Wraps by car

Hyundai Stellar wrap

The Hyundai Stellar wrap page covers the first generation of the mid-size Hyundai Stellar, produced from 1983 to 1993. A full vinyl wrap of this sedan needs about 49 ft (15 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan on about 61 ft (18.5 m).

1generations15 mof film for a full wrap

Hyundai Stellar, first generation, factory photo
Hyundai Stellar, first generation. Factory color shown.

Hyundai Stellar wrap colors and ideas

  • Stellar black wrap
  • Stellar white wrap
  • Stellar gray wrap
  • Stellar silver wrap
  • Stellar red wrap
  • Stellar blue wrap
  • Stellar green wrap
  • Stellar yellow wrap
  • Stellar orange wrap
  • Stellar purple wrap
  • Stellar pink wrap
  • Stellar teal wrap
  • Stellar brown wrap
  • Stellar gold wrap
  • Stellar chrome wrap
  • Stellar color shift wrap
  • Stellar carbon fiber wrap
  • Stellar camo and patterned wrap

How much vinyl to wrap a Hyundai Stellar

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1983–1993sedan (4 doors)173.8 in (4,415 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Stellar wrap cost factors

Stellar wrap cost depends on the size of the car, the film type, and the condition of the paint. The Stellar needs about 49 ft (15 m) of cast film, or about 61 ft (18.5 m) for chrome or patterned film. More film means more material and labour time. Paint condition can add prep work if the surface is not smooth.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: sedan (4 doors).

Stellar wraps by generation

Swipe sideways. Tap a card for the full description.

Hyundai Stellar, first generation, factory photo
Factory color shown

1983–1993 Stellar sedan (first generation)

1983–1993sedan (4 doors)173.8 in (4,415 mm)

The first generation Hyundai Stellar was built from 1983 to 1993 as a four-door mid-size sedan. Paint age on a car of these years is a key factor: panels may be original or repainted. A test spot comes before a full wrap to check that the film will stick and remove cleanly. The car's 173.8 in (4,415 mm) length sets the amount of film for a full wrap.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Stellar

A partial wrap on a Hyundai Stellar can cover the roof, hood, or mirror caps. Stellar chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can be done on one panel at a time.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Hyundai Stellar: body, cut-outs and film

The Hyundai Stellar vinyl wrap is shaped by the car's single sedan body style with four doors. Its mid-size dimensions, 173.8 in (4,415 mm) long, set the amount of film needed for the panels. The four doors and sedan roofline mean more film on the sides than on a coupe. Installers use the length to plan cuts and seams.

For Stellar wrap ideas, note that the door handles, mirrors, and bumpers may need to be removed or wrapped separately. Window trims and badges require cut-outs or removal for a clean chrome delete. The front grille area often needs relief cuts to fit the film without lifting. Older window seals may need masking before the wrap.

How much vinyl to wrap a Stellar depends on the body style, but this page covers only the first generation sedan. The film estimate of 49 ft (15 m) applies to that single body. There are no other generations in the catalog to compare with, so the figure stays the same for every year from 1983 to 1993.

Questions about wrapping a Hyundai Stellar

How much vinyl does it take to wrap a Hyundai Stellar?

A Hyundai Stellar takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full wrap. For chrome or patterned film, the amount is about 61 ft (18.5 m). The sedan body with four doors determines this figure.

Can I wrap only the hood or the roof of a Stellar?

Yes, you can wrap only the hood or the roof of a Stellar. A partial wrap can also cover the mirror caps. For the roof and hood, the installer will need enough film to cover each panel with some excess for trimming.

Is a Stellar hard to wrap?

A Stellar is not the easiest car to wrap because of its age and the need to remove or work around door handles, mirrors, and bumpers. The window trims and badges must be cut out or removed for a clean finish. The mid-size body at 173.8 in (4,415 mm) long adds more surface area than a smaller car.

How many generations of the Stellar does this page cover?

This page covers one generation of the Hyundai Stellar, the first generation produced from 1983 to 1993. The car was available only as a four-door sedan in that generation.