Wraps by car

Hyundai ix55 wrap

A Hyundai ix55 wrap covers the 2006–2013 SUV body with vinyl wrap film, and a full wrap of this first generation takes about 66 ft (20 m) of 60-inch (1.52 m) cast film.

1generations20 mof film for a full wrap

Hyundai ix55, first generation, factory photo
Hyundai ix55, first generation. Factory color shown.

Hyundai ix55 wrap colors and ideas

  • Hyundai ix55 black wrap
  • Hyundai ix55 white wrap
  • Hyundai ix55 gray wrap
  • Hyundai ix55 silver wrap
  • Hyundai ix55 red wrap
  • Hyundai ix55 blue wrap
  • Hyundai ix55 green wrap
  • Hyundai ix55 yellow wrap
  • Hyundai ix55 orange wrap
  • Hyundai ix55 purple wrap
  • Hyundai ix55 pink wrap
  • Hyundai ix55 teal wrap
  • Hyundai ix55 brown wrap
  • Hyundai ix55 gold wrap
  • Hyundai ix55 chrome wrap
  • Hyundai ix55 color shift wrap
  • Hyundai ix55 carbon fiber wrap
  • Hyundai ix55 camo and patterned wrap

How much vinyl to wrap a Hyundai ix55

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2013SUV (5 doors)190.6 in (4,840 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Hyundai ix55 wrap cost factors

The Hyundai ix55 wrap cost depends on the film type, the body areas covered, and the installer's labor. A full wrap uses about 66 ft (20 m) of 60-inch (1.52 m) cast film, while chrome or patterned film needs about 76 ft (23 m). The tall roof requires platform work and extra time.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • A tall body (68.9 in (1,750 mm)): the roof is wrapped from a platform.

Hyundai ix55 wraps by generation

Swipe sideways. Tap a card for the full description.

Hyundai ix55, first generation, factory photo
Factory color shown

2006–2013 Hyundai ix55 SUV (first generation)

2006–2013SUV (5 doors)190.6 in (4,840 mm)

The first generation Hyundai ix55 stands 68.9 in (1,750 mm) tall, so the roof is wrapped from a platform and takes more time. This height also affects how the installer reaches the upper edges of the doors and tailgate. The body's upright panels make the sides easier to wrap than the roof.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (68.9 in (1,750 mm)): the roof is wrapped from a platform.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Hyundai ix55

A partial wrap on a Hyundai ix55 can cover the roof, hood, and mirror caps. Chrome delete involves covering the window trim and badges with black film. Paint protection film (PPF) is applied as clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Hyundai ix55: body, cut-outs and film

The Hyundai ix55 is a tall five-door SUV, and its height of 68.9 in (1,750 mm) means the roof is wrapped from a platform. At 190.6 in (4,840 mm) long, the body needs careful film planning, especially around the large rear areas. Its upright sides and tailgate are straightforward panels, but the roof and bumpers add time.

The tailgate contains the rear glass, so the vinyl film ends at the edge of the glass. Parking sensors in both bumpers require cut-outs around each sensor, and fog lamps in the front bumper need openings in the film. On trims with a sunroof, the roof film is cut around its opening.

The Hyundai ix55 has one generation in this catalog, from 2006 to 2013, so film estimates remain consistent. The key figure for how much vinyl to wrap a Hyundai ix55 is about 66 ft (20 m) of 60-inch (1.52 m) cast film. The roof height and bumper sensors affect how the film is cut and installed.

Questions about wrapping a Hyundai ix55

How much vinyl does it take to wrap a Hyundai ix55?

A Hyundai ix55 wrap takes about 66 ft (20 m) of 60-inch (1.52 m) cast film for a full body. For chrome or patterned film, expect about 76 ft (23 m).

Can the roof of a Hyundai ix55 be wrapped?

Yes, the roof of a Hyundai ix55 can be wrapped, but the installer needs a platform because the body is 68.9 in (1,750 mm) tall. On trims with a sunroof, the film is cut around its opening.

Can I wrap only the hood or the roof of a Hyundai ix55?

Yes, you can wrap only the hood or the roof of a Hyundai ix55 as a partial wrap. Other common partial jobs include mirror caps, chrome delete on window trim and badges, and paint protection film on the front end.

Is a Hyundai ix55 hard to wrap?

The Hyundai ix55 is not especially hard to wrap, but its height of 68.9 in (1,750 mm) requires a platform for the roof. Parking sensors in both bumpers and fog lamps in the front bumper need film cut-outs, which adds care and time.