Wraps by car

Holden Statesman wrap

A Holden Statesman wrap covers this full-size sedan with a color change or protective vinyl film. The catalog shows two generations, the 1990–1998 first generation and the 1999–2006 second generation. A complete wrap of the newest Statesman body takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film.

2generations19.5 mof film for a full wrap

Holden Statesman, second generation, factory photo
Holden Statesman, second generation. Factory color shown.

Holden Statesman wrap colors and ideas

  • Statesman black wrap
  • Statesman white wrap
  • Statesman gray wrap
  • Statesman silver wrap
  • Statesman red wrap
  • Statesman blue wrap
  • Statesman green wrap
  • Statesman yellow wrap
  • Statesman orange wrap
  • Statesman purple wrap
  • Statesman pink wrap
  • Statesman teal wrap
  • Statesman brown wrap
  • Statesman gold wrap
  • Statesman chrome wrap
  • Statesman color shift wrap
  • Statesman carbon fiber wrap
  • Statesman camo and patterned wrap

How much vinyl to wrap a Holden Statesman

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2006sedan (4 doors)206.2 in (5,237 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)
1990–1998sedan (4 doors)196.4 in (4,989 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Statesman wrap cost factors

Statesman wrap cost depends on the size of the car and the film that is ordered. The two sedan bodies are 196.4 in (4,989 mm) and 206.2 in (5,237 mm) long, so a full wrap uses 61 to 74 ft (18.5 to 22.5 m) of film depending on the generation and the finish. Labor is set by the number of panels, the removal of bumpers and handles, and the work on the bright trim.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: sedan (4 doors).

Statesman wraps by generation

Swipe sideways. Tap a card for the full description.

Holden Statesman, second generation, factory photo
Factory color shown

1999–2006 Statesman sedan (second generation)

1999–2006sedan (4 doors)206.2 in (5,237 mm)

The 1999–2006 second generation Holden Statesman is a 1999–2006 full-size sedan with four doors. Paint age is a real check on a car of these years, as a panel may be original or repainted. A test spot on each panel shows whether the film will lift a weak clear coat before a full wrap begins. The 206.2 in (5,237 mm) body takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film, and a patterned film raises the total to about 74 ft (22.5 m).

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Holden Statesman, first generation, factory photo
Factory color shown

1990–1998 Statesman sedan (first generation)

1990–1998sedan (4 doors)196.4 in (4,989 mm)

The 1990–1998 first generation Holden Statesman is a 1990–1998 full-size sedan with four doors. The length of 196.4 in (4,989 mm) sets the amount of film for the large flat panels of the hood, roof, and trunk lid. A full wrap uses about 61 ft (18.5 m) of 60-inch (1.52 m) cast film, rising to about 70 ft (21.5 m) with chrome or patterned film.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Statesman

A Statesman chrome delete covers the window trim and badges in black film for a cleaner look without a full color change wrap. A partial wrap can be done on the roof, the hood, or the mirror caps instead of the whole car. Paint protection film (PPF) is a clear wrap on the front end that guards the bumper, hood, and fenders from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Holden Statesman: body, cut-outs and film

A Holden Statesman vinyl wrap has to work around a long four-door sedan body. The 1999–2006 car is 206.2 in (5,237 mm) long and the 1990–1998 car is 196.4 in (4,989 mm). These lengths mean film rolls are planned in full sheets for the roof, hood, and doors. The four door cut lines and the large rear quarter panels add to the time of the install.

Statesman wrap ideas often start with the bright trim the car carries. The window surrounds, door handles, and badges are wrapped in black film for a chrome delete. The bumpers come off for edge wrapping and the door handles are removed before the film goes on. The side mirrors are wrapped off the car so the film can be folded behind the glass.

How much vinyl to wrap a Statesman differs by the generation of the car. A first generation 1990–1998 body needs about 61 ft (18.5 m) of 60-inch (1.52 m) cast film, while a second generation 1999–2006 body needs about 64 ft (19.5 m). A chrome or patterned film adds waste, so the same car can take about 70 ft (21.5 m) for the first generation and about 74 ft (22.5 m) for the second.

Questions about wrapping a Holden Statesman

How much vinyl does it take to wrap a Holden Statesman?

A full wrap of a Holden Statesman takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. That figure is for the newest body, the 1999–2006 second generation. A first generation 1990–1998 body needs about 61 ft (18.5 m) of the same film.

Can I wrap only the hood or the roof of a Statesman?

Yes, you can wrap only the hood or the roof of a Statesman. A partial wrap covers any single panel such as the roof, the hood, or the mirror caps. Paint protection film on the front end is also done without wrapping the whole car.

Is a Statesman hard to wrap?

A Statesman is not hard to wrap, but its size adds work. The long 206.2 in (5,237 mm) second generation body has large roof and quarter panels that need two installers to handle the film without creasing it. The bright window trim and door handles have to be removed or wrapped with care.

How many generations of the Statesman does this page cover?

This page covers two generations of the Holden Statesman. The first generation runs 1990–1998 and the second generation runs 1999–2006. Both are four-door sedans, but the second generation is longer at 206.2 in (5,237 mm) compared to 196.4 in (4,989 mm).