Wraps by car

Daihatsu Copen wrap

A Daihatsu Copen wrap covers the two generations of this mini convertible with a full vinyl wrap. The newest body, built from 2014 onward, takes about 36 ft (11 m) of 60-inch (1.52 m) cast film. The first generation, produced from 2002 to 2012, needs about 33 ft (10 m) of the same film.

2generations11 mof film for a full wrap

Daihatsu Copen, second generation, factory photo
Daihatsu Copen, second generation. Factory color shown.

Daihatsu Copen wrap colors and ideas

  • Copen black wrap
  • Copen white wrap
  • Copen gray wrap
  • Copen silver wrap
  • Copen red wrap
  • Copen blue wrap
  • Copen green wrap
  • Copen yellow wrap
  • Copen orange wrap
  • Copen purple wrap
  • Copen pink wrap
  • Copen teal wrap
  • Copen brown wrap
  • Copen gold wrap
  • Copen chrome wrap
  • Copen color shift wrap
  • Copen carbon fiber wrap
  • Copen camo and patterned wrap

How much vinyl to wrap a Daihatsu Copen

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–nowconvertible (2 doors)133.7 in (3,395 mm)about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m)
2002–2012convertible (2 doors)133.7 in (3,395 mm)about 33 ft (10 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m)

Copen wrap cost factors

Copen wrap cost depends on the amount of film and the work needed on a mini convertible. The second generation needs about 36 ft (11 m) of cast film, while the first generation needs about 33 ft (10 m). Chrome and patterned films add about 5 ft (1.5 m) to the total. The small size of this car keeps the panel count low, but the convertible top adds finishing time.

  • Film for a full wrap: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Copen wraps by generation

Swipe sideways. Tap a card for the full description.

Daihatsu Copen, second generation, factory photo
Factory color shown

2014–now Copen convertible (second generation)

2014–nowconvertible (2 doors)133.7 in (3,395 mm)

The open top of the Daihatsu Copen is not covered with wrap film. On models with a fabric roof, the film ends where the roof begins and the fabric stays untouched. On a folding hardtop, the hard panels are wrapped as separate pieces. This keeps the roof mechanism free and the wrap lines clean.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m).

Daihatsu Copen, first generation, factory photo
Factory color shown

2002–2012 Copen convertible (first generation)

2002–2012convertible (2 doors)133.7 in (3,395 mm)

Paint age on the first-generation Daihatsu Copen, sold from 2002 to 2012, matters before a wrap. Panels on a car this old may be original or repainted, and fresh paint can lift when film is removed. A test spot on each panel shows whether the paint will hold the vinyl. This step is important on a convertible that has spent years in the sun.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 33 ft (10 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m).

Roof, hood, chrome delete and PPF on a Copen

A partial wrap on a Daihatsu Copen covers the hood, mirror caps, or rear deck without wrapping the whole car. A chrome delete (bright trim covered with black film) works on the window trim and badges. Paint protection film (PPF) can be applied as a clear film on the front end to guard against stone chips. These smaller jobs use less film and suit the Copen's compact shape.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Daihatsu Copen: body, cut-outs and film

The Daihatsu Copen vinyl wrap works on a two-door convertible that measures 133.7 in (3,395 mm) in length. This compact size keeps film use low and makes panel coverage straightforward. The open top means the wrap stops at the roof opening, so no film is used on a fabric top. Both generations share the same body length, which simplifies planning.

Copen wrap ideas start with the folding hardtop panels on this car. When the top is down, the wrapped panels are still visible, so the film must be cut and finished as separate pieces. The fabric roof on other versions is not wrapped, and the wrap ends neatly where the roof begins. Mirrors, door handles, and badges are removed or cut around for a clean look.

If you want to know how much vinyl to wrap a Copen, check which generation you have. The second generation, from 2014, uses about 37 ft (11 m) of 60-inch film for a full wrap. The first generation, from 2002 to 2012, uses about 33 ft (10 m). Chrome or patterned film requires about 41 ft (12.5 m) on either body.

Questions about wrapping a Daihatsu Copen

How much vinyl does it take to wrap a Daihatsu Copen?

A Daihatsu Copen needs about 36 ft (11 m) of 60-inch (1.52 m) cast film for a full wrap on the newest body. That is the figure for the second generation, sold from 2014 onward. The first generation, from 2002 to 2012, takes about 33 ft (10 m) of the same film.

Is the top of a Copen wrapped?

No, the top of a Copen is not wrapped when it is a fabric roof. The film ends where the roof begins and the fabric stays uncovered. On a folding hardtop, the rigid panels are wrapped as separate pieces.

Can I wrap only the hood or the roof of a Copen?

Yes, you can wrap only the hood, mirror caps, or rear deck of a Copen. A partial wrap on this car works well for those areas. A chrome delete (bright trim covered with black film) is also possible on the window trim and badges. Clear paint protection film (PPF) can cover the front end of the Copen.

Is a Copen hard to wrap?

The Daihatsu Copen is not hard to wrap because it is a small convertible that measures 133.7 in (3,395 mm) long. The open top adds work because the film ends at the roof opening and a folding hardtop is wrapped as separate panels. Its compact size keeps the panel count low, but the roof area takes extra care.