Wraps by car

Hyundai ix20 wrap

The Hyundai ix20 wrap page covers the single generation of this subcompact hatchback produced from 2009 to 2019. A full vinyl wrap of the newest body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. The film estimate changes to about 62 ft (19 m) if you choose chrome or patterned film.

1generations16 mof film for a full wrap

Hyundai ix20, first generation, factory photo
Hyundai ix20, first generation. Factory color shown.

Hyundai ix20 wrap colors and ideas

  • Hyundai ix20 black wrap
  • Hyundai ix20 white wrap
  • Hyundai ix20 gray wrap
  • Hyundai ix20 silver wrap
  • Hyundai ix20 red wrap
  • Hyundai ix20 blue wrap
  • Hyundai ix20 green wrap
  • Hyundai ix20 yellow wrap
  • Hyundai ix20 orange wrap
  • Hyundai ix20 purple wrap
  • Hyundai ix20 pink wrap
  • Hyundai ix20 teal wrap
  • Hyundai ix20 brown wrap
  • Hyundai ix20 gold wrap
  • Hyundai ix20 chrome wrap
  • Hyundai ix20 color shift wrap
  • Hyundai ix20 carbon fiber wrap
  • Hyundai ix20 camo and patterned wrap

How much vinyl to wrap a Hyundai ix20

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2009–2019hatchback (5 doors)161.4 in (4,100 mm) to 162.0 in (4,115 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Hyundai ix20 wrap cost factors

The Hyundai ix20 wrap cost depends on the film type and the coverage you select. A full wrap uses about 52 ft (16 m) of cast film, while chrome or patterned film calls for about 62 ft (19 m). Partial jobs like the roof or hood need less material than a full wrap. The amount of disassembly, such as removing trim around the tailgate, also influences the final cost.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2015: bumpers and lights differ between the versions, and so do the film cuts.

Hyundai ix20 wraps by generation

Swipe sideways. Tap a card for the full description.

Hyundai ix20, first generation, factory photo
Factory color shown

2009–2019 Hyundai ix20 hatchback (first generation)

2009–2019hatchback (5 doors)161.4 in (4,100 mm) to 162.0 in (4,115 mm)

The first generation of the Hyundai ix20 was built from 2009 to 2019 as a five-door hatchback. A restyling in 2015 changed the bumpers and lights, so film cut for one version does not fit the other. The body length ranges from 161.4 in (4,100 mm) to 162.0 in (4,115 mm). Its tailgate includes the rear glass, so the film ends at the edge of the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Hyundai ix20

A partial wrap on a Hyundai ix20 can cover the roof, hood, or mirror caps separately. A chrome delete covers the window trim and badges with black film instead of a full color change. Paint protection film (PPF) is another option: a clear film applied to the front end to guard against stone chips. All these jobs use less vinyl than a complete wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Hyundai ix20: body, cut-outs and film

The Hyundai ix20 vinyl wrap fits one body style: a five-door hatchback with a length of 161.4 in (4,100 mm) to 162.0 in (4,115 mm). This compact size keeps the wrap area modest for a whole vehicle. The tall roof and upright tailgate add vertical panels but no extra doors or complex curves.

For Hyundai ix20 wrap ideas, the main challenge is the tailgate with the rear glass in it, where the film ends at the edge of the glass. This makes the tailgate one large panel without a separate glass cut-out. You can choose a full color change wrap or break the job into the roof, hood, mirror caps, or a chrome delete on the window trim and badges.

To know how much vinyl to wrap a Hyundai ix20, note that only the first generation exists in the catalog, so there are no other body styles to compare. The 2015 restyling changed the bumpers and lights, which affects how film is cut for those areas. For film quantity, the hatchback body from 2009 to 2019 uses about 52 ft (16 m) of standard cast film.

Questions about wrapping a Hyundai ix20

How much vinyl does it take to wrap a Hyundai ix20?

Yes, a full Hyundai ix20 wrap takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. The amount is based on the newest body, which is the only generation available. If you choose chrome or patterned film, the estimate rises to about 62 ft (19 m).

Which years of the Hyundai ix20 take the same film cuts?

All years from 2009 to 2019 use the same main body panels, but the 2015 restyling changed bumpers and lights. A kit cut for a 2014 model will not fit those parts on a 2016 model. The roof, doors, and tailgate remain the same across the whole production run.

Can I wrap only the hood or the roof of a Hyundai ix20?

Yes, you can wrap only the hood or the roof of a Hyundai ix20. Mirror caps are another small partial wrap option. These jobs need much less film than a full wrap and let you change the look without covering the whole car.

Is a Hyundai ix20 hard to wrap?

The Hyundai ix20 is moderately hard to wrap because of its tailgate with the rear glass in it. The film ends at the edge of the glass, so you must trim precisely along that line. The body length of 161.4 in (4,100 mm) to 162.0 in (4,115 mm) is compact, which simplifies handling of large panels.