Wraps by car

Daihatsu Thor wrap

The Daihatsu Thor wrap page covers the first generation built from 2016 to now. This minivan has one cataloged generation with a five-door van body. A full vinyl wrap of the newest body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film.

1generations17.5 mof film for a full wrap

Daihatsu Thor, first generation, factory photo
Daihatsu Thor, first generation. Factory color shown.

Daihatsu Thor wrap colors and ideas

  • Thor black wrap
  • Thor white wrap
  • Thor gray wrap
  • Thor silver wrap
  • Thor red wrap
  • Thor blue wrap
  • Thor green wrap
  • Thor yellow wrap
  • Thor orange wrap
  • Thor purple wrap
  • Thor pink wrap
  • Thor teal wrap
  • Thor brown wrap
  • Thor gold wrap
  • Thor chrome wrap
  • Thor color shift wrap
  • Thor carbon fiber wrap
  • Thor camo and patterned wrap

How much vinyl to wrap a Daihatsu Thor

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–nowvan (5 doors)146.7 in (3,725 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Thor wrap cost factors

Thor wrap cost depends on the size of the vehicle and the amount of film used. The first generation needs about 57 ft (17.5 m) of 60-inch (1.52 m) cast film for a full wrap. Extra film is required for chrome or patterned finishes. Labor adds to the total because sliding doors and cut-outs take more time.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Thor wraps by generation

Swipe sideways. Tap a card for the full description.

Daihatsu Thor, first generation, factory photo
Factory color shown

2016–now Thor van (first generation)

2016–nowvan (5 doors)146.7 in (3,725 mm)

The first generation Daihatsu Thor from 2016 to now is a five-door van. Its sliding side doors have tracks that stay bare, so the film is cut along them. This design limits where the vinyl can be applied on the doors.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Thor

A partial wrap on a Daihatsu Thor can cover the roof, hood, or mirror caps. Thor chrome delete covers window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Daihatsu Thor: body, cut-outs and film

A Daihatsu Thor vinyl wrap has to fit a van body that is 146.7 in (3,725 mm) long. The five-door layout adds door edges and handles that need precise cutting. Sliding side doors leave the tracks bare, so the film is trimmed along them.

Thor wrap ideas include color changes, partial wraps, and paint protection film (PPF). The sliding side door tracks stay bare and decide where the film is cut. Installers may remove door handles and badges for a cleaner finish.

How much vinyl to wrap a Thor depends on the size of the body. The first generation from 2016 to now is the only cataloged version, so film estimates are stable. Measure your specific van if it has added spoilers or body kits.

Questions about wrapping a Daihatsu Thor

How much vinyl does it take to wrap a Daihatsu Thor?

It takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film to wrap a Daihatsu Thor. Chrome or patterned film requires about 66 ft (20 m). The extra material accounts for matching patterns or trimming.

Are the sliding doors of a Thor wrapped?

Yes, the sliding doors of a Thor are wrapped, but the tracks stay bare. The film is cut along the door tracks. This leaves the mechanical area exposed for proper operation.

Can I wrap only the hood or the roof of a Thor?

Yes, you can wrap only the hood or the roof of a Thor. Partial wrap jobs on this minivan often include the roof, hood, and mirror caps. You can also choose chrome delete for the window trim and badges.

Is a Thor hard to wrap?

A Thor is moderately hard to wrap because of its sliding side doors. The door tracks stay bare, so the film must be cut precisely along them. The van body is 146.7 in (3,725 mm) long, which adds surface area to cover.