Wraps by car

Koenigsegg CCXR Trevita wrap

The Koenigsegg CCXR Trevita wrap page covers this limited Koenigsegg sports car of 2009–2010. The catalog lists one generation of the CCXR Trevita. A full vinyl wrap of the newest body takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film.

1generations13.5 mof film for a full wrap

Koenigsegg CCXR Trevita, first generation, factory photo
Koenigsegg CCXR Trevita, first generation. Factory color shown.

Koenigsegg CCXR Trevita wrap colors and ideas

  • CCXR Trevita black wrap
  • CCXR Trevita white wrap
  • CCXR Trevita gray wrap
  • CCXR Trevita silver wrap
  • CCXR Trevita red wrap
  • CCXR Trevita blue wrap
  • CCXR Trevita green wrap
  • CCXR Trevita yellow wrap
  • CCXR Trevita orange wrap
  • CCXR Trevita purple wrap
  • CCXR Trevita pink wrap
  • CCXR Trevita teal wrap
  • CCXR Trevita brown wrap
  • CCXR Trevita gold wrap
  • CCXR Trevita chrome wrap
  • CCXR Trevita color shift wrap
  • CCXR Trevita carbon fiber wrap
  • CCXR Trevita camo and patterned wrap

How much vinyl to wrap a Koenigsegg CCXR Trevita

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2009–2010coupe (2 doors)169.0 in (4,293 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

CCXR Trevita wrap cost factors

CCXR Trevita wrap cost depends on the amount of film and the work on this 169.0 in (4,293 mm) coupe. The base estimate of about 44 ft (13.5 m) of 60-inch (1.52 m) cast film sets the material need. A chrome or patterned wrap raises the film figure to about 56 ft (17 m) and adds cutting time. The two long doors take one large piece each, which affects labour on the wrap.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

CCXR Trevita wraps by generation

Swipe sideways. Tap a card for the full description.

Koenigsegg CCXR Trevita, first generation, factory photo
Factory color shown

2009–2010 CCXR Trevita coupe (first generation)

2009–2010coupe (2 doors)169.0 in (4,293 mm)

The first generation Koenigsegg CCXR Trevita spans 2009–2010, and paint age matters before a wrap. Panels on a car of these years may be original or repainted. A test spot comes before a full wrap to check that the paint holds film safely. This check is part of preparing any CCXR Trevita of this generation.

Two long side doors: each door is one large piece of film.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a CCXR Trevita

A partial wrap on a CCXR Trevita can cover the roof, hood, or mirror caps instead of the whole car. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. These smaller jobs use less film than a full wrap of this coupe.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Koenigsegg CCXR Trevita: body, cut-outs and film

The Koenigsegg CCXR Trevita vinyl wrap follows the coupe body of this 169.0 in (4,293 mm) car. Its two long side doors are each covered with one large piece of film. The short production run means each panel shape is the same on all CCXR Trevita cars. Installers fit the film around the single body style without extra door seams.

CCXR Trevita wrap ideas start with the two long doors that remain in place for wrapping. Each door takes one large piece of film to avoid visible joins on the long panel. The front and rear bumpers stay on the car, so cut-outs follow their openings and edges. The large hood and roof are single panels that can be wrapped on the car.

To know how much vinyl to wrap a CCXR Trevita, start from the one generation sold from 2009 to 2010. All CCXR Trevita cars share the same coupe body and panel sizes. The film estimate for the newest body is about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds waste and brings the estimate to about 56 ft (17 m).

Questions about wrapping a Koenigsegg CCXR Trevita

How much vinyl does it take to wrap a Koenigsegg CCXR Trevita?

A Koenigsegg CCXR Trevita takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film for a full wrap. Chrome or patterned film raises the need to about 56 ft (17 m). The coupe body is 169.0 in (4,293 mm) long with two large doors.

Can I wrap only the hood or the roof of a CCXR Trevita?

Yes, you can wrap only the hood or the roof of a CCXR Trevita. A partial wrap on this car also covers mirror caps as a separate job. These panels are wrapped without doing the whole coupe.

Is a CCXR Trevita hard to wrap?

A CCXR Trevita is a demanding wrap because of its size and door panels. The car is 169.0 in (4,293 mm) long, so panels are large. Each of the two long side doors takes one large piece of film, which needs careful handling.

How many generations of the CCXR Trevita does this page cover?

This page covers one generation of the CCXR Trevita, produced from 2009 to 2010. All CCXR Trevita cars share the same coupe body.