Wraps by car

Hyundai Santamo wrap

The Hyundai Santamo wrap page covers the first-generation minivan built from 1995 to 2002. The catalog lists one generation with a five-door van body. A full vinyl wrap of the newest body takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 74 ft (22.5 m) for the same body.

1generations19.5 mof film for a full wrap

Hyundai Santamo, first generation, factory photo
Hyundai Santamo, first generation. Factory color shown.

Hyundai Santamo wrap colors and ideas

  • Santamo black wrap
  • Santamo white wrap
  • Santamo gray wrap
  • Santamo silver wrap
  • Santamo red wrap
  • Santamo blue wrap
  • Santamo green wrap
  • Santamo yellow wrap
  • Santamo orange wrap
  • Santamo purple wrap
  • Santamo pink wrap
  • Santamo teal wrap
  • Santamo brown wrap
  • Santamo gold wrap
  • Santamo chrome wrap
  • Santamo color shift wrap
  • Santamo carbon fiber wrap
  • Santamo camo and patterned wrap

How much vinyl to wrap a Hyundai Santamo

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1995–2002van (5 doors)177.8 in (4,515 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Santamo wrap cost factors

Santamo wrap cost is driven by the size of the van and the film type. The body needs about 64 ft (19.5 m) of standard cast film or about 74 ft (22.5 m) of chrome or patterned film. The installer's time also depends on cutting around the sliding door tracks and removing trim. A partial wrap or chrome delete uses less film and less labor.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Santamo wraps by generation

Swipe sideways. Tap a card for the full description.

Hyundai Santamo, first generation, factory photo
Factory color shown

1995–2002 Santamo van (first generation)

1995–2002van (5 doors)177.8 in (4,515 mm)

The first generation Hyundai Santamo from 1995 to 2002 has sliding side doors. The door tracks stay bare, and the film is cut along them. This leaves a visible gap that is part of the original look. Installers must plan the cuts around the tracks on both sides.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Santamo

A Hyundai Santamo can also get a partial wrap on the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is another option for the front end. These smaller jobs use less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Hyundai Santamo: body, cut-outs and film

The Hyundai Santamo vinyl wrap covers a single five-door van body that measures 177.8 in (4,515 mm) long. Its tall, boxy sides and flat panels make film application straightforward for an installer. The size means a full wrap uses more film than a small hatchback. The rear hatch and sliding doors add large, mostly flat surfaces to cover.

Santamo wrap ideas start with the sliding side doors. Their tracks stay bare, so the film is cut along them. The door handles, mirrors, and badges also need cut-outs or removal. The roof rails and window trim are separate pieces that can be wrapped or left exposed.

How much vinyl to wrap a Santamo depends on the single generation listed from 1995 to 2002. With only this body in the catalog, the estimate does not change between years. A full wrap of the van needs about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. Choosing chrome or patterned film raises the amount to about 74 ft (22.5 m).

Questions about wrapping a Hyundai Santamo

How much vinyl does it take to wrap a Hyundai Santamo?

It takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film to wrap a Hyundai Santamo. That figure covers the full body of the one generation in the catalog. If the film is chrome or patterned, the amount rises to about 74 ft (22.5 m).

Are the sliding doors of a Santamo wrapped?

No, the sliding doors of a Santamo are not fully wrapped. The door tracks stay bare, so the film is cut along them. The rest of the door panel can be covered. This leaves the track exposed for the door to slide.

Can I wrap only the hood or the roof of a Santamo?

Yes, you can wrap only the hood or the roof of a Santamo. Partial wrap options include the roof, hood, and mirror caps. A chrome delete on the window trim and badges is another choice. Paint protection film on the front end is also available.

Is a Santamo hard to wrap?

The Santamo is not especially hard to wrap, but its size and sliding doors add work. The van measures 177.8 in (4,515 mm) long, so the installer handles large panels. The sliding door tracks must stay bare, which means careful cuts along them. The tall roof also requires a ladder or platform.