Wraps by car

Daihatsu Terios wrap

The Daihatsu Terios wrap page covers two generations of this compact SUV, from 1997 to the present. A full vinyl wrap of the newest body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. The first generation is shorter and needs about 51 ft (15.5 m) of the same film.

2generations17 mof film for a full wrap

Daihatsu Terios, second generation, factory photo
Daihatsu Terios, second generation. Factory color shown.

Daihatsu Terios wrap colors and ideas

  • Terios black wrap
  • Terios white wrap
  • Terios gray wrap
  • Terios silver wrap
  • Terios red wrap
  • Terios blue wrap
  • Terios green wrap
  • Terios yellow wrap
  • Terios orange wrap
  • Terios purple wrap
  • Terios pink wrap
  • Terios teal wrap
  • Terios brown wrap
  • Terios gold wrap
  • Terios chrome wrap
  • Terios color shift wrap
  • Terios carbon fiber wrap
  • Terios camo and patterned wrap

How much vinyl to wrap a Daihatsu Terios

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–nowSUV (5 doors)159.6 in (4,055 mm) to 161.2 in (4,095 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)
1997–2005SUV (5 doors)151.4 in (3,845 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Terios wrap cost factors

Terios wrap cost depends on the film area, the film type, and the labor for trim and sensors. The second generation needs about 56 ft (17 m) of film, while the first needs about 51 ft (15.5 m). Roof rails, parking sensors, and the rear spoiler add time to the installation. A partial wrap or paint protection film uses less material and lowers the cost.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has a rear spoiler: it is wrapped as a piece of its own.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Restyled in 2009: bumpers and lights differ between the versions, and so do the film cuts.

Terios wraps by generation

Swipe sideways. Tap a card for the full description.

Daihatsu Terios, second generation, factory photo
Factory color shown

2006–now Terios SUV (second generation)

2006–nowSUV (5 doors)159.6 in (4,055 mm) to 161.2 in (4,095 mm)

The second generation Daihatsu Terios was restyled in 2009 with new bumpers and lights. Film cut for the pre-2009 version does not fit the post-2009 version, and the other way around. A wrapper checks the production year before cutting panels for this body. The change affects only the front and rear ends, not the doors or roof.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has a rear spoiler: it is wrapped as a piece of its own.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Daihatsu Terios, first generation, factory photo
Factory color shown

1997–2005 Terios SUV (first generation)

1997–2005SUV (5 doors)151.4 in (3,845 mm)

The first generation Daihatsu Terios runs from 1997 to 2005, and paint age decides how the wrap is prepared. Panels may be original or repainted, so a test spot comes before a full wrap. A small piece of film is applied to check adhesion on the old paint. If the paint lifts, the surface needs correction before the full job.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Terios

A partial wrap on a Terios covers the roof, hood, mirror caps, or rear spoiler. Terios chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These jobs use less film than a full wrap and can be done in stages.

  • Partial wrap: roof, hood, mirror caps, rear spoiler.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Daihatsu Terios: body, cut-outs and film

The Daihatsu Terios vinyl wrap is shaped by its five-door SUV body and compact footprint. The second generation measures 159.6 in (4,055 mm) to 161.2 in (4,095 mm) long, which calls for about 56 ft (17 m) of film. The first generation is smaller at 151.4 in (3,845 mm) and needs about 51 ft (15.5 m). Its straight panels and few deep recesses keep the film estimate predictable.

Terios wrap ideas start with the parts that need cut-outs or removal. Every trim has roof rails that come off before the roof is wrapped, or the film is cut along them. A tailgate with the rear glass in it means the film ends at the edge of the glass. The rear spoiler is wrapped as a piece of its own, and some trims have parking sensors that require cutting around each sensor.

How much vinyl to wrap a Terios depends on the generation you own. The second generation (2006–now) needs about 56 ft (17 m) of cast film, and a restyling in 2009 changed bumpers and lights so film cut for one version does not fit the other. The first generation (1997–2005) needs about 51 ft (15.5 m). Chrome or patterned film adds roughly 10 percent to either estimate.

Questions about wrapping a Daihatsu Terios

How much vinyl does it take to wrap a Daihatsu Terios?

A full wrap of a Daihatsu Terios takes about 56 ft (17 m) of 60-inch (1.52 m) cast film for the newest body. That figure covers the second generation from 2006 onward. The first generation needs about 51 ft (15.5 m) of the same film.

Which years of the Terios take the same film cuts?

The same film cuts fit 2006 to 2009 Terios models, and 2009 to now models as another set. The restyling in 2009 changed the bumpers and lights. Film cut for one version does not fit the other. The first generation (1997–2005) has its own cuts.

Can I wrap only the hood or the roof of a Terios?

Yes, a Terios can have only the hood or the roof wrapped. A partial wrap often covers the roof, hood, mirror caps, or rear spoiler. It is a smaller job than a full wrap and uses less film. Chrome delete and paint protection film are other partial options.

Is a Terios hard to wrap?

A Terios is not the hardest SUV to wrap, but a few parts add work. The roof rails on every trim must come off or be cut around. A tailgate with the rear glass in it requires careful edge work. Some trims have parking sensors that need cut-outs in the film.