Wraps by car

Daihatsu Mebius wrap

The Daihatsu Mebius wrap covers this five-door minivan, built since 2013 in one generation. A vinyl wrap changes its color or finish without a respray. The newest body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 72 ft (22 m).

1generations19 mof film for a full wrap

Daihatsu Mebius, first generation, factory photo
Daihatsu Mebius, first generation. Factory color shown.

Daihatsu Mebius wrap colors and ideas

  • Mebius black wrap
  • Mebius white wrap
  • Mebius gray wrap
  • Mebius silver wrap
  • Mebius red wrap
  • Mebius blue wrap
  • Mebius green wrap
  • Mebius yellow wrap
  • Mebius orange wrap
  • Mebius purple wrap
  • Mebius pink wrap
  • Mebius teal wrap
  • Mebius brown wrap
  • Mebius gold wrap
  • Mebius chrome wrap
  • Mebius color shift wrap
  • Mebius carbon fiber wrap
  • Mebius camo and patterned wrap

How much vinyl to wrap a Daihatsu Mebius

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2013–nowwagon (5 doors)181.7 in (4,615 mm) to 182.3 in (4,630 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Mebius wrap cost factors

Mebius wrap cost depends on the film type, the installer's labor, and the condition of the body. The car is 181.7 in (4,615 mm) to 182.3 in (4,630 mm) long, which sets the amount of material. A full wrap needs about 62 ft (19 m) of 60-inch (1.52 m) cast film, or about 72 ft (22 m) for chrome or patterned film. Extra work like removing door handles or roof rails adds time.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2014: bumpers and lights differ between the versions, and so do the film cuts.

Mebius wraps by generation

Swipe sideways. Tap a card for the full description.

Daihatsu Mebius, first generation, factory photo
Factory color shown

2013–now Mebius wagon (first generation)

2013–nowwagon (5 doors)181.7 in (4,615 mm) to 182.3 in (4,630 mm)

The Daihatsu Mebius first generation (2013–now) was restyled in 2014. The bumpers and lights changed, so film cut for one version does not fit the other. The body is a five-door wagon, 181.7 in (4,615 mm) to 182.3 in (4,630 mm) long. Counting the film estimate helps when ordering for a full wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Mebius

A partial wrap on a Daihatsu Mebius can cover the roof, hood, or mirror caps. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film on the front end. These jobs use less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Daihatsu Mebius: body, cut-outs and film

The Daihatsu Mebius vinyl wrap follows a wagon body with five doors. The car is 181.7 in (4,615 mm) to 182.3 in (4,630 mm) long, so a full wrap is a medium job for one installer. Its size calls for careful film planning around the large side panels and roof. A wrap changes the look without affecting the body structure.

Mebius wrap ideas start with the tailgate, where the film ends at the edge of the rear glass. Installers cut around the glass and do not film over it. The door handles, mirrors, and roof rails also need cut-outs or removal for a clean finish. The large flat sides are good areas for vinyl graphics.

How much vinyl to wrap a Mebius depends on the version, because the car was restyled in 2014. The bumpers and lights changed, so film cut for one version does not fit the other. For a full wrap, the film estimate is about 62 ft (19 m) of 60-inch (1.52 m) cast film. A chrome or patterned film needs about 72 ft (22 m).

Questions about wrapping a Daihatsu Mebius

How much vinyl does it take to wrap a Daihatsu Mebius?

It takes about 62 ft (19 m) of 60-inch (1.52 m) cast film to wrap a Daihatsu Mebius. For chrome or patterned film, the amount is about 72 ft (22 m). This estimate covers the newest body of the first generation.

Which years of the Mebius take the same film cuts?

The Daihatsu Mebius has one generation, produced from 2013 onward. A restyling in 2014 changed the bumpers and lights. Film cuts for the 2013–2014 version do not fit the 2014–now version.

Can I wrap only the hood or the roof of a Mebius?

Yes, you can wrap only the hood or the roof of a Mebius. A partial wrap on this car can cover the roof, hood, or mirror caps. These jobs use less film than a full wrap.

Is a Mebius hard to wrap?

A Mebius is not hard to wrap, but it has some details. The tailgate has the rear glass in it, so the film ends at the edge of the glass. The car is 181.7 in (4,615 mm) to 182.3 in (4,630 mm) long, so large panels need care. The roof rails and door handles may need removal.