Wraps by car

Koenigsegg CCX wrap

The Koenigsegg CCX wrap page covers the single generation produced from 2006 to 2010. A full vinyl wrap of its targa body takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. Owners planning a color change or paint protection film (PPF) can use these figures to estimate material before a job.

1generations12.5 mof film for a full wrap

Koenigsegg CCX, first generation, factory photo
Koenigsegg CCX, first generation. Factory color shown.

Koenigsegg CCX wrap colors and ideas

  • Koenigsegg CCX black wrap
  • Koenigsegg CCX white wrap
  • Koenigsegg CCX gray wrap
  • Koenigsegg CCX silver wrap
  • Koenigsegg CCX red wrap
  • Koenigsegg CCX blue wrap
  • Koenigsegg CCX green wrap
  • Koenigsegg CCX yellow wrap
  • Koenigsegg CCX orange wrap
  • Koenigsegg CCX purple wrap
  • Koenigsegg CCX pink wrap
  • Koenigsegg CCX teal wrap
  • Koenigsegg CCX brown wrap
  • Koenigsegg CCX gold wrap
  • Koenigsegg CCX chrome wrap
  • Koenigsegg CCX color shift wrap
  • Koenigsegg CCX carbon fiber wrap
  • Koenigsegg CCX camo and patterned wrap

How much vinyl to wrap a Koenigsegg CCX

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2010targa (2 doors)169.0 in (4,293 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Koenigsegg CCX wrap cost factors

The Koenigsegg CCX wrap cost is driven by the amount of film and the hand work on a low, mid-engine sports car. With a 169.0 in (4,293 mm) body and a targa opening, the installer spends more time on edges and cut lines than on a standard coupe. Film choice also moves the figure, since chrome or patterned vinyl needs about 54 ft (16.5 m) for full coverage.

  • Film for a full wrap: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: targa (2 doors).
  • Targa body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Koenigsegg CCX wraps by generation

Swipe sideways. Tap a card for the full description.

Koenigsegg CCX, first generation, factory photo
Factory color shown

2006–2010 Koenigsegg CCX targa (first generation)

2006–2010targa (2 doors)169.0 in (4,293 mm)

The first generation Koenigsegg CCX has a targa roof that is not wrapped in vinyl. The film ends where the painted body meets the fabric top, following the opening line around the cabin. A folding hard top version is wrapped as separate panels of its own rather than as one continuous surface.

Targa body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Koenigsegg CCX

For a smaller job on a Koenigsegg CCX, a partial wrap can cover the hood, mirror caps, or rear deck in film. A chrome delete turns the window trim and badges black for a subtle change. Paint protection film (PPF) on the front end is a clear option that leaves the original color visible.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Koenigsegg CCX: body, cut-outs and film

A Koenigsegg CCX vinyl wrap must be planned around the car's low targa profile and 169.0 in (4,293 mm) length. The single body style means film panels are cut for a compact two-door shape with no separate roof structure. Installers usually allow extra material around the rear deck and the long front fenders.

Koenigsegg CCX wrap ideas start with choosing a finish that follows the sharp lines of the body. The targa top itself is not covered because the fabric panel is not a suitable surface for vinyl. Door mirrors and the front splitter come off for clean edges, while badges are removed before the vinyl goes on.

How much vinyl to wrap a Koenigsegg CCX depends only on the one generation in the catalog. The same body ran from 2006 to 2010, so the film estimate stays at about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. An installer may keep a little extra on hand for the targa seam and the deep front intake areas.

Questions about wrapping a Koenigsegg CCX

How much vinyl does it take to wrap a Koenigsegg CCX?

It takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film to wrap a Koenigsegg CCX. That figure covers the single generation body from 2006 to 2010. A chrome or patterned film adds roughly 54 ft (16.5 m) to the job.

Is the top of a Koenigsegg CCX wrapped?

No, the top of a Koenigsegg CCX is not wrapped. The targa roof uses a fabric panel that vinyl does not bond to, so the film ends where the painted body meets the opening. For a hard top version, only the removable panels would be wrapped as separate pieces.

Can I wrap only the hood or the roof of a Koenigsegg CCX?

Yes, you can wrap only the hood or the roof of a Koenigsegg CCX. A partial wrap on the hood is a common way to change the front look without a full color change. The targa roof panel itself is not wrapped, but the rear deck and mirror caps are also available as partial jobs.

Is a Koenigsegg CCX hard to wrap?

A Koenigsegg CCX is more work to wrap than an average coupe because the body is low and the targa opening interrupts the roof line. The installer must cut clean edges around the fabric top and work carefully over the wide rear haunches. The 169.0 in (4,293 mm) length is compact, but the compound curves add time to the vinyl wrap.