Wraps by car

Holden Apollo wrap

The Holden Apollo wrap page covers the 1991–1996 mid-size sedan and wagon in its single generation. A full vinyl wrap takes about 52 ft (16 m) for the sedan and up to 64 ft (19.5 m) for the wagon.

1generations16 mof film for a full wrap

Holden Apollo, first generation, factory photo
Holden Apollo, first generation. Factory color shown.

Holden Apollo wrap colors and ideas

  • Apollo black wrap
  • Apollo white wrap
  • Apollo gray wrap
  • Apollo silver wrap
  • Apollo red wrap
  • Apollo blue wrap
  • Apollo green wrap
  • Apollo yellow wrap
  • Apollo orange wrap
  • Apollo purple wrap
  • Apollo pink wrap
  • Apollo teal wrap
  • Apollo brown wrap
  • Apollo gold wrap
  • Apollo chrome wrap
  • Apollo color shift wrap
  • Apollo carbon fiber wrap
  • Apollo camo and patterned wrap

How much vinyl to wrap a Holden Apollo

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1991–1996sedan, wagon (4 or 5 doors)186.0 in (4,725 mm) to 188.8 in (4,795 mm)about 52 ft (16 m) for the sedan to 64 ft (19.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m)

Apollo wrap cost factors

Apollo wrap cost depends on body style, film choice, and how much of the car is covered. The wagon uses about 12 ft (3.5 m) more film than the sedan and has a larger tailgate to finish. Chrome or patterned film pushes the estimate up to about 74 ft (22.5 m) because of extra trimming waste.

  • Film for a full wrap: about 52 ft (16 m) for the sedan to 64 ft (19.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Apollo wraps by generation

Swipe sideways. Tap a card for the full description.

Holden Apollo, first generation, factory photo
Factory color shown

1991–1996 Apollo sedan, wagon (first generation)

1991–1996sedan, wagon (4 or 5 doors)186.0 in (4,725 mm) to 188.8 in (4,795 mm)

The first-generation Holden Apollo came as a four-door sedan and a five-door wagon. The sedan's lower roof and shorter rear mean simpler panel joins and less film. The wagon's taller tailgate and extra side glass make it the longer job of the two.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) for the sedan to 64 ft (19.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on an Apollo

A partial wrap on an Apollo can be as small as the roof, hood, or mirror caps. Chrome delete covers the window trim and badges with black film, and paint protection film (PPF) is a clear film on the front end. Each of these jobs uses far less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Holden Apollo: body, cut-outs and film

A Holden Apollo vinyl wrap has to follow both sedan and wagon body shapes. The sedan runs 186.0 in (4,725 mm) long, while the wagon reaches 188.8 in (4,795 mm) with a taller rear section. The wagon adds film over the D-pillars and roof rails, so it needs roughly 12 ft (3.5 m) more material.

Apollo wrap ideas start with the tailgate, where the film ends cleanly at the edge of the rear glass. The rear glass is set into the tailgate, so you trim the film along its rubber seal. Door handles, mirrors, and badges also come off or get relief cuts for a smooth finish.

If you are working out how much vinyl to wrap an Apollo, the sedan and wagon are the two numbers to know. The sedan uses about 52 ft (16 m) of 60-inch (1.52 m) cast film, and the wagon uses about 64 ft (19.5 m). Chrome or patterned film adds waste, so order up to about 74 ft (22.5 m) for either body.

Questions about wrapping a Holden Apollo

How much vinyl does it take to wrap a Holden Apollo?

A full wrap takes about 52 ft (16 m) for the sedan and about 64 ft (19.5 m) for the wagon, using 60-inch (1.52 m) cast film. Chrome or patterned film can require up to about 74 ft (22.5 m).

Which Apollo body takes more film?

The wagon takes more film than the sedan. The wagon's estimate is about 64 ft (19.5 m), while the sedan's is about 52 ft (16 m). The extra length comes from the wagon's taller tailgate and longer roof.

Can I wrap only the hood or the roof of an Apollo?

Yes, you can wrap only the hood or the roof. A partial wrap on an Apollo commonly covers the roof, hood, or mirror caps. You can also do a chrome delete on the window trim and badges, or paint protection film on just the front end.

Is an Apollo hard to wrap?

An Apollo is not especially hard to wrap, but the tailgate adds work because the rear glass is set into it. The film must be trimmed neatly at the edge of the glass. The wagon's larger size and extra side glass also mean more panel joins to finish.