Wraps by car

Hyundai Scoupe wrap

This page covers a vinyl wrap for the Hyundai Scoupe, a compact coupe produced from 1988 to 1996. The catalog includes one generation of this car. A full wrap of the newest body takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film.

1generations13.5 mof film for a full wrap

Hyundai Scoupe, first generation, factory photo
Hyundai Scoupe, first generation. Factory color shown.

Hyundai Scoupe wrap colors and ideas

  • Scoupe black wrap
  • Scoupe white wrap
  • Scoupe gray wrap
  • Scoupe silver wrap
  • Scoupe red wrap
  • Scoupe blue wrap
  • Scoupe green wrap
  • Scoupe yellow wrap
  • Scoupe orange wrap
  • Scoupe purple wrap
  • Scoupe pink wrap
  • Scoupe teal wrap
  • Scoupe brown wrap
  • Scoupe gold wrap
  • Scoupe chrome wrap
  • Scoupe color shift wrap
  • Scoupe carbon fiber wrap
  • Scoupe camo and patterned wrap

How much vinyl to wrap a Hyundai Scoupe

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1988–1996coupe (2 doors)165.9 in (4,215 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)

Scoupe wrap cost factors

Scoupe wrap cost depends on the film type, the amount of labor, and the condition of the 1988–1996 body panels. A standard color change uses about 44 ft (13.5 m) of film, while chrome or patterned film needs about 51 ft (15.5 m). Any repairs to old paint or rust will add preparation time.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Scoupe wraps by generation

Swipe sideways. Tap a card for the full description.

Hyundai Scoupe, first generation, factory photo
Factory color shown

1988–1996 Scoupe coupe (first generation)

1988–1996coupe (2 doors)165.9 in (4,215 mm)

The first generation Hyundai Scoupe, built from 1988 to 1996, often has paint of varying age and condition. Some panels may be original while others have been repainted over the years. A test spot before a full wrap checks how the film adheres to each surface.

Two long side doors: each door is one large piece of film.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Scoupe

A partial wrap for the Scoupe can cover the roof, hood, or mirror caps. Scoupe chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Hyundai Scoupe: body, cut-outs and film

A Hyundai Scoupe vinyl wrap suits a single two-door coupe body style with a length of 165.9 in (4,215 mm). The car has no separate trunk lid, so the rear area wraps as one continuous panel. The compact size keeps the total film needed lower than for a larger coupe.

Scoupe wrap ideas start with the two long side doors, each wrapped as one large piece. The door handles, mirrors, and badges need cut-outs or removal for a clean install. The bumpers and rocker panels can be wrapped in a contrasting color.

For how much vinyl to wrap a Scoupe, plan on about 44 ft (13.5 m) of 60-inch (1.52 m) film for a standard color change. If you choose chrome or patterned film, the estimate rises to about 51 ft (15.5 m). The single generation keeps the numbers consistent across all years.

Questions about wrapping a Hyundai Scoupe

How much vinyl does it take to wrap a Hyundai Scoupe?

A Hyundai Scoupe takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film for a full wrap. That figure applies to a standard color change on the first-generation body. Chrome or patterned film raises the total to about 51 ft (15.5 m).

Can I wrap only the hood or the roof of a Scoupe?

Yes, you can wrap only the hood or the roof of a Scoupe. Partial wraps on this car also cover mirror caps. A chrome delete for the window trim and badges is another smaller job.

Is a Scoupe hard to wrap?

A Scoupe is not especially hard to wrap, but its two long side doors need care because each is one large piece of film. The 165.9 in (4,215 mm) length means handling big sheets on a compact car. Door handles, mirrors, and badges require cut-outs or removal.

How many generations of the Scoupe does this page cover?

This page covers one generation of the Scoupe. The first generation was produced from 1988 to 1996. All film estimates on this page are for that body.