Wraps by car

Koenigsegg Agera wrap

The Koenigsegg Agera wrap page covers the first generation built from 2011 to 2018. This generation appears once in the catalog. A full vinyl wrap of the newest body takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film.

1generations12.5 mof film for a full wrap

Koenigsegg Agera, first generation, factory photo
Koenigsegg Agera, first generation. Factory color shown.

Koenigsegg Agera wrap colors and ideas

  • Agera black wrap
  • Agera white wrap
  • Agera gray wrap
  • Agera silver wrap
  • Agera red wrap
  • Agera blue wrap
  • Agera green wrap
  • Agera yellow wrap
  • Agera orange wrap
  • Agera purple wrap
  • Agera pink wrap
  • Agera teal wrap
  • Agera brown wrap
  • Agera gold wrap
  • Agera chrome wrap
  • Agera color shift wrap
  • Agera carbon fiber wrap
  • Agera camo and patterned wrap

How much vinyl to wrap a Koenigsegg Agera

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2011–2018targa (2 doors)169.0 in (4,293 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Agera wrap cost factors

Agera wrap cost depends on the film choice, the condition of the paint, and the amount of disassembly. The standard estimate is about 41 ft (12.5 m) of 60-inch cast film, or about 54 ft (16.5 m) for chrome or patterned film. More complex film or a folding hard top adds labor, and damaged paint must be corrected before the wrap.

  • Film for a full wrap: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: targa (2 doors).
  • Targa body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Agera wraps by generation

Swipe sideways. Tap a card for the full description.

Koenigsegg Agera, first generation, factory photo
Factory color shown

2011–2018 Agera targa (first generation)

2011–2018targa (2 doors)169.0 in (4,293 mm)

On the first generation Koenigsegg Agera the open top is left unwrapped if it is fabric, and the film ends where the top begins. A folding hard top is wrapped as panels of its own, so the seams follow the panel lines. The targa design keeps the wrap off the roof mechanism, which reduces risk during installation.

Targa body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on an Agera

A partial wrap on an Agera can cover the hood, mirror caps, or rear deck. Agera chrome delete covers the window trim and badges with black film. Paint protection film (PPF) as a clear film on the front end is a common choice for track use.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Koenigsegg Agera: body, cut-outs and film

The Koenigsegg Agera vinyl wrap suits a targa body with two doors. The car is 169.0 in (4,293 mm) long, so the size stays manageable for one installer with a helper. A targa roof means the film ends where the removable top begins, so the layout is simpler than on a fixed roof.

Agera wrap ideas should account for a fabric top that is not wrapped and film ending where it begins. A folding hard top is wrapped as panels of its own, which adds small seams. The side intakes and rear wing need careful inlays, and the badges come off for a clean finish.

To figure how much vinyl to wrap an Agera, use about 41 ft (12.5 m) of standard cast film for the first generation. A chrome or patterned film needs about 54 ft (16.5 m) because the pattern must be matched. Between the years 2011 and 2018 the body stayed the same, so the estimate holds across the generation.

Questions about wrapping a Koenigsegg Agera

How much vinyl does it take to wrap a Koenigsegg Agera?

A Koenigsegg Agera takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film for a full wrap. That estimate covers the first generation body from 2011 to 2018. A chrome or patterned film needs about 54 ft (16.5 m) to match the pattern.

Is the top of an Agera wrapped?

No, the open top of an Agera is not wrapped if it is fabric. The film ends where the top begins. A folding hard top is wrapped as panels of its own.

Can I wrap only the hood or the roof of an Agera?

Yes, you can wrap only the hood or the rear deck of an Agera. A partial wrap on this car often covers the hood, mirror caps, or rear deck. The roof is not wrapped on a targa body because the removable top is left unwrapped.

Is an Agera hard to wrap?

Yes, an Agera is hard to wrap because of its targa top and complex body lines. The fabric top is not wrapped, so the film must end cleanly where the top begins. The size of 169.0 in (4,293 mm) and the side intakes add work compared to a simpler coupe.