Wraps by car

Koenigsegg Agera RS wrap

This page covers the Koenigsegg Agera RS wrap in detail. The Agera RS is a two-door coupe built from 2015 to 2017. It is the only generation of this model. A full vinyl wrap of the body takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film.

1generations13.5 mof film for a full wrap

Koenigsegg Agera RS, first generation, factory photo
Koenigsegg Agera RS, first generation. Factory color shown.

Koenigsegg Agera RS wrap colors and ideas

  • Agera RS black wrap
  • Agera RS white wrap
  • Agera RS gray wrap
  • Agera RS silver wrap
  • Agera RS red wrap
  • Agera RS blue wrap
  • Agera RS green wrap
  • Agera RS yellow wrap
  • Agera RS orange wrap
  • Agera RS purple wrap
  • Agera RS pink wrap
  • Agera RS teal wrap
  • Agera RS brown wrap
  • Agera RS gold wrap
  • Agera RS chrome wrap
  • Agera RS color shift wrap
  • Agera RS carbon fiber wrap
  • Agera RS camo and patterned wrap

How much vinyl to wrap a Koenigsegg Agera RS

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–2017coupe (2 doors)169.0 in (4,293 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Agera RS wrap cost factors

The Agera RS wrap cost depends on the film chosen and the labor time. A solid-color cast film requires about 44 ft (13.5 m), while chrome or patterned film needs about 56 ft (17 m). The two long side doors add cutting and fitting time because each is one large piece. Removing badges and trim for a clean edge also affects the final cost.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Agera RS wraps by generation

Swipe sideways. Tap a card for the full description.

Koenigsegg Agera RS, first generation, factory photo
Factory color shown

2015–2017 Agera RS coupe (first generation)

2015–2017coupe (2 doors)169.0 in (4,293 mm)

The first generation Agera RS is a two-door coupe measuring 169.0 in (4,293 mm) in length. The body style means the roof and hood are separate panels, but the doors dominate the side area. For a full wrap, installers order about 44 ft (13.5 m) of standard cast film. Chrome or patterned film requires about 56 ft (17 m) because of pattern alignment.

Two long side doors: each door is one large piece of film.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on an Agera RS

A partial wrap on the Agera RS can cover the roof, hood, or mirror caps. Chrome delete is another option, with black film over the window trim and badges. Paint protection film (PPF) is also available for the front end in clear film. These jobs use less material than a full wrap but still need careful fitting on the Agera RS curves.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Koenigsegg Agera RS: body, cut-outs and film

The Koenigsegg Agera RS vinyl wrap follows the car's compact coupe shape. At 169.0 in (4,293 mm) long, the Agera RS has a smaller footprint than many supercars. Its two long side doors each form one large panel, so the sides need wide, continuous pieces. A wrap installer must plan the film layout around those door seams and the rear deck.

Agera RS wrap ideas center on the long doors and the front splitter. The two side doors are each one large piece of film, so a color change shows off the car's smooth flanks. Chrome delete on the window trim is a precise job because the trim is slim. The rear wing and front splitter can be wrapped separately to add contrast.

How much vinyl to wrap an Agera RS depends on the film type you choose. A standard cast film in a solid color needs about 44 ft (13.5 m) of 60-inch (1.52 m) material. If you pick a chrome or patterned film, the estimate rises to about 56 ft (17 m). The coupe body has no large roof panel changes between production years, so the figure holds for 2015 through 2017.

Questions about wrapping a Koenigsegg Agera RS

How much vinyl does it take to wrap a Koenigsegg Agera RS?

A full Koenigsegg Agera RS wrap takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. That figure is for a standard solid-color vinyl. If you choose chrome or patterned film, the estimate rises to about 56 ft (17 m).

Can I wrap only the hood or the roof of an Agera RS?

Yes, you can wrap only the hood or the roof of an Agera RS. The partial wrap options on this page list the roof, hood, and mirror caps as separate jobs. A shop can also do chrome delete on the window trim and badges.

Is an Agera RS hard to wrap?

Yes, the Agera RS is hard to wrap because of the two long side doors. Each door is one large piece of film, so any mistake means redoing a big panel. The car's 169.0 in (4,293 mm) length and tight curves around the rear deck add time to the install.

How many generations of the Agera RS does this page cover?

This page covers one generation of the Koenigsegg Agera RS. The car was built from 2015 to 2017 as a coupe. There are no earlier or later generations in this catalog.