Wraps by car

Koenigsegg Regera wrap

The Koenigsegg Regera wrap page covers the single-generation sports car and the vinyl wrap film a full wrap takes. The Regera is listed as a targa with two doors, produced from 2015 to now. A complete color change on this body uses about 44 ft (13.5 m) of 60-inch (1.52 m) cast film.

1generations13.5 mof film for a full wrap

Koenigsegg Regera, first generation, factory photo
Koenigsegg Regera, first generation. Factory color shown.

Koenigsegg Regera wrap colors and ideas

  • Regera black wrap
  • Regera white wrap
  • Regera gray wrap
  • Regera silver wrap
  • Regera red wrap
  • Regera blue wrap
  • Regera green wrap
  • Regera yellow wrap
  • Regera orange wrap
  • Regera purple wrap
  • Regera pink wrap
  • Regera teal wrap
  • Regera brown wrap
  • Regera gold wrap
  • Regera chrome wrap
  • Regera color shift wrap
  • Regera carbon fiber wrap
  • Regera camo and patterned wrap

How much vinyl to wrap a Koenigsegg Regera

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–nowtarga (2 doors)179.5 in (4,560 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Regera wrap cost factors

Regera wrap cost depends on the size of the body, the film chosen and the detail of the installation. The 179.5 in (4,560 mm) length and the low targa shape mean more film and more time on the rockers and rear deck. A color change wrap uses about 44 ft (13.5 m) of cast film, while chrome or patterned film uses about 56 ft (17 m). Removing badges, mirror caps and a removable roof adds to the labor.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: targa (2 doors).
  • Targa body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Regera wraps by generation

Swipe sideways. Tap a card for the full description.

Koenigsegg Regera, first generation, factory photo
Factory color shown

2015–now Regera targa (first generation)

2015–nowtarga (2 doors)179.5 in (4,560 mm)

The open top of the first generation Regera is left unwrapped in a full wrap. The fabric or folding hard top panels get no film, so the vinyl ends at the edge of the roof opening. For a folding hard top, each panel is wrapped as its own piece, with the film cut to the panel shape. The body film is laid up to the seal line, with no overlap onto the top.

Targa body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Regera

On a Regera, a partial wrap can cover the hood, mirror caps or rear deck without wrapping the whole car. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is often applied as a clear film on the front end to guard the nose and lower panels.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Koenigsegg Regera: body, cut-outs and film

A Koenigsegg Regera vinyl wrap has to follow the targa body and its 179.5 in (4,560 mm) length. The two-door shape has long, low panels with deep rocker sections and a rear deck that flows into the engine cover. A single-piece roof is not present, so the film stops where the removable top meets the body. Installers plan the film as separate panels for the doors, fenders, front and rear sections.

Regera wrap ideas start with the body details that can be kept or changed. The wrap is cut around the air intakes, the side mirrors and the narrow light openings instead of covering them. The badges and the trim around the windows are removed for a clean edge or left for a chrome delete later. The targa top itself is not wrapped, so the film ends at the edge of the roof opening.

To work out how much vinyl to wrap a Regera, the one body style keeps the estimate simple. There is only one generation in the catalog, so the film need stays at about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. A chrome or patterned film needs more material for matching the direction, about 56 ft (17 m). Installers add extra film for the long rocker panels and the rear deck.

Questions about wrapping a Koenigsegg Regera

How much vinyl does it take to wrap a Koenigsegg Regera?

A Koenigsegg Regera takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film for a full color change wrap. If the wrap uses chrome or patterned film, the estimate rises to about 56 ft (17 m) to allow for pattern matching and waste.

Is the top of a Regera wrapped?

No, the top of a Regera is not wrapped. The targa body has a removable top that is either fabric or a folding hard top, and neither type gets film.

Can I wrap only the hood or the roof of a Regera?

Yes, you can wrap only the hood, the mirror caps or the rear deck of a Regera. A partial wrap can also be a chrome delete on the window trim and badges, or a clear paint protection film on the front end.

Is a Regera hard to wrap?

Yes, a Regera is harder to wrap than a typical sedan because of its low targa body and 179.5 in (4,560 mm) length. The long rocker panels and the rear deck that flows into the engine cover add extra work, and the removable top must stay uncovered.