Wraps by car

Holden Jackaroo wrap

The Holden Jackaroo wrap page covers the 1998–2003 SUV and the vinyl wrap amounts it needs. This first generation is the only generation in the catalog. A full wrap of the newest body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film.

1generations18.5 mof film for a full wrap

Holden Jackaroo, first generation, factory photo
Holden Jackaroo, first generation. Factory color shown.

Holden Jackaroo wrap colors and ideas

  • Jackaroo black wrap
  • Jackaroo white wrap
  • Jackaroo gray wrap
  • Jackaroo silver wrap
  • Jackaroo red wrap
  • Jackaroo blue wrap
  • Jackaroo green wrap
  • Jackaroo yellow wrap
  • Jackaroo orange wrap
  • Jackaroo purple wrap
  • Jackaroo pink wrap
  • Jackaroo teal wrap
  • Jackaroo brown wrap
  • Jackaroo gold wrap
  • Jackaroo chrome wrap
  • Jackaroo color shift wrap
  • Jackaroo carbon fiber wrap
  • Jackaroo camo and patterned wrap

How much vinyl to wrap a Holden Jackaroo

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2003SUV (5 doors)183.5 in (4,661 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Jackaroo wrap cost factors

Jackaroo wrap cost depends mainly on the film type: a color change wrap uses about 61 ft (18.5 m) of cast film, while chrome or patterned film needs about 76 ft (23 m). The tall roof (72.4 in (1,840 mm)) requires a platform, which adds labor time. The amount of cut-outs, such as the tailgate glass and door handles, also affects the final cost.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (72.4 in (1,840 mm)): the roof is wrapped from a platform.

Jackaroo wraps by generation

Swipe sideways. Tap a card for the full description.

Holden Jackaroo, first generation, factory photo
Factory color shown

1998–2003 Jackaroo SUV (first generation)

1998–2003SUV (5 doors)183.5 in (4,661 mm)

The first generation Holden Jackaroo (1998–2003) is a tall vehicle at 72.4 in (1,840 mm), so the roof is wrapped from a platform and takes more time. This generation has a tailgate with the rear glass in it, so the film ends at the edge of the glass. The five-door SUV body has large panels that are straightforward to wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (72.4 in (1,840 mm)): the roof is wrapped from a platform.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Jackaroo

Partial wrap options for the Jackaroo include the roof, hood, and mirror caps, which can change the look without a full wrap. Jackaroo chrome delete covers the window trim and badges with black film for a different style. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Holden Jackaroo: body, cut-outs and film

The Holden Jackaroo vinyl wrap is sized for a five-door SUV that measures 183.5 in (4,661 mm) long and 72.4 in (1,840 mm) tall. The tall body means the roof is wrapped from a platform, which adds time. Large flat side panels take film quickly, but the tall tailgate with glass in it needs careful trimming.

Jackaroo wrap ideas include covering the large hood, the roof, and the doors, while the tailgate film ends at the edge of the rear glass. The door handles, mirrors, and badges come off for a clean install. The rear bumper and the roof rails require extra cutting and patience.

How much vinyl to wrap a Jackaroo depends on the film type: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film, or about 76 ft (23 m) of chrome or patterned film. The single 1998–2003 generation has the same body dimensions throughout production. A full wrap on this SUV uses more film than a smaller car because of the tall sides and roof.

Questions about wrapping a Holden Jackaroo

How much vinyl does it take to wrap a Holden Jackaroo?

About 61 ft (18.5 m) of 60-inch (1.52 m) cast film is needed for a full wrap of a Holden Jackaroo. If you choose chrome or patterned film, the estimate is about 76 ft (23 m). These figures are for the newest body, the first generation from 1998–2003.

Can I wrap only the hood or the roof of a Jackaroo?

Yes, you can wrap only the hood or the roof of a Jackaroo. Partial wrap options include the roof, hood, and mirror caps. A chrome delete (bright trim covered with black film) is another smaller job that covers window trim and badges.

Is a Jackaroo hard to wrap?

A Jackaroo is not the easiest vehicle to wrap because of its tall roof, which requires a platform. The tailgate with the rear glass in it means the film must be trimmed precisely at the glass edge. At 72.4 in (1,840 mm) tall and 183.5 in (4,661 mm) long, it has more surface area than a smaller car.

How many generations of the Jackaroo does this page cover?

This page covers one generation of the Jackaroo, the first generation from 1998–2003. It is the only generation in the catalog for this model. The body style for that generation is an SUV with five doors.