap a BYD G6, measure the sedan body. The car came as one generation, so the size does not change. The film estimate of about 59 ft (18 m) fits every year from 2011 to 2013. Buy a little more for mistakes on the bumpers.

Questions about wrapping a BYD G6

How much vinyl does it take to wrap a BYD G6?

A BYD G6 takes about 59 ft (18 m) of 60-inch (1.52 m) vinyl for a full wrap. If you choose chrome or patterned film, the amount goes up to about 69 ft (21 m). These figures assume a skilled installer with normal waste. Measure your car before you order.

Can I wrap only the hood or the roof of a BYD G6?

Yes, you can wrap only the hood or the roof of a BYD G6. A partial wrap is also common for mirror caps. A chrome delete on the window trim and badges is another small job. Clear paint protection film on the front end protects without changing the color.

Is a BYD G6 hard to wrap?

A BYD G6 is not a hard car to wrap, but some parts add work. The front and rear bumpers have curves that need heat and stretching. The door handles and badges must be cut out or removed. Its mid-size body means more film than a compact but fewer hours than an SUV.

How many generations of the BYD G6 does this page cover?

This page covers one generation of the BYD G6. It was produced from 2011 to 2013 as a mid-size sedan. There were no major body changes in those years. All the film estimates apply to that single generation.