Wraps by car

Koenigsegg One:1 wrap

The Koenigsegg One:1 wrap page covers the single-generation coupe produced in 2014. A full vinyl wrap of this car takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, the estimate rises to about 57 ft (17.5 m).

1generations14 mof film for a full wrap

Koenigsegg One:1, first generation, factory photo
Koenigsegg One:1, first generation. Factory color shown.

Koenigsegg One:1 wrap colors and ideas

  • One:1 black wrap
  • One:1 white wrap
  • One:1 gray wrap
  • One:1 silver wrap
  • One:1 red wrap
  • One:1 blue wrap
  • One:1 green wrap
  • One:1 yellow wrap
  • One:1 orange wrap
  • One:1 purple wrap
  • One:1 pink wrap
  • One:1 teal wrap
  • One:1 brown wrap
  • One:1 gold wrap
  • One:1 chrome wrap
  • One:1 color shift wrap
  • One:1 carbon fiber wrap
  • One:1 camo and patterned wrap

How much vinyl to wrap a Koenigsegg One:1

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–2014coupe (2 doors)177.2 in (4,500 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

One:1 wrap cost factors

One:1 wrap cost depends on film choice, coverage, and labor for this 177.2 in (4,500 mm) coupe. A full wrap in standard cast film uses about 46 ft (14 m), while chrome or patterned film needs about 57 ft (17.5 m). The two long side doors and camera cut-outs add installation time. Partial wraps and paint protection film (PPF) on the front end are smaller jobs with lower material needs.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.
  • Every trim has cameras in the body: the film is cut around each lens.

One:1 wraps by generation

Swipe sideways. Tap a card for the full description.

Koenigsegg One:1, first generation, factory photo
Factory color shown

2014–2014 One:1 coupe (first generation)

2014–2014coupe (2 doors)177.2 in (4,500 mm)

The first-generation Koenigsegg One:1, built in 2014, is a 177.2 in (4,500 mm) two-door coupe. Its length and low roofline create large side and roof panels, so a full wrap uses about 46 ft (14 m) of film. The two long doors are each one large piece, while the body cameras require precise cut-outs.

Two long side doors: each door is one large piece of film.

Every trim has cameras in the body: the film is cut around each lens.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on an One:1

Partial wrap options for the One:1 include the roof, hood, or mirror caps in a contrasting film. A chrome delete covers the window trim and badges with black film for a cleaner look. Paint protection film (PPF) can be applied as clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Koenigsegg One:1: body, cut-outs and film

The Koenigsegg One:1 vinyl wrap is shaped by its 177.2 in (4,500 mm) length and two-door coupe body. The long sides and low roof create large uninterrupted panels that use film efficiently. Two long side doors form a single large piece each, so seams can be kept minimal. Installers plan the layout to work with the car's curves and air intakes.

One:1 wrap ideas include full color changes and partial accents on the roof, hood, or mirror caps. Every trim has cameras in the body, so the film is cut around each lens. The two long side doors are each wrapped as one large piece of film. For a subtle change, a chrome delete covers the window trim and badges with black film.

How much vinyl to wrap an One:1 depends on the film type, because the generation ran only in 2014. A standard cast film wrap uses about 46 ft (14 m) of 60-inch (1.52 m) material. Chrome or patterned film requires about 57 ft (17.5 m) due to pattern matching and less stretch. The single body style means the estimate is consistent across all cars.

Questions about wrapping a Koenigsegg One:1

How much vinyl does it take to wrap a Koenigsegg One:1?

Yes, a full wrap takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, the figure is about 57 ft (17.5 m) to allow for pattern matching.

Can I wrap only the hood or the roof of an One:1?

Yes, you can wrap only the hood or the roof of an One:1. Common partial jobs also include mirror caps, chrome delete on window trim and badges, and clear paint protection film on the front end.

Is an One:1 hard to wrap?

Yes, an One:1 is considered hard to wrap because of its 177.2 in (4,500 mm) length and low body. The two long side doors each require a single large piece of film, and every trim has cameras in the body that need precise cut-outs. The car's curves and air intakes demand careful stretching and relief cuts.

How many generations of the One:1 does this page cover?

This page covers one generation of the One:1, produced in 2014. The catalog lists only the first generation, so all wrap data applies to that single-year coupe.