Wraps by car

Hyundai Lantra wrap

The Hyundai Lantra wrap page covers the compact sedan and wagon built from 1990 to 2001 across two generations. A full wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for the sedan and about 52 ft (16 m) for the wagon. The film estimate gives a starting point for planning a color change wrap or paint protection film.

2generations15 mof film for a full wrap

Hyundai Lantra, second generation, factory photo
Hyundai Lantra, second generation. Factory color shown.

Hyundai Lantra wrap colors and ideas

  • Lantra black wrap
  • Lantra white wrap
  • Lantra gray wrap
  • Lantra silver wrap
  • Lantra red wrap
  • Lantra blue wrap
  • Lantra green wrap
  • Lantra yellow wrap
  • Lantra orange wrap
  • Lantra purple wrap
  • Lantra pink wrap
  • Lantra teal wrap
  • Lantra brown wrap
  • Lantra gold wrap
  • Lantra chrome wrap
  • Lantra color shift wrap
  • Lantra carbon fiber wrap
  • Lantra camo and patterned wrap

How much vinyl to wrap a Hyundai Lantra

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1995–2001sedan, wagon (4 or 5 doors)174.0 in (4,420 mm) to 175.6 in (4,460 mm)about 49 ft (15 m) for the sedan to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m)
1990–1995sedan (4 doors)172.2 in (4,375 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Lantra wrap cost factors

The Lantra wrap cost depends on the body style, the film type, and the condition of the panels. A wagon uses more film than a sedan, and chrome or patterned film adds waste because the pattern must be matched. The two generations also differ in length by up to 3.4 inches, which changes how much film is used on the rockers and bumpers.

  • Film for a full wrap: about 49 ft (15 m) for the sedan to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 1998: bumpers and lights differ between the versions, and so do the film cuts.

Lantra wraps by generation

Swipe sideways. Tap a card for the full description.

Hyundai Lantra, second generation, factory photo
Factory color shown

1995–2001 Lantra sedan, wagon (second generation)

1995–2001sedan, wagon (4 or 5 doors)174.0 in (4,420 mm) to 175.6 in (4,460 mm)

The second generation Hyundai Lantra ran from 1995 to 2001 and was restyled in 1998. The restyling changed the bumpers and lights, so film cut for one version does not fit the other. When buying pre-cut pieces or reusing templates, the year of the car matters even within this generation.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) for the sedan to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).

Hyundai Lantra, first generation, factory photo
Factory color shown

1990–1995 Lantra sedan (first generation)

1990–1995sedan (4 doors)172.2 in (4,375 mm)

The first generation Hyundai Lantra was built from 1990 to 1995 as a four-door sedan. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. The installer checks adhesion on each panel because old paint can lift when the film is removed.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Lantra

A partial wrap on the Hyundai Lantra can cover the roof, hood, or mirror caps instead of the whole car. Lantra chrome delete covers the window trim and badges with black film for a darker look. Paint protection film is another option, with clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Hyundai Lantra: body, cut-outs and film

The Hyundai Lantra vinyl wrap must be planned around the compact body styles of the two generations. The sedan lengths run from 172.2 in (4,375 mm) on the first generation to 175.6 in (4,460 mm) on the restyled second generation, while the wagon is slightly longer still. These differences mean film is cut to the exact version rather than shared between all Lantra bodies.

Lantra wrap ideas start with the parts that need cut-outs or come off during installation. On the second generation wagon, the tailgate holds the rear glass, so the film ends at the edge of the glass. Door handles, mirrors, and badges are removed or masked for clean edges on every Lantra body style.

How much vinyl to wrap a Lantra depends on the generation and body style you have. The first generation sedan, built from 1990 to 1995, needs about 49 ft (15 m) of 60-inch (1.52 m) cast film, while the second generation sedan from 1995 to 2001 uses the same amount before the 1998 restyling. The wagon takes more film, about 52 ft (16 m), because of its taller rear section and tailgate.

Questions about wrapping a Hyundai Lantra

How much vinyl does it take to wrap a Hyundai Lantra?

A Hyundai Lantra wrap takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for the newest sedan body, and about 52 ft (16 m) for the wagon. The exact amount depends on the body style, waste from matching patterns, and how many pieces are cut from one roll.

Which years of the Lantra take the same film cuts?

The same film cuts fit the first generation from 1990 to 1995, and the second generation from 1995 to 1998 for cars before the restyling. The restyled second generation from 1998 to 2001 has different bumpers and lights, so its cuts do not match the earlier cars.

Which Lantra body takes more film?

The Lantra wagon takes more film than the sedan. The wagon needs about 52 ft (16 m) of cast film, while the sedan needs about 49 ft (15 m). The wagon's longer body and tailgate account for the extra material.

Can I wrap only the hood or the roof of a Lantra?

Yes, you can wrap only the hood or the roof of a Lantra. A partial wrap on the roof, hood, or mirror caps is a smaller job than a full color change wrap. Paint protection film on the front end is another option that covers less than the whole car.