Wraps by car

Daihatsu Move Canbus wrap

The Daihatsu Move Canbus wrap is a vinyl wrap job on a tall mini van with one generation in this catalog. The first generation runs from 2016 to now and has a five-door van body. A full wrap of this newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film, or about 57 ft (17.5 m) for chrome or patterned film.

1generations15 mof film for a full wrap

Daihatsu Move Canbus, first generation, factory photo
Daihatsu Move Canbus, first generation. Factory color shown.

Daihatsu Move Canbus wrap colors and ideas

  • Move Canbus black wrap
  • Move Canbus white wrap
  • Move Canbus gray wrap
  • Move Canbus silver wrap
  • Move Canbus red wrap
  • Move Canbus blue wrap
  • Move Canbus green wrap
  • Move Canbus yellow wrap
  • Move Canbus orange wrap
  • Move Canbus purple wrap
  • Move Canbus pink wrap
  • Move Canbus teal wrap
  • Move Canbus brown wrap
  • Move Canbus gold wrap
  • Move Canbus chrome wrap
  • Move Canbus color shift wrap
  • Move Canbus carbon fiber wrap
  • Move Canbus camo and patterned wrap

How much vinyl to wrap a Daihatsu Move Canbus

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–nowvan (5 doors)133.7 in (3,395 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Move Canbus wrap cost factors

Move Canbus wrap cost depends on the size of the job and the film you choose. The 133.7 in (3,395 mm) long body needs about 49 ft (15 m) of cast film for a full color change, or about 57 ft (17.5 m) for chrome or patterned film. The sliding door tracks and the tall roof add labor, which also affects the total cost.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Move Canbus wraps by generation

Swipe sideways. Tap a card for the full description.

Daihatsu Move Canbus, first generation, factory photo
Factory color shown

2016–now Move Canbus van (first generation)

2016–nowvan (5 doors)133.7 in (3,395 mm)

The first generation Daihatsu Move Canbus, produced from 2016 to now, has sliding side doors. The tracks stay bare, and the film is cut along them so the doors can open without peeling the wrap. This detail adds a step compared to vans with regular hinged doors.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Move Canbus

Smaller jobs on a Move Canbus include a partial wrap of the roof, hood, and mirror caps. A chrome delete covers the window trim and badges with black film, and paint protection film (PPF) is clear film applied to the front end. These options let you change or protect parts of the van without a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Daihatsu Move Canbus: body, cut-outs and film

A Daihatsu Move Canbus vinyl wrap covers a compact van body that is 133.7 in (3,395 mm) long. The tall, boxy sides and five-door layout mean the film goes on in large, simple panels. The sliding side doors still require careful cutting along the track lines, so the doors can open without touching the film.

Move Canbus wrap ideas start with the sliding door tracks, which stay bare and decide where the film is cut. The door handles, badges, and window trim are removed for a clean finish, and the film is trimmed around lights and grille openings. The tall roof panel is done as one piece, with the antenna area cut out precisely.

To work out how much vinyl to wrap a Move Canbus, measure the generation you own. The first generation, from 2016 to now, is the only body in this catalog, so all years use the same estimate. A full wrap needs about 49 ft (15 m) of cast film, and if you choose chrome or patterned film, plan for about 57 ft (17.5 m).

Questions about wrapping a Daihatsu Move Canbus

How much vinyl does it take to wrap a Daihatsu Move Canbus?

It takes about 49 ft (15 m) of 60-inch (1.52 m) cast film to wrap a Daihatsu Move Canbus. For chrome or patterned film, the estimate is about 57 ft (17.5 m). These numbers cover the first generation body from 2016 to now.

Are the sliding doors of a Move Canbus wrapped?

Yes, the sliding doors of a Move Canbus are wrapped, but the door tracks stay bare. The film is cut along the tracks so the doors can open and close without catching the vinyl. This is standard on the first generation van from 2016 to now.

Can I wrap only the hood or the roof of a Move Canbus?

Yes, you can wrap only the hood or the roof of a Move Canbus as a partial wrap. A partial wrap can also include the mirror caps, and a chrome delete covers window trim and badges. Paint protection film (PPF) is another partial option for the front end.

Is a Move Canbus hard to wrap?

A Move Canbus is not hard to wrap for a professional, but the sliding door tracks add work. The film must be cut along the tracks so the doors operate freely, and the tall, boxy body has large panels that need careful handling. With 133.7 in (3,395 mm) of length, it is a manageable size for a mini van.