Wraps by car

Daihatsu Wake wrap

The Daihatsu Wake wrap page covers the first generation, which has been in production from 2014 to now. A full vinyl wrap of this tall minivan takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the estimate to about 57 ft (17.5 m). The Wake is a compact van with five doors and a body length of 133.7 in (3,395 mm).

1generations15.5 mof film for a full wrap

Daihatsu Wake, first generation, factory photo
Daihatsu Wake, first generation. Factory color shown.

Daihatsu Wake wrap colors and ideas

  • Wake black wrap
  • Wake white wrap
  • Wake gray wrap
  • Wake silver wrap
  • Wake red wrap
  • Wake blue wrap
  • Wake green wrap
  • Wake yellow wrap
  • Wake orange wrap
  • Wake purple wrap
  • Wake pink wrap
  • Wake teal wrap
  • Wake brown wrap
  • Wake gold wrap
  • Wake chrome wrap
  • Wake color shift wrap
  • Wake carbon fiber wrap
  • Wake camo and patterned wrap

How much vinyl to wrap a Daihatsu Wake

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–nowvan (5 doors)133.7 in (3,395 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Wake wrap cost factors

Wake wrap cost depends on the size of the vehicle and the type of film. The Wake needs about 51 ft (15.5 m) of 60-inch cast film for a standard color change, which is a moderate amount for a minivan. The tall body and sliding doors add labor because the roof is wrapped from a platform and the film is cut along the door tracks. The final price is set by the shop's labor rate and the film brand.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (72.2 in (1,835 mm)): the roof is wrapped from a platform.

Wake wraps by generation

Swipe sideways. Tap a card for the full description.

Daihatsu Wake, first generation, factory photo
Factory color shown

2014–now Wake van (first generation)

2014–nowvan (5 doors)133.7 in (3,395 mm)

The first generation Daihatsu Wake has sliding side doors that shape the wrap process. The door tracks stay bare, so the installer cuts the vinyl along the tracks and does not wrap inside them. This leaves a clean line where the film meets the track, and the doors themselves can be wrapped normally. The tall roof also means the installer works from a platform for the upper sections.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (72.2 in (1,835 mm)): the roof is wrapped from a platform.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Wake

A partial wrap on a Wake can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film, which is a small job. Paint protection film (PPF) is often applied as clear film on the front end to guard against stone chips. These smaller jobs use less material than a full wrap and can be done without wrapping the door tracks.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Daihatsu Wake: body, cut-outs and film

The Daihatsu Wake vinyl wrap is affected by the van's compact footprint and tall roof. At 133.7 in (3,395 mm) long and 72.2 in (1,835 mm) high, the body has large, flat side panels but also deep recesses around the doors. The five-door body means fewer large panels than a two-door car, but more edges and trim lines to work around. Because of the tall roof, installers need a platform to reach the center of the roof.

Wake wrap ideas must account for the sliding side doors and their tracks. The door tracks stay bare, so the film is cut cleanly along them and no vinyl is applied inside the channels. The tall body means the roof is wrapped from a platform, which adds time to the job. The front and rear bumpers are straightforward, but the high roofline makes the roof one of the larger single panels.

To work out how much vinyl to wrap a Wake, the only body style is a van with five doors. There is just one generation, produced from 2014 to now, so film quantities stay the same for every Wake. A full wrap uses about 51 ft (15.5 m) of 60-inch cast film, or about 57 ft (17.5 m) for chrome or patterned film. The tall roof and the sliding door cut-outs are the main factors in the film estimate.

Questions about wrapping a Daihatsu Wake

How much vinyl does it take to wrap a Daihatsu Wake?

How much vinyl does it take to wrap a Daihatsu Wake? It takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for a full wrap of the Wake. Chrome or patterned film raises the estimate to about 57 ft (17.5 m). The tall body and sliding door cut-outs are included in these figures.

Are the sliding doors of a Wake wrapped?

Are the sliding doors of a Wake wrapped? Yes, the sliding doors themselves are wrapped, but the tracks stay bare. The film is cut along the tracks so the doors can still slide freely. The tracks are not covered with vinyl, which would interfere with the door mechanism.

Can I wrap only the hood or the roof of a Wake?

Can I wrap only the hood or the roof of a Wake? Yes, a partial wrap can cover just the roof, the hood, or the mirror caps. The roof is a large panel that is wrapped from a platform because of the van's height. You can also get a chrome delete on the window trim and badges, or clear paint protection film on the front end.

Is a Wake hard to wrap?

Is a Wake hard to wrap? The Wake is not the hardest vehicle to wrap, but it has a few challenges. The tall body means the roof is wrapped from a platform, which adds labor. The sliding side doors require careful cutting along the tracks, and those tracks stay bare. The boxy shape helps with the large flat panels, but the door recesses still need attention.