Wraps by car

Holden Monaro wrap

The Holden Monaro wrap page covers the first generation Monaro, produced from 2001 to 2005 as a two-door coupe. A full vinyl wrap on this body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. If you choose a chrome or patterned film, plan for about 64 ft (19.5 m). The Monaro is a mid-size car with a length of 188.6 in (4,790 mm).

1generations16 mof film for a full wrap

Holden Monaro, first generation, factory photo
Holden Monaro, first generation. Factory color shown.

Holden Monaro wrap colors and ideas

  • Monaro black wrap
  • Monaro white wrap
  • Monaro gray wrap
  • Monaro silver wrap
  • Monaro red wrap
  • Monaro blue wrap
  • Monaro green wrap
  • Monaro yellow wrap
  • Monaro orange wrap
  • Monaro purple wrap
  • Monaro pink wrap
  • Monaro teal wrap
  • Monaro brown wrap
  • Monaro gold wrap
  • Monaro chrome wrap
  • Monaro color shift wrap
  • Monaro carbon fiber wrap
  • Monaro camo and patterned wrap

How much vinyl to wrap a Holden Monaro

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2001–2005coupe (2 doors)188.6 in (4,790 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Monaro wrap cost factors

Monaro wrap cost depends mainly on the film you choose and the condition of the paint. A standard cast vinyl wrap for this car uses about 52 ft (16 m), while a chrome or patterned film needs about 64 ft (19.5 m). The coupe body has just two side doors, which reduces labor on door jambs. Any repairs or paint correction before wrapping will add to the total.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Monaro wraps by generation

Swipe sideways. Tap a card for the full description.

Holden Monaro, first generation, factory photo
Factory color shown

2001–2005 Monaro coupe (first generation)

2001–2005coupe (2 doors)188.6 in (4,790 mm)

The first generation Monaro, built from 2001 to 2005, is a two-door coupe with a length of 188.6 in (4,790 mm). On a car of these years, panels may be original or repainted, and a test spot on the paint should come before a full wrap. The long doors are each one large piece of film, so the wrap goes faster than on a four-door body. The roof and hood are straightforward single-panel areas.

Two long side doors: each door is one large piece of film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Monaro

A partial wrap on a Monaro can cover the roof, hood, and mirror caps in a contrasting film. For a Monaro chrome delete, you wrap the window trim and badges with black film to change the brightwork. Paint protection film is applied as clear film on the front end to guard against stone chips. These smaller jobs use less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Holden Monaro: body, cut-outs and film

A Holden Monaro vinyl wrap on this coupe uses its body style to keep panel work straightforward. The car has only two long doors, so there are no rear door gaps to align film across. Its length of 188.6 in (4,790 mm) is within the range where one installer can handle a full side panel. The roof and rear pillars are smooth enough for a single piece each.

Monaro wrap ideas can include covering the roof, hood, and side mirrors with a contrasting color. The two long side doors are each one large piece of film, so you do not need to splice smaller panels. Window trim and badges can be covered for a chrome delete using black film. If you want clear protection, paint protection film (PPF) on the front end is a separate job.

Deciding how much vinyl to wrap a Monaro depends on whether you choose standard cast film or a patterned product. A standard color change wrap on this 2001–2005 coupe uses about 52 ft (16 m) of 60-inch (1.52 m) film. With chrome or patterned film, you need about 64 ft (19.5 m) because the pattern must line up across panels. Always add a little extra for mistakes and trimming.

Questions about wrapping a Holden Monaro

How much vinyl does it take to wrap a Holden Monaro?

It takes about 52 ft (16 m) of 60-inch (1.52 m) cast film to wrap a Holden Monaro. If you choose a chrome or patterned film, the amount rises to about 64 ft (19.5 m). That covers the coupe body with some extra for trimming.

Can I wrap only the hood or the roof of a Monaro?

Yes, you can wrap only the hood or the roof of a Monaro. These are common partial wrap areas along with mirror caps. Doing just those panels uses much less film than a full wrap.

Is a Monaro hard to wrap?

A Monaro is not hard to wrap, but its size and door length add some work. The car is 188.6 in (4,790 mm) long, and each of the two side doors is one large piece of film. You need to handle large sheets carefully, but there are no rear doors to complicate the job.

How many generations of the Monaro does this page cover?

This page covers one generation of the Monaro. That generation was produced from 2001 to 2005 as a two-door coupe.