Wraps by car

Holden Vectra wrap

The Holden Vectra wrap guide covers the mid-size Holden Vectra produced from 1998 to 2003. This page covers one generation of the Vectra in hatchback and sedan body styles. A full vinyl wrap of the newest body takes about 49 ft (15 m) for the sedan to 51 ft (15.5 m) for the hatchback.

1generations15 mof film for a full wrap

Holden Vectra, first generation, factory photo
Holden Vectra, first generation. Factory color shown.

Holden Vectra wrap colors and ideas

  • Vectra black wrap
  • Vectra white wrap
  • Vectra gray wrap
  • Vectra silver wrap
  • Vectra red wrap
  • Vectra blue wrap
  • Vectra green wrap
  • Vectra yellow wrap
  • Vectra orange wrap
  • Vectra purple wrap
  • Vectra pink wrap
  • Vectra teal wrap
  • Vectra brown wrap
  • Vectra gold wrap
  • Vectra chrome wrap
  • Vectra color shift wrap
  • Vectra carbon fiber wrap
  • Vectra camo and patterned wrap

How much vinyl to wrap a Holden Vectra

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2003hatchback, sedan (4 or 5 doors)176.3 in (4,477 mm)about 49 ft (15 m) for the sedan to 51 ft (15.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m)

Vectra wrap cost factors

Vectra wrap cost depends on the body style, film choice, and the amount of labor for disassembly. The sedan and hatchback differ slightly in film amount, with the hatchback needing about 2 ft more film. Chrome or patterned film can add up to about 13 ft more material than a standard color change. Surface preparation and removal of parts like door handles and badges also affect the total cost.

  • Film for a full wrap: about 49 ft (15 m) for the sedan to 51 ft (15.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).
  • Body: hatchback, sedan (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Vectra wraps by generation

Swipe sideways. Tap a card for the full description.

Holden Vectra, first generation, factory photo
Factory color shown

1998–2003 Vectra hatchback, sedan (first generation)

1998–2003hatchback, sedan (4 or 5 doors)176.3 in (4,477 mm)

The first generation Holden Vectra was offered as a hatchback and sedan from 1998 to 2003. The body style decides the panel plan and the film amount. The hatchback tailgate includes the rear glass, so the film must be trimmed at the glass edge. Both styles have four doors plus the tailgate or trunk lid.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) for the sedan to 51 ft (15.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Vectra

For a Vectra chrome delete, the window trim and badges can be covered with black film. A partial wrap on the Vectra can include the roof, hood, and mirror caps. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film and are quicker to install than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Holden Vectra: body, cut-outs and film

The Holden Vectra vinyl wrap depends on the body style and size of the car. The Vectra is a mid-size model with a length of 176.3 in (4,477 mm) and four or five doors. The hatchback and sedan share the same panel layout for most surfaces. The tailgate with the rear glass in it means the film ends at the edge of the glass.

Vectra wrap ideas start with removing or masking parts that need cut-outs. The tailgate includes the rear glass, so the wrap film is trimmed at the glass edge. Door handles, badges, and trim pieces are removed for a clean installation. The mirrors and roof rails are often wrapped separately for a neat finish.

How much vinyl to wrap a Vectra depends on the body style and film type. The sedan needs about 49 ft (15 m) of 60-inch (1.52 m) cast film, while the hatchback needs about 51 ft (15.5 m). Chrome or patterned film may require up to about 64 ft (19.5 m) due to pattern matching. There is only one generation in the catalog, so film amounts are consistent across the years.

Questions about wrapping a Holden Vectra

How much vinyl does it take to wrap a Holden Vectra?

A Holden Vectra wrap takes about 49 ft (15 m) for the sedan to 51 ft (15.5 m) for the hatchback. This estimate uses 60-inch (1.52 m) cast film. Chrome or patterned film may require up to about 64 ft (19.5 m) because of pattern matching and extra waste.

Which Vectra body takes more film?

The hatchback body takes more film than the sedan. The hatchback needs about 51 ft (15.5 m) compared to about 49 ft (15 m) for the sedan. The difference comes from the larger tailgate and rear panel area on the hatchback.

Can I wrap only the hood or the roof of a Vectra?

Yes, you can wrap only the hood or the roof of a Vectra. A partial wrap may include the roof, hood, and mirror caps. These smaller sections are a good way to change the look without a full wrap.

Is a Vectra hard to wrap?

The Vectra is not unusually hard to wrap, but the tailgate with the rear glass in it adds work. The film must end at the edge of the glass, which requires careful trimming. The car's mid-size dimensions mean more panels than a small car, but nothing out of the ordinary.