Wraps by car

Daihatsu Mira e:S wrap

This page covers the Daihatsu Mira e:S vinyl wrap across two generations. The newest body is the second generation, produced from 2017 onward. A full wrap of that body takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. The first generation ran from 2011 to 2017 with the same body length.

2generations13.5 mof film for a full wrap

Daihatsu Mira e:S, second generation, factory photo
Daihatsu Mira e:S, second generation. Factory color shown.

Daihatsu Mira e:S wrap colors and ideas

  • Mira e:S black wrap
  • Mira e:S white wrap
  • Mira e:S gray wrap
  • Mira e:S silver wrap
  • Mira e:S red wrap
  • Mira e:S blue wrap
  • Mira e:S green wrap
  • Mira e:S yellow wrap
  • Mira e:S orange wrap
  • Mira e:S purple wrap
  • Mira e:S pink wrap
  • Mira e:S teal wrap
  • Mira e:S brown wrap
  • Mira e:S gold wrap
  • Mira e:S chrome wrap
  • Mira e:S color shift wrap
  • Mira e:S carbon fiber wrap
  • Mira e:S camo and patterned wrap

How much vinyl to wrap a Daihatsu Mira e:S

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2017–nowhatchback (5 doors)133.7 in (3,395 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)
2011–2017hatchback (5 doors)133.7 in (3,395 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

Mira e:S wrap cost factors

Mira e:S wrap cost depends on the film type and the size of the job. A full wrap uses about 44 ft (13.5 m) of 60-inch cast film, while chrome or patterned film needs about 52 ft (16 m). The car has five doors and a tailgate with glass, so more panels mean more cutting and finishing time. Partial jobs like the hood or roof use less film, so the cost is lower.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Mira e:S wraps by generation

Swipe sideways. Tap a card for the full description.

Daihatsu Mira e:S, second generation, factory photo
Factory color shown

2017–now Mira e:S hatchback (second generation)

2017–nowhatchback (5 doors)133.7 in (3,395 mm)

The second generation of the Daihatsu Mira e:S is a five-door hatchback built from 2017 onward. It is 133.7 in (3,395 mm) long, so a full wrap uses about 44 ft (13.5 m) of 60-inch cast film. The tailgate includes the rear glass, and the film ends at the glass edge. The small size keeps the panel count low for a color change wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Daihatsu Mira e:S, first generation, factory photo
Factory color shown

2011–2017 Mira e:S hatchback (first generation)

2011–2017hatchback (5 doors)133.7 in (3,395 mm)

The first generation of the Daihatsu Mira e:S was produced from 2011 to 2017 with a restyle in 2013. On a car of these years, some panels may be original paint while others are repainted. A test spot on the paint comes before a full wrap to check adhesion. The dimensions stayed at 133.7 in (3,395 mm), so film needs are the same as the newer car.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a Mira e:S

A partial wrap on the Mira e:S can cover the roof, hood, or mirror caps. Mira e:S chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap and focus on high-impact areas.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Daihatsu Mira e:S: body, cut-outs and film

The Daihatsu Mira e:S vinyl wrap is a straightforward job on a five-door hatchback. The car is compact at 133.7 in (3,395 mm) long, so a full wrap uses about 44 ft (13.5 m) of 60-inch film. The simple body shape has no deep recesses or complex curves. The five doors mean each door panel is separate, adding seams but keeping installs manageable.

Mira e:S wrap ideas often start with the tailgate, since the rear glass sits in it. The film ends at the edge of the glass, so the glass area does not need film. The side mirrors are small and wrap quickly. The door handles and badges come off for a clean edge, and the front and rear bumpers can be wrapped on the car.

How much vinyl to wrap a Mira e:S depends on the generation and film type. Both generations are 133.7 in (3,395 mm) long, so the base amount is about 44 ft (13.5 m) of 60-inch cast film. Chrome or patterned film needs extra for pattern matching, about 52 ft (16 m). The first generation got a restyle in 2013 but kept the same dimensions.

Questions about wrapping a Daihatsu Mira e:S

How much vinyl does it take to wrap a Daihatsu Mira e:S?

It takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film to wrap a Daihatsu Mira e:S. The newest body, from 2017 onward, uses this amount for a full color change wrap. Chrome or patterned film requires about 52 ft (16 m) because of pattern matching.

Can I wrap only the hood or the roof of a Mira e:S?

Yes, you can wrap only the hood or the roof of a Mira e:S. A partial wrap can also cover the mirror caps. These jobs are smaller than a full wrap and use less film.

Is a Mira e:S hard to wrap?

A Mira e:S is not hard to wrap, but the tailgate adds work. The rear glass is in the tailgate, so the film ends at the edge of the glass. The small size of 133.7 in (3,395 mm) keeps the job manageable.

How many generations of the Mira e:S does this page cover?

This page covers two generations of the Mira e:S. The first generation is from 2011 to 2017. The second generation is from 2017 onward.