Wraps by car

Hyundai Entourage wrap

The Hyundai Entourage wrap is a full vinyl wrap for the first-generation Entourage minivan sold from 2006 to 2009. A complete color change wrap of this van takes about 79 ft (24 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 90 ft (27.5 m). This page covers the body, the tricky areas and the film amounts for a Hyundai Entourage wrap.

1generations24 mof film for a full wrap

Hyundai Entourage, first generation, factory photo
Hyundai Entourage, first generation. Factory color shown.

Hyundai Entourage wrap colors and ideas

  • Entourage black wrap
  • Entourage white wrap
  • Entourage gray wrap
  • Entourage silver wrap
  • Entourage red wrap
  • Entourage blue wrap
  • Entourage green wrap
  • Entourage yellow wrap
  • Entourage orange wrap
  • Entourage purple wrap
  • Entourage pink wrap
  • Entourage teal wrap
  • Entourage brown wrap
  • Entourage gold wrap
  • Entourage chrome wrap
  • Entourage color shift wrap
  • Entourage carbon fiber wrap
  • Entourage camo and patterned wrap

How much vinyl to wrap a Hyundai Entourage

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2009van (5 doors)202.0 in (5,130 mm)about 79 ft (24 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m)

Entourage wrap cost factors

Entourage wrap cost depends on the size of the van and the film you choose, not on a fixed shop price. A full wrap needs about 79 ft (24 m) of 60-inch (1.52 m) cast film, while chrome or patterned film needs about 90 ft (27.5 m). The tall body and sliding door tracks add labor time, which also affects the final cost. The number of cut-outs and how many parts are removed change the total as well.

  • Film for a full wrap: about 79 ft (24 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (71.5 in (1,816 mm)): the roof is wrapped from a platform.

Entourage wraps by generation

Swipe sideways. Tap a card for the full description.

Hyundai Entourage, first generation, factory photo
Factory color shown

2006–2009 Entourage van (first generation)

2006–2009van (5 doors)202.0 in (5,130 mm)

The first generation Hyundai Entourage has sliding side doors whose tracks stay bare and decide where the film is cut. This van has a tall body at 71.5 in (1,816 mm), so the roof is wrapped from a platform. The five-door body measures 202.0 in (5,130 mm) in length, which makes it a large single-piece wrap job. A full wrap of this generation uses about 79 ft (24 m) of 60-inch (1.52 m) cast film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (71.5 in (1,816 mm)): the roof is wrapped from a platform.

Film: about 79 ft (24 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m).

Roof, hood, chrome delete and PPF on an Entourage

For an Entourage chrome delete, the window trim and badges are covered with black film instead of a full wrap. A partial wrap on this minivan can be just the roof, hood or mirror caps, leaving the rest of the body in the original color. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. Each partial job uses less film than a full wrap but still needs careful cutting and edges.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Hyundai Entourage: body, cut-outs and film

A Hyundai Entourage vinyl wrap covers a long, tall minivan body with five doors including two sliding side doors. The van is 202.0 in (5,130 mm) long and 71.5 in (1,816 mm) tall, so a wrap uses more film than a small car. The large flat side panels are straightforward to wrap, but the roof needs a platform for safe access. Every panel is cut and installed to follow the factory body lines.

Entourage wrap ideas start with the sliding side doors, where the door tracks stay bare and decide where the film is cut. The tall body means the roof is wrapped from a platform, which adds time to the job. Door handles, mirrors and badges are removed for a clean edge, then reinstalled after the film is laid. Cut-outs are made for lights, antenna and the fuel filler flap.

If you need to know how much vinyl to wrap an Entourage, the first generation uses about 79 ft (24 m) of 60-inch (1.52 m) cast film. With chrome or patterned film you should plan on about 90 ft (27.5 m). There is only one production generation of the Entourage in the catalog, so the body size does not change between years. The film estimate stays the same for any 2006–2009 Entourage.

Questions about wrapping a Hyundai Entourage

How much vinyl does it take to wrap a Hyundai Entourage?

It takes about 79 ft (24 m) of 60-inch (1.52 m) cast film to wrap a Hyundai Entourage. If you choose chrome or patterned film, plan on about 90 ft (27.5 m). This is for the full five-door body of the first generation, including the tall roof.

Are the sliding doors of an Entourage wrapped?

The sliding doors of an Entourage are wrapped, but the door tracks stay bare. The film is cut along the tracks because the moving door would rub and lift the vinyl there. The rest of each door panel is covered like any other body panel.

Can I wrap only the hood or the roof of an Entourage?

You can wrap only the hood or the roof of an Entourage as a partial wrap. Mirror caps can also be done on their own. These partial jobs are smaller than a full wrap and use less film.

Is an Entourage hard to wrap?

An Entourage is not a simple wrap because it is a tall minivan with sliding doors. The long body at 202.0 in (5,130 mm) and the tall roof at 71.5 in (1,816 mm) mean more film and work from a platform. The sliding door tracks add careful cutting, and the roof cannot be wrapped from the ground.