Wraps by car

Koenigsegg Agera S wrap

This page covers the Koenigsegg Agera S wrap. The car was built for one generation, the 2014 coupe. A full wrap of the newest body takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, you need about 56 ft (17 m).

1generations13.5 mof film for a full wrap

Koenigsegg Agera S, first generation, factory photo
Koenigsegg Agera S, first generation. Factory color shown.

Koenigsegg Agera S wrap colors and ideas

  • Agera S black wrap
  • Agera S white wrap
  • Agera S gray wrap
  • Agera S silver wrap
  • Agera S red wrap
  • Agera S blue wrap
  • Agera S green wrap
  • Agera S yellow wrap
  • Agera S orange wrap
  • Agera S purple wrap
  • Agera S pink wrap
  • Agera S teal wrap
  • Agera S brown wrap
  • Agera S gold wrap
  • Agera S chrome wrap
  • Agera S color shift wrap
  • Agera S carbon fiber wrap
  • Agera S camo and patterned wrap

How much vinyl to wrap a Koenigsegg Agera S

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–2014coupe (2 doors)169.0 in (4,293 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Agera S wrap cost factors

Agera S wrap cost depends on the size of the car and the film you choose. At 169.0 in (4,293 mm) long, this coupe needs about 44 ft (13.5 m) of standard cast film. A chrome or patterned film raises the amount to about 56 ft (17 m). The two large door panels and the camera cut-outs also affect the labor time.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.
  • Every trim has cameras in the body: the film is cut around each lens.

Agera S wraps by generation

Swipe sideways. Tap a card for the full description.

Koenigsegg Agera S, first generation, factory photo
Factory color shown

2014–2014 Agera S coupe (first generation)

2014–2014coupe (2 doors)169.0 in (4,293 mm)

The 2014 Agera S is a small coupe with large door panels. Its length of 169.0 in (4,293 mm) means the roof and hood use less film than a longer car. The two doors are each one big sheet, so the wrap has fewer panels. This body style calls for about 44 ft (13.5 m) of standard film.

Two long side doors: each door is one large piece of film.

Every trim has cameras in the body: the film is cut around each lens.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on an Agera S

For an Agera S, a partial wrap can cover the roof, hood, or mirror caps. A chrome delete covers window trim and badges with black film. Paint protection film (PPF) on the front end is a clear shield for the nose and hood.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Koenigsegg Agera S: body, cut-outs and film

The Koenigsegg Agera S vinyl wrap uses film on a very short two-door coupe. The car is 169.0 in (4,293 mm) long, so the roof and hood are compact. The two long side doors are each one large piece of film, which adds cutting time.

Agera S wrap ideas start with the door pieces and the cameras. The two long doors must be wrapped as single sheets to avoid visible seams. Every trim has cameras in the body, and the film is cut around each lens.

To know how much vinyl to wrap an Agera S, check the generation you have. There is one generation in this catalog, from 2014. Because there are no earlier versions, the film estimate stays the same for all Agera S cars.

Questions about wrapping a Koenigsegg Agera S

How much vinyl does it take to wrap a Koenigsegg Agera S?

A full wrap of a Koenigsegg Agera S takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 56 ft (17 m). The figure is the same for the one generation of this car.

Can I wrap only the hood or the roof of an Agera S?

Yes, you can wrap only the hood or the roof of an Agera S. A partial wrap on this car often covers the roof, hood, or mirror caps. You can also do a chrome delete on the window trim and badges.

Is an Agera S hard to wrap?

An Agera S is not a simple wrap because of its door panels and cameras. The two long side doors must be wrapped as one large piece each, which demands careful handling. Every trim has cameras in the body, so the film must be cut around each lens.

How many generations of the Agera S does this page cover?

This page covers one generation of the Koenigsegg Agera S. That generation is the 2014 coupe.