Wraps by car

Holden Commodore wrap

The Holden Commodore wrap page covers the second and third generations from 1990 to 2002. A full vinyl wrap of the newest sedan body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. The wagon body needs about 69 ft (21 m) of the same film.

2generations16.5 mof film for a full wrap

Holden Commodore, third generation, factory photo
Holden Commodore, third generation. Factory color shown.

Holden Commodore wrap colors and ideas

  • Commodore black wrap
  • Commodore white wrap
  • Commodore gray wrap
  • Commodore silver wrap
  • Commodore red wrap
  • Commodore blue wrap
  • Commodore green wrap
  • Commodore yellow wrap
  • Commodore orange wrap
  • Commodore purple wrap
  • Commodore pink wrap
  • Commodore teal wrap
  • Commodore brown wrap
  • Commodore gold wrap
  • Commodore chrome wrap
  • Commodore color shift wrap
  • Commodore carbon fiber wrap
  • Commodore camo and patterned wrap

How much vinyl to wrap a Holden Commodore

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1997–2002sedan, wagon (4 or 5 doors)192.6 in (4,891 mm) to 198.4 in (5,040 mm)about 54 ft (16.5 m) for the sedan to 69 ft (21 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 77 ft (23.5 m)
1990–1997sedan, wagon (4 or 5 doors)191.4 in (4,861 mm) to 193.0 in (4,903 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Commodore wrap cost factors

The Commodore wrap cost depends mainly on the body style and the condition of the paint. A wagon uses more film than a sedan: about 69 ft (21 m) compared with 54 ft (16.5 m) on the third generation. Removing trim and repairing paint chips before the wrap add labour time.

  • Film for a full wrap: about 54 ft (16.5 m) for the sedan to 69 ft (21 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 77 ft (23.5 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Commodore wraps by generation

Swipe sideways. Tap a card for the full description.

Holden Commodore, third generation, factory photo
Factory color shown

1997–2002 Commodore sedan, wagon (third generation)

1997–2002sedan, wagon (4 or 5 doors)192.6 in (4,891 mm) to 198.4 in (5,040 mm)

The third generation Commodore from 1997 to 2002 offers a four-door sedan and a five-door wagon, and the style decides the panel plan and the film amount. The sedan uses about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. The wagon uses about 69 ft (21 m) of the same film because of the taller tailgate and roof.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 54 ft (16.5 m) for the sedan to 69 ft (21 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 77 ft (23.5 m).

Holden Commodore, second generation, factory photo
Factory color shown

1990–1997 Commodore sedan, wagon (second generation)

1990–1997sedan, wagon (4 or 5 doors)191.4 in (4,861 mm) to 193.0 in (4,903 mm)

The second generation Commodore from 1990 to 1997 has paint age as a key concern: on a car of these years panels may be original or repainted, and a test spot comes before a full wrap. The film amount is about 59 ft (18 m) of 60-inch (1.52 m) cast film for both the sedan and the wagon. Wrapping over old paint requires careful cleaning and adhesion testing.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Commodore

A partial wrap on a Holden Commodore can cover the roof, hood, or mirror caps as individual pieces. Commodore chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Holden Commodore: body, cut-outs and film

The Holden Commodore vinyl wrap is planned around two body styles: a four-door sedan and a five-door wagon. The sedan measures 192.6 in (4,891 mm) to 198.4 in (5,040 mm), and the wagon shares the same size range. The wagon's taller rear and longer roof add about 15 ft (4.5 m) of film compared with the sedan.

Commodore wrap ideas must account for a tailgate that has the rear glass in it, so the film ends at the edge of the glass. The door handles, mirrors, and badges should be removed for a clean finish. The roof rails on the wagon need careful trimming around the mounting points.

When you count how much vinyl to wrap a Commodore, the second generation takes more film than the third. The 1990–1997 sedan and wagon body needs about 59 ft (18 m) of 60-inch (1.52 m) cast film. The 1997–2002 sedan needs about 54 ft (16.5 m) and the wagon about 69 ft (21 m).

Questions about wrapping a Holden Commodore

How much vinyl does it take to wrap a Holden Commodore?

About 54 ft (16.5 m) of 60-inch (1.52 m) cast film is needed for a full wrap of the newest Commodore sedan. The wagon body takes more, about 69 ft (21 m) of the same film.

Which Commodore body takes more film?

The wagon takes more film than the sedan. On the third generation Commodore the wagon needs about 69 ft (21 m) and the sedan about 54 ft (16.5 m) of 60-inch (1.52 m) cast film.

Can I wrap only the hood or the roof of a Commodore?

Yes, a partial wrap of just the hood or the roof is possible. These are listed as partial wrap jobs along with mirror caps, chrome delete, and paint protection film.

Is a Commodore hard to wrap?

A Commodore is not the easiest car to wrap because of the tailgate with the rear glass in it. The film must end at the edge of the glass, which demands precise cutting. The large panels and long roof also add work, especially on the wagon.