Wraps by car

Holden Barina wrap

The Holden Barina wrap page covers two generations of the subcompact hatchback. The fourth generation ran from 2001 to 2005 and the third generation from 1997 to 2000. A full vinyl wrap of the newest body takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film.

2generations13.5 mof film for a full wrap

Holden Barina, fourth generation, factory photo
Holden Barina, fourth generation. Factory color shown.

Holden Barina wrap colors and ideas

  • Barina black wrap
  • Barina white wrap
  • Barina gray wrap
  • Barina silver wrap
  • Barina red wrap
  • Barina blue wrap
  • Barina green wrap
  • Barina yellow wrap
  • Barina orange wrap
  • Barina purple wrap
  • Barina pink wrap
  • Barina teal wrap
  • Barina brown wrap
  • Barina gold wrap
  • Barina chrome wrap
  • Barina color shift wrap
  • Barina carbon fiber wrap
  • Barina camo and patterned wrap

How much vinyl to wrap a Holden Barina

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2001–2005hatchback (5 doors)150.3 in (3,817 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)
1997–2000hatchback (5 doors)147.3 in (3,741 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Barina wrap cost factors

Barina wrap cost depends on the film type, the size of the car, and the condition of the paint. A full wrap of this subcompact hatchback uses about 44 ft (13.5 m) of film. The number of panels is the same for both generations. Extra work on a tailgate with rear glass can add to the cost.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Barina wraps by generation

Swipe sideways. Tap a card for the full description.

Holden Barina, fourth generation, factory photo
Factory color shown

2001–2005 Barina hatchback (fourth generation)

2001–2005hatchback (5 doors)150.3 in (3,817 mm)

The fourth generation Holden Barina from 2001 to 2005 is a five-door hatchback. It is 150.3 in (3,817 mm) long and takes about 44 ft (13.5 m) of film. On a car of these years panels may be original or repainted. A test spot comes before a full wrap to check paint adhesion.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Holden Barina, third generation, factory photo
Factory color shown

1997–2000 Barina hatchback (third generation)

1997–2000hatchback (5 doors)147.3 in (3,741 mm)

The third generation Holden Barina from 1997 to 2000 is a five-door hatchback. It is 147.3 in (3,741 mm) long and takes about 44 ft (13.5 m) of film. The compact size and body style mean the wrap uses a manageable amount of film. The number of panels is small enough for a one-piece roof and tailgate wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Barina

A partial wrap on a Holden Barina can cover the roof, hood, or mirror caps. A chrome delete (bright trim covered with black film) suits the window trim and badges. Paint protection film (PPF) as a clear film on the front end is another option. Barina chrome delete and partial wrap jobs use less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Holden Barina: body, cut-outs and film

A Holden Barina vinyl wrap fits a five-door hatchback with a compact footprint. The fourth generation is 150.3 in (3,817 mm) long and the third generation is 147.3 in (3,741 mm) long. This size means fewer large panels and less film than on a longer car. The tailgate and roof still need careful handling around the glass.

Barina wrap ideas start with the tailgate on both generations. The tailgate has the rear glass in it, so the film ends at the edge of the glass. The installer removes badges, door handles, and mirror caps for a clean finish. Cut-outs around the glass and lights are part of the job.

If you need to know how much vinyl to wrap a Barina, the two generations are close in size. The fourth generation is about 3 in (76 mm) longer than the third. A full wrap of either body takes about 44 ft (13.5 m) of 60-inch (1.52 m) film. For chrome or patterned film, the third generation needs about 54 ft (16.5 m) and the fourth about 56 ft (17 m).

Questions about wrapping a Holden Barina

How much vinyl does it take to wrap a Holden Barina?

How much vinyl does it take to wrap a Holden Barina? A full wrap of the newest body takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, it takes about 56 ft (17 m).

Can I wrap only the hood or the roof of a Barina?

Can I wrap only the hood or the roof of a Barina? Yes, a partial wrap can cover the roof, hood, or mirror caps. You can also choose a chrome delete on the window trim and badges.

Is a Barina hard to wrap?

Is a Barina hard to wrap? The tailgate with the rear glass in it adds work because the film ends at the edge of the glass. The small size of the car makes the job easier than on a larger vehicle.

How many generations of the Barina does this page cover?

How many generations of the Barina does this page cover? This page covers two generations. The fourth generation is from 2001 to 2005 and the third generation from 1997 to 2000.