Wraps by car

Hyundai Tiburon wrap

The Hyundai Tiburon wrap page covers this two-generation coupe and the vinyl wrap film it needs. A full wrap of the second generation takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises that to about 54 ft (16.5 m). The first generation uses slightly less cast film, at about 46 ft (14 m).

2generations14.5 mof film for a full wrap

Hyundai Tiburon, second generation, factory photo
Hyundai Tiburon, second generation. Factory color shown.

Hyundai Tiburon wrap colors and ideas

  • Tiburon black wrap
  • Tiburon white wrap
  • Tiburon gray wrap
  • Tiburon silver wrap
  • Tiburon red wrap
  • Tiburon blue wrap
  • Tiburon green wrap
  • Tiburon yellow wrap
  • Tiburon orange wrap
  • Tiburon purple wrap
  • Tiburon pink wrap
  • Tiburon teal wrap
  • Tiburon brown wrap
  • Tiburon gold wrap
  • Tiburon chrome wrap
  • Tiburon color shift wrap
  • Tiburon carbon fiber wrap
  • Tiburon camo and patterned wrap

How much vinyl to wrap a Hyundai Tiburon

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2002–2009coupe (2 doors)173.2 in (4,399 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)
1996–2001coupe (2 doors)170.9 in (4,341 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Tiburon wrap cost factors

The Tiburon wrap cost depends on the film type and the generation of the car. A full wrap of the second generation uses about 48 ft (14.5 m) of cast film, while chrome or patterned film raises that to about 54 ft (16.5 m). The first generation takes about 46 ft (14 m) of cast film. Extra labor for the long doors and any cut-outs also affects the total.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.
  • Restyled in 2005: bumpers and lights differ between the versions, and so do the film cuts.

Tiburon wraps by generation

Swipe sideways. Tap a card for the full description.

Hyundai Tiburon, second generation, factory photo
Factory color shown

2002–2009 Tiburon coupe (second generation)

2002–2009coupe (2 doors)173.2 in (4,399 mm)

The second generation Hyundai Tiburon was restyled in 2005, and the bumpers and lights changed enough that film cut for one version does not fit the other. The coupe body remained two doors with a length of 173.2 in (4,399 mm). When ordering a kit, the production year before or after 2005 determines the correct pattern. A shop can also trim on the car for an exact fit.

Two long side doors: each door is one large piece of film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Hyundai Tiburon, first generation, factory photo
Factory color shown

1996–2001 Tiburon coupe (first generation)

1996–2001coupe (2 doors)170.9 in (4,341 mm)

The first generation Hyundai Tiburon, built from 1996 to 2001, often has paint age issues: panels may be original or repainted, so a test spot comes before a full wrap. The film estimate is about 46 ft (14 m) of 60-inch (1.52 m) cast film. A restyling in 1999 changed small trim details, but the main panels stayed the same. Inspect each panel for adhesion problems before wrapping.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Tiburon

A partial wrap on a Tiburon can cover the roof, hood, or mirror caps with a color change film. For a chrome delete, the window trim and badges are wrapped in black film to cover the bright parts. Paint protection film (PPF) is clear film applied to the front end to shield it from stone chips. These smaller jobs use less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Hyundai Tiburon: body, cut-outs and film

The Hyundai Tiburon vinyl wrap fits a coupe body with two long doors that make each door a single large piece of film. The second generation measures 173.2 in (4,399 mm) long, while the first generation is 170.9 in (4,341 mm). The narrow size means a wrap uses less film than a larger sedan. Long door panels require careful stretching to avoid lifting at the edges.

Tiburon wrap ideas include design cuts around the two long doors, since each door is one large vinyl piece. The coupe's short roof and trunk lid are also straightforward panels. For a clean install, plan seams where the body lines meet, not across the door middle. Removing the side mirrors and door handles gives a neater finish.

When counting how much vinyl to wrap a Tiburon, note the generation difference: the second generation needs about 48 ft (14.5 m) and the first about 46 ft (14 m) of 60-inch (1.52 m) cast film. Both bodies are two-door coupes with similar panel shapes. The 2005 restyling changed the bumpers and lights of the second generation, so film for one version does not fit the other. The first generation had a restyling in 1999 with subtle trim changes.

Questions about wrapping a Hyundai Tiburon

How much vinyl does it take to wrap a Hyundai Tiburon?

It takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film to wrap a Hyundai Tiburon of the second generation. The first generation takes about 46 ft (14 m). For chrome or patterned film, the estimate rises to about 54 ft (16.5 m) for both generations.

Which years of the Tiburon take the same film cuts?

The Tiburon years from 2002 to 2004 take the same film cuts, and the years 2005 to 2009 take their own cuts because of the restyling. For the first generation, 1996 to 1998 share cuts, and 1999 to 2001 share cuts after a smaller restyling.

Can I wrap only the hood or the roof of a Tiburon?

Yes, you can wrap only the hood or the roof of a Tiburon as a partial wrap. Mirror caps are another small job, and a chrome delete covers the window trim and badges. Paint protection film (PPF) on the front end is also a partial option.

Is a Tiburon hard to wrap?

A Tiburon is not especially hard to wrap, but the two long side doors add work because each door is one large piece of film. The coupe's length of 173.2 in (4,399 mm) for the second generation means careful handling of the long panels. Removing mirrors and handles helps achieve a clean finish.