Wraps by car

Holden Frontera wrap

The Holden Frontera wrap page covers the first generation SUV sold from 1998 to 2003. A full vinyl wrap of this body uses about 62 ft (19 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 7 ft (2 m) to that total.

1generations19 mof film for a full wrap

Holden Frontera, first generation, factory photo
Holden Frontera, first generation. Factory color shown.

Holden Frontera wrap colors and ideas

  • Frontera black wrap
  • Frontera white wrap
  • Frontera gray wrap
  • Frontera silver wrap
  • Frontera red wrap
  • Frontera blue wrap
  • Frontera green wrap
  • Frontera yellow wrap
  • Frontera orange wrap
  • Frontera purple wrap
  • Frontera pink wrap
  • Frontera teal wrap
  • Frontera brown wrap
  • Frontera gold wrap
  • Frontera chrome wrap
  • Frontera color shift wrap
  • Frontera carbon fiber wrap
  • Frontera camo and patterned wrap

How much vinyl to wrap a Holden Frontera

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2003SUV (5 doors)184.3 in (4,680 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Frontera wrap cost factors

Frontera wrap cost depends on the amount of film and the labor time for this SUV. A full wrap uses about 62 ft (19 m) of cast film, and chrome or patterned film raises that to about 69 ft (21 m). The tall roof and the tailgate with rear glass add time to the installation. The condition of the paint also affects the preparation work.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Frontera wraps by generation

Swipe sideways. Tap a card for the full description.

Holden Frontera, first generation, factory photo
Factory color shown

1998–2003 Frontera SUV (first generation)

1998–2003SUV (5 doors)184.3 in (4,680 mm)

The first generation Holden Frontera wrap begins with a check of the paint age. Panels on a 1998–2003 SUV may be original or repainted, and a test spot comes before a full wrap. The installer uses the test spot to confirm the film bonds well to the surface.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Frontera

A partial wrap on the Holden Frontera can cover the roof, hood, or mirror caps. A Frontera chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Holden Frontera: body, cut-outs and film

The Holden Frontera vinyl wrap job is shaped by its single five-door SUV body style. The vehicle is 184.3 in (4,680 mm) long, which sets the size of the main panels. Wrapping a tall SUV body means working on larger doors and a higher roof than on a sedan. The straight sides and simple panel shapes keep the film layout straightforward.

Frontera wrap ideas start with the tailgate, which has the rear glass in it. The film ends at the edge of the glass on that panel, so the glass is masked before the wrap is applied. Door handles, mirrors, and badges are removed for a clean edge. The roof rails and antenna also need cut-outs or temporary removal.

For someone counting film, there is only one generation of the Holden Frontera in this catalog. The question of how much vinyl to wrap a Frontera always refers to the 1998–2003 SUV. There are no earlier or later bodies to compare in this guide.

Questions about wrapping a Holden Frontera

How much vinyl does it take to wrap a Holden Frontera?

It takes about 62 ft (19 m) of 60-inch (1.52 m) cast film to wrap a Holden Frontera. Chrome or patterned film adds about 7 ft (2 m) for a total of 69 ft (21 m).

Can I wrap only the hood or the roof of a Frontera?

Yes, you can wrap only the hood or the roof of a Frontera. Partial wrap jobs on this car include the roof, hood, and mirror caps.

Is a Frontera hard to wrap?

A Frontera is not hard to wrap, but the tailgate adds work. The rear glass is set into the tailgate, so the film ends at the edge of the glass. The SUV body is also large at 184.3 in (4,680 mm) long.

How many generations of the Frontera does this page cover?

This page covers one generation of the Frontera. The catalog includes the first generation sold from 1998 to 2003.