Wraps by car

Hyundai Grand Santa Fe wrap

The Hyundai Grand Santa Fe wrap page covers the single generation of this large SUV produced from 2013 to 2018. A full vinyl wrap on the newest body takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases that to about 74 ft (22.5 m).

1generations20 mof film for a full wrap

Hyundai Grand Santa Fe, first generation, factory photo
Hyundai Grand Santa Fe, first generation. Factory color shown.

Hyundai Grand Santa Fe wrap colors and ideas

  • Grand Santa Fe black wrap
  • Grand Santa Fe white wrap
  • Grand Santa Fe gray wrap
  • Grand Santa Fe silver wrap
  • Grand Santa Fe red wrap
  • Grand Santa Fe blue wrap
  • Grand Santa Fe green wrap
  • Grand Santa Fe yellow wrap
  • Grand Santa Fe orange wrap
  • Grand Santa Fe purple wrap
  • Grand Santa Fe pink wrap
  • Grand Santa Fe teal wrap
  • Grand Santa Fe brown wrap
  • Grand Santa Fe gold wrap
  • Grand Santa Fe chrome wrap
  • Grand Santa Fe color shift wrap
  • Grand Santa Fe carbon fiber wrap
  • Grand Santa Fe camo and patterned wrap

How much vinyl to wrap a Hyundai Grand Santa Fe

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2013–2018SUV (5 doors)193.1 in (4,905 mm) to 193.5 in (4,915 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Grand Santa Fe wrap cost factors

Grand Santa Fe wrap cost depends on the film area, the film type and the preparation for the body. The vehicle is 193.1 in (4,905 mm) to 193.5 in (4,915 mm) long, so a full wrap needs about 66 ft (20 m) of cast film. Chrome or patterned film raises the amount to about 74 ft (22.5 m). The cameras, fog lamps and tailgate glass add cut-out work that also affects the final figure.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2016: bumpers and lights differ between the versions, and so do the film cuts.

Grand Santa Fe wraps by generation

Swipe sideways. Tap a card for the full description.

Hyundai Grand Santa Fe, first generation, factory photo
Factory color shown

2013–2018 Grand Santa Fe SUV (first generation)

2013–2018SUV (5 doors)193.1 in (4,905 mm) to 193.5 in (4,915 mm)

The first generation Grand Santa Fe ran from 2013 to 2018 with a restyling in 2016. The restyled version has different bumpers and lights, so film templates or pre-cut pieces from the earlier version will not fit. Wrap installers should check the production year before ordering film. The body length changed slightly across the years, from 193.1 in (4,905 mm) to 193.5 in (4,915 mm).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Grand Santa Fe

A partial wrap on the Grand Santa Fe can cover the roof, the hood or the mirror caps as separate jobs. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is often applied as a clear film on the front end. Each option uses less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Hyundai Grand Santa Fe: body, cut-outs and film

The Hyundai Grand Santa Fe vinyl wrap must cover a large five-door SUV body that measures from 193.1 in (4,905 mm) to 193.5 in (4,915 mm) long. The tall sides, long roof and broad hood mean the installer needs wide film and extra hands. The rear tailgate includes the glass, so the film stops at the glass edge. No other body style exists for this model.

Grand Santa Fe wrap ideas start around the standard cut-outs every color change requires. Every trim has cameras in the body, so the installer cuts the film around each lens. Every trim has fog lamps in the front bumper, which need cut-outs in the bumper film. The tailgate is a single panel with the rear glass in it.

How much vinyl to wrap a Grand Santa Fe depends on the film type and the version. The first generation was restyled in 2016 with new bumpers and lights, so film cut for one version does not fit the other. A full wrap uses about 66 ft (20 m) of cast film, or about 74 ft (22.5 m) if you choose chrome or patterned film. Buy a little extra for the cut-outs and the large panels.

Questions about wrapping a Hyundai Grand Santa Fe

How much vinyl does it take to wrap a Hyundai Grand Santa Fe?

A Hyundai Grand Santa Fe takes about 66 ft (20 m) of 60-inch (1.52 m) cast film for a full wrap. If you choose chrome or patterned film, the amount goes up to about 74 ft (22.5 m). These figures are for the newest body of the single generation.

Which years of the Grand Santa Fe take the same film cuts?

The 2013 to 2015 Grand Santa Fe models share one set of film cuts. The 2016 to 2018 models share another set because the restyling changed the bumpers and lights. Film cut for one version does not fit the other.

Can I wrap only the hood or the roof of a Grand Santa Fe?

Yes, you can wrap only the hood or only the roof of a Grand Santa Fe. A partial wrap can also be just the mirror caps. The film required is only for the chosen panel, not the full vehicle.

Is a Grand Santa Fe hard to wrap?

A Grand Santa Fe is not especially hard to wrap, but its size adds work. The body is 193.1 in (4,905 mm) to 193.5 in (4,915 mm) long, so panels are large. Every trim has cameras and fog lamps that need cut-outs, plus a tailgate with the glass integrated.