Wraps by car

Koenigsegg Agera R wrap

The Koenigsegg Agera R wrap page covers the first-generation Agera R, produced from 2011 to 2014. This catalog entry focuses on the coupe body style with two doors. A full vinyl wrap of the newest body takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. The page provides details on film amounts, wrap ideas, and cost factors.

1generations13.5 mof film for a full wrap

Koenigsegg Agera R, first generation, factory photo
Koenigsegg Agera R, first generation. Factory color shown.

Koenigsegg Agera R wrap colors and ideas

  • Agera R black wrap
  • Agera R white wrap
  • Agera R gray wrap
  • Agera R silver wrap
  • Agera R red wrap
  • Agera R blue wrap
  • Agera R green wrap
  • Agera R yellow wrap
  • Agera R orange wrap
  • Agera R purple wrap
  • Agera R pink wrap
  • Agera R teal wrap
  • Agera R brown wrap
  • Agera R gold wrap
  • Agera R chrome wrap
  • Agera R color shift wrap
  • Agera R carbon fiber wrap
  • Agera R camo and patterned wrap

How much vinyl to wrap a Koenigsegg Agera R

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2011–2014coupe (2 doors)169.0 in (4,293 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Agera R wrap cost factors

The Agera R wrap cost depends on the amount of film, the film type, and the labor for the body's details. A standard color change wrap uses about 44 ft (13.5 m) of cast film, while chrome or patterned film requires about 56 ft (17 m). The two long side doors are large single pieces that need careful handling, and the cameras require precise cut-outs. Any paint age issues, such as original or repainted panels, may need extra preparation.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.
  • Every trim has cameras in the body: the film is cut around each lens.

Agera R wraps by generation

Swipe sideways. Tap a card for the full description.

Koenigsegg Agera R, first generation, factory photo
Factory color shown

2011–2014 Agera R coupe (first generation)

2011–2014coupe (2 doors)169.0 in (4,293 mm)

The first generation of the Koenigsegg Agera R ran from 2011 to 2014 as a two-door coupe. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. The body is 169.0 in (4,293 mm) long, which determines how the film is cut and laid. Use about 44 ft (13.5 m) of 60-inch (1.52 m) cast film for a full wrap.

Two long side doors: each door is one large piece of film.

Every trim has cameras in the body: the film is cut around each lens.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on an Agera R

Smaller jobs on an Agera R include a partial wrap of the roof, hood, or mirror caps. An Agera R chrome delete covers window trim and badges with black film for a different look. Paint protection film (PPF) is applied as clear film on the front end to guard against stone chips. These options let you change specific areas without wrapping the entire car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Koenigsegg Agera R: body, cut-outs and film

The Koenigsegg Agera R vinyl wrap must fit a coupe body that is 169.0 in (4,293 mm) long. Its two long side doors are each one large piece of film, which helps create a clean appearance. The low sports car body presents fewer flat areas than a sedan, so the film is worked carefully around curves. Every trim has cameras in the body, so the film is cut around each lens.

Agera R wrap ideas include covering the two long side doors with large film pieces. The cameras in the body require cut-outs that are hidden by aligning the film precisely. Because the door length is unusual, installers often use a cast film that can be stretched without distortion. The side mirrors and roof can be wrapped separately to change the look without doing the entire car.

When you calculate how much vinyl to wrap an Agera R, plan for about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, order about 56 ft (17 m) because pattern matching and extra trimming consume more material. The first-generation body is the only generation in this catalog, so these figures apply to all Agera R models from 2011 to 2014. The large side doors and the low roof area use most of the film.

Questions about wrapping a Koenigsegg Agera R

How much vinyl does it take to wrap a Koenigsegg Agera R?

It takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film to wrap a Koenigsegg Agera R. This figure is for the newest body of the first generation, produced from 2011 to 2014. If you use chrome or patterned film, you will need about 56 ft (17 m) because of pattern matching and trimming.

Can I wrap only the hood or the roof of an Agera R?

Yes, you can wrap only the hood or the roof of an Agera R. The partial wrap options for this car include the roof, hood, and mirror caps. A chrome delete on the window trim and badges is another focused job. These smaller wraps change the look without covering the whole body.

Is an Agera R hard to wrap?

Yes, an Agera R is hard to wrap because of its large side doors and built-in cameras. The two long doors each require one large piece of film, which demands careful stretching and positioning. The cameras in the body mean the film must be cut around each lens precisely. The car's length of 169.0 in (4,293 mm) adds more area to cover with consistent tension.

How many generations of the Agera R does this page cover?

This page covers one generation of the Agera R. The first generation was produced from 2011 to 2014 as a coupe with two doors. All wrap data and film estimates on this page refer to that single generation.